• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.73-77
• /
• 2012

In this article, we designed a wide bandpass filter in order to apply microwave reflectometry for KSTAR. The proposed wide bandpass filter consists of a metamaterial structure which is to get a wide band, a lower insertion loss, and a high skirt. This is applied to VCO's output to enhance the linearity. A pass band is 18-28 GHz and the out of pass band is stopped over 20 dB. To confirm of the metamaterial, we suggest a dispersion diagram. The proposed filter in lower band and upper band of pass band is respectively a left handed and right handed characteristics. A group delay is below 0.5 ns.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.153-166
• /
• 2004

Interplanetary trajectories using the gravity assists are studied for future Korean interplanetary missions. Verifications of the developed softwares and results were performed by comparing data from ESA's Mars Express mission and previous results. Among the Jupiter exploration mission scenarios, multi-planet gravity assist mission to Jupiter (Earth-Mars-Earth-Jupiter Gravity Assist, EMEJGA trajectory) requires minimum launch energy ($C_3$) of 29.231 $Km^2$/$S^2$ with 4.6 years flight times. Others, such as direct mission and single-planet(Mars) gravity assist mission, requires launch energy ($C_3$) of 75.656 $Km^2$/$S^2$ with 2.98 years flight times and 63.590 $Km^2$/$S^2$ with 2.33 years flight times, respectively. These results show that the planetary gravity assists can reduce launch energy, while EMEJGA trajectory requires the longer flight time than the other missions.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.109-112
• /
• 2000

본 논문에서는 신호의 분리와 합성이 가능한 Diplexer를 제작하였다. 저역 통과 여파기와 고역 통과 여파기의 특성을 정합하여 Diplexer로 구현함으로써 신호의 분리와 합성이 가능하다는 것을 시뮬레이션을 통해 확인하였다. 또한 신호의 분리와 합성의 가능성을 입증하기 위해 실제 마이크로스트립구조의 Diplexer를 제작, 측정한 결과 각각의 통과 대역폭 내에서 0.4dB, 0.8dB이내의 삽입손실과 -20dB의 반사손실이 됨을 실험결과를 통해 알 수 있었고 또한, 인덕터의 구현 방법을 마이크로스트립으로 하여 주파수 특성과 재현성을 높였다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.646-648
• /
• 2012

본 연구에서 다루는 복합재료는 알루미늄 폼으로써 다공성 구조체로 고체 알루미늄 금속에 비하여 비중이 1/10 정도로 작고, 충격에너지 흡수가 우수하다. 본 연구에서는 다공성 심재를 갖는 복합재료 알루미늄 폼 코어의 충격실험을 실시하여 기계적 특성을 파악하였다. 시험편은 알루미늄 폼 코어를 갖는 복합재료로써 시험편에 50J의 저 충격에너지를 가하도록 하였다. 그 결과, 모든 실험에서 스트라이커가 상부면재 통과 시 최대하중이 나타났고, 이때의 최대하중 값은 약 5.5 KN으로 나타났다. 또한 최대 하중 발생 시간은 50J일 때 약 4.2 ms가 나왔다. 최대 하중이 발생한 후, 즉 상부 면재 통과 후에 실험에서는 약 10 mm정도를 더 뚫으면서 심재에 까지 손상을 주었지만 하부 면재에는 손상을 주지 못하였다. 이로써 스트라이커가 알루미늄 폼 코어 샌드위치 복합재료를 통과 할 때 상부면재 통과 시 최대 하중이 발생하고 심재를 지나며 서서히 감소되는 것을 볼 수 있었다.

• Water for future
• /
• v.52 no.5
• /
• pp.62-72
• /
• 2019

• Water for future
• /
• v.52 no.2
• /
• pp.64-69
• /
• 2019

• Water for future
• /
• v.54 no.5
• /
• pp.44-52
• /
• 2021

• Water for future
• /
• v.56 no.4
• /
• pp.54-67
• /
• 2023

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.271-277
• /
• 2002

Pyeonghae Series, Giseong Series. Wonnam Series, Pyeonghae Unite gneiss, Hada leuco-granite gneiss are the Precambrian gneisses distributed in the north-eastern part of the Yeongnam massif. Even though there are no difference in lithologies between Pyeonghae and Wonnam Serieses. they have been regarded as different Serieses because of the presence of Giseong Series which has been considered meta-volcanics. However, field investigations reveal that the Giseong Series represents ductile shear zone having meta-volcanics-like appearances in some outcrops. The fact that both Pyeonghae and Wonnam Serieses experienced high grade metamorphism reaching upper amphibolite facies implies that any volcanics between these two Serieses should also occur as high-grade metamorphic rocks at present. The absence of Giseong Series as a low-grade meta-volcanics indicates the absence of logical base to distinguish Pyeonghae and Wonnam Serieses. Therefore, these two Serieses should be regarded as identical Series.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.5
• /
• pp.695-699
• /
• 2003

Traditional soybean sprouting bucket has some problems which are putrefaction and growing inhibition by the high temperature and carbon dioxide in the bucket during culturing. To solve this problems we developed the new soybean sprouting bucket. The new bucket consisted a square shaped bottom which has 5 draining holes (each 10 mm in dia, 2 mm in height) and four side wall which has two rectangular shaped holes (10 cm long, 0.5 cm wide), and the support vessel which 592 tiny draining holes whose center attached a pipe with 36 small holes (each 2 mm in dia). The new one showed lower temperature and carbon dioxide content during culturing, and the putrefaction was lower, whereas growing degree was higher during culturing at 25$\pm$1$^{\circ}C$ than the traditional bucket.