• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.359-364
• /
• 2002

Statistical energy method is widely used for the prediction of vibrational and acoustical behavior of complex structures, such as ship building and automobile in mid-, high frequency ranges. However. in order to convince this SEA result, it is important to verify estimated SEA parameters, e. g. modal density, energy in each subsystem, damping loss factor, coupling loss factor. with possible other method. For modal density parameter, the experimental estimations via Experimental Modal Analysis are checked with those from finite element method for both beam- plate and plate-plate cans. Loss factors are calculated by Lyon's simple method for the two subsystem. finally. modal experiments are carried out by varying the mass added on the junction of two subsystem for the purpose of investigating the influence on the coupling loss factor's behavior.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2491-2497
• /
• 1993

Random vibration of the coupled identical beams subject to band-limted white noise is studied. The mean-square displacements average dspatially over each beam are derived analytically using two different modal analysis techniques and compared to the results by SEA(Statistical Energy Analysis). It is shown that when frequency is high and a large number of modes are included in the frequency band, the modal analysis methods and the SEA yield the same results provided that the loss factors are very small and the modal separation is much larger than the half-power bandwidth.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.371.1-371
• /
• 2002

At lift-off, the jet noise of launch vehicle produces a severe acoustic environment and the loads induced by the acoustic pressure may be damaging to paylaod and equipments. Prediction of the acoustic environment is needed to support the design and test-qualification of components. Currently, such a high frequency problem is usually dealt with by using the SEA, of which the assumptions match reasonably well with the vibro-acoustic condition of system. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.957-961
• /
• 2005

A satellite component must withstand vibration caused when launch vehicle acoustics and engine rumble transfer to it through its structural mount. Components shall be subjected to environmental tests after manufacturing process thus the environmental test conditions are needed for component level test including vibration and shock. This paper deals with derivation of component-level environmental test specifications, especially for solar panels of STSAT-2(Science & Technology SATellite-2). Sine sweep random vibration, and shock test conditions were generated for solar panels by assuming the satellite as single-degree-of-freedom system with a base excitation.

• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.306-312
• /
• 1998

This paper proposes a method for estimating the vibrational power supplied by a machine that generates excitation force to its supporting structure via the coupling points. The basis of the method is that the vibrational power can be calculated using the mechanical impedance and the velocity at the coupling points on the supporting structure. First, a method is described to estimate the mobilities at the coupling points when the machine is not separable from the supporting structure, then the vibrational power is calculated using the estimated mobilities and measured velocities at the coupling points. The mobilities are estimated from the result of impulsive testing of the coupled structure. The method is investigated using an experimental model. The estimated and measured values of the mobilities and the vibrational power are compared. It is shown that the estimated values agree well with the measured values.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.447-453
• /
• 2009

The interior noise of the High Speed Train(HST) is analyzed by applying the statistical energy analysis (SEA) method. The interior of each vehicle is divided lengthwise into nine cavities. Since the rolling noise and aerodynamics noise are expected to be dominant noise sources, they are treated as the noise sources in the model. To further simplify the model, curtains and seats are excluded. The simulation runs involving one-car, three-car and five-car trains are conducted. The maximum predicted noise level is 98.4dB. The results also show that the predicted noise levels are within 0.23% of each other. The results imply that it is not necessary to estimate the interior noise of the train by constructing multiple-car train models. The noise estimate based on just one-car train can be optimal with respect to the computational effort and modeling time.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1413-1419
• /
• 2008

As the improvements of service quality is becoming an important issue the, interior noise level of a train is an important factor of comfortable ride. To reduce the interior noise level, noise sources of the train need to be removed. However, in case with a structure of large scale and multiple noise sources, an estimation of influences of major noise sources, with indentification of its traveling paths needs to be performed. In current state, to improve the interior noise reduction, consideration of sound transmission loss of the train body prior to manufacturing is usually performed. In this study, the sound transmission loss of the train body of new model train of seoul metro's line no.2 under test opeation is measured and modeling of the train body is performed. And train interior noise is predicted using the measured values.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.133-141
• /
• 1994

In this paper, experiences obtained during the development of MASS(Noise Analysis of Ship-board using SEA) are described. The results are summarized as follows. (1) The modelling techniques for ship structure and cabins are suggested. (2) Structureborne and airborne noise for a real ship were measured at sea trial and predicted by NASS. The differences between the two values are acceptably small for the cabins located on higher decks, although problems related with modelling of lower decks and evaluation of radiation efficiency were found.

• Journal of Energy Engineering
• /
• v.14 no.4 s.44
• /
• pp.259-267
• /
• 2005

In an attempt to elucidate combustion mechanism or premixed spray flame in detail, both the enlarged photographing, which was performed for spray cross-sectional images of premixed spray flame, and the cross-correlation PIV, which was performed for consecutive time-series images to obtain instantaneous two dimensional flow field, were applied. This study indicated that CW laser as well as pulse laser could be applied for PIV. Furthermore, the results of cross-correlation PIV, which was self-made PIV program, was shown in good agreement with those of PDA. Therefore, it was verified that cross-correlation PIV using CW laser in this study could be effectively used for observing structure of premixed spray flame.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.378-385
• /
• 2009

In establishing silent environment such as automobile and industrial instrument, the roles of the insulating materials are critical. The proper and effective positioning of insulating materials is essential in the field of noise as well as in designing silent automobile. In this paper, we proposed the systematic and efficient scheme for optimizing complete automotive interiors for noise control. In order to attain this purpose, following analysis has been carried out: First, measuring the Biot parameters of insulating materials and the transmission loss with reflecting the appropriate arrangement of insulating materials has been experimented. In addition, we made comparison among transmission loss by the tools of analysis and verification, experimental value under consideration of various situations of automobile and analysis by the SEA.