• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.179-183
• /
• 2001

Magnetoresistance and Planar Hall effect of Glass/Ni$\sub$83/Fe$\sub$17/(2 nm)/[Cu(2 nm)Ni$\sub$83/Fe$\sub$17/(20 nm)]$\sub$50/ multilayer were measured. Repeated saw tooth like planar Hall effect signal was observed in the range of magnetization reversal process, while no sign of such saw tooth was observed in Magnetoresistance diagram. For the reason of saw tooth like signal, it is supposed that subsequent abrupt domain wall motion of each magnetic layer in the process of magnetization reversal process was observed in planar Hall effect in transverse direction to the current direction. This fine structure of planar Hall effect was observed for applied fields in any direction. Magnetoresistance curve did not show this fine structure of magnetization reversal, of course, since only net magnetization of each layer has to do with the resistivity. Extended research on the reason of this sawtooth like signal should be conducted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1546-1552
• /
• 1993

We proposed an adaptive block truncation coding(BTC) using gradient and a new initial value. We used gradient of sobel operator as a new category classification coefficient to reduce Jagged appearance at edge part. We defined a new initial value to reduce large quantization error in the 4-level quantizer block including edge part. By computer simulations, we showed that the proposed method less computation load, reduced jagged appearance at edge part, also improved PSNR more than the conventional adaptive BTC.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.192-203
• /
• 2004

The AA5182/polypropylene/AA5182 (AA/PP/AA) sandwich sheets have been developed for the application for automotive body panels in the future light weight vehicles with significant weight reduction. It has been reported that the 5182 aluminum sheet shows Luders band because of dissolved Mg atoms that causes fabrication process problem, especially surface roughness. The examination of serration behavior has been made after the tensile deformation of the AA/PP/AA sandwich sheets as well as that of the 5182 aluminum skin at room and elevated temperatures. All sandwich sheets and the 5182 aluminum skin showed serration phenomena on their flow curves. However, the magnitude of the serration was significantly diminished in the sandwich sheet with the high volume fraction of the polypropylene core. According to the results of the surface roughness analysis after the tensile test, the sandwich sheet evidently showed lower Luders band depth than the 5182 aluminum skin. Strain rate sensitivity, m-value, of the 5182 aluminum skin was -0.006. By attaching this skin with polypropylene core which has relatively large positive value, 0.050, m-value of the sandwich sheets was changed to the positive value. The serration reduction of the sandwich sheets was quantitatively investigated in the point of the effect on the polypropylene core thickness variation, that on the strain rate sensitivity. It was found that the serration reduction degree from the experimental results of the sandwich sheet was higher than that from the calculated values by the rule of mixture based on volume fraction of the skins and the core.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.3
• /
• pp.257-292
• /
• 2002

Morphological characters of sections Foetidae(one taxon), Arenariae(one taxon) and Multiflorae(six taxa) of genus Carex(Cyperaceae) were reexamined. The epidermal patterns of perigynium, achene and leaf were investigated using by a scanning electron microscope(SEM) and a light microscope(LM). Morphological characters, such as length and width of stem, leaf, leaf sheath, bract, spike, scale, perigynium and beak of perigynium, length of spike peduncle, size and frequency of stomatal complex of leaf, number of bract, shape of stem transection, scale and apex of scale, beak and base of perigynuim, achene, epidermal cell and cell wall of perigynium, achene, leaf epidermal patterns(fundamental epidermal cell and cell wall, silica body, subsidiary cell), hair, papillae present/absent of perigynium, and leaf were useful for the identification of observed eight taxa. According to the current study, examined eight taxa of sections Foetidae, Arenariae and Multiflorae were distinct from each other with respect to length and width of stem, leaf, bract, perigynium, perigynium beak, length of spike peduncle, shape of bract, scale and apex of scale, perigynium, perigynium beak, hair presence/absence of perigynium and leaf. A key based on data was presented here.

• The Korean Journal of Zoology
• /
• v.32 no.1
• /
• pp.9-13
• /
• 1989

A study of benthic populations on a tidal flat near Inchon has revealed the presence of Amphictene japonica (Nilsson) a large pectinariid polychaete worm not previously documented in Korean waters. Near Inchon it is apparently restricted to silty sands or sandy silts along seaward parts of the intertidal flat. In addition to its large size, A. japonica is distinguished from other pectinariids by means of (1) the posterior rim of the cephalic plaque, which bears 20 to 25 marginal denticulations, and (2) the scaphal hooks, which number 19 to 24 on either side.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.609-615
• /
• 1995

Chip machining에 의한 U$_3$Si 분말제조시 절삭가공조건이 분말 입도 분포에 미치는 영향을 조사하기 위하여 U$_3$Si ingot를 선반에서 초경공구를 사용하여 절삭속도 및 이송속도를 변화시키면서 chip을 가공하였고, 가공된 chip의 형상을 광학현미경으로 관찰하고 칩의 크기를 측정하였다. 모든 절삭조건에서 톱니모양의 칩(saw toothed chip)이 형성되었으며, 일정한 절삭속도에서 공구의 이송속도를 변화시켰을 때 이송속도가 증가함에 따라 칩 두께의 증가와 함께 chip segment의 폭도 증가하여 chip segment 의 크기가 뚜렷이 증가함을 보였다. 또한 chip segment의 크기는 절삭속도 보다는 공구의 이송속도에 크게 영향을 받는 것을 알 수 있었고 분말의 입도 분포에도 크게 영향을 미치는 것으로 나타났다.

• Korean Journal of Ichthyology
• /
• v.20 no.1
• /
• pp.70-73
• /
• 2008

Eight specimens (330.2~431.3 mm TL) of the family Zoarcidae were collected from the costal waters of the Byeonsanbando, Yellow Sea, Korea. They were identified as a Zoarces elongatus Kner based on the following characters: a dorsal fin with 14~16 notch-shaped spinous rays, irregular 13~16 dark spots in a row along the median body and 126~132 vertebrae. We proposed a new Korean name, 'Mu-jeom-deung-ga-si-chi', for the species.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.466-466
• /
• 2010

유도결합형플라즈마(ICP)에서 부유 랑뮤어 탐침에 정현파, 톱니파, 사각파, 삼각파 형태의 전압 파형들을 쉬스에 인가하였을 때, 탐침으로 들어오는 고조파전류들의 특성을 넓은 범위에서 연구 하였다. 탐침으로 들어오는 플라즈마전류파형 및 기생전류파형의 모양과 고조파전류들에 대해 고찰하였고, 각각의 전압파형을 인가하였을 때 다양한 압력과 파워조건에서 부유 랑뮤어 탐침법을 이용하여 전자온도와 플라즈마 밀도를 측정하고, 측정결과는 싱글 랑뮤어 탐침법과 비교하였다. 정현파, 삼각파는 싱글 랑뮤어 탐침법과 잘 일치하는 결과를 보였고, 톱니파는 실험상의 오차로 정확한 측정이 안 되었으며, 사각파는 전류파형의 과도현상으로 인해 측정이 안되었다. 그 외에 기존의 부유 랑뮤어 탐침법과 다르게 부유전위의 변화와 제 1 고조파들의 비를 이용해서 전자온도를 구하는 방법도 소개한다.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.505-513
• /
• 2000

This study suggests new antenna design for polarization diversity. For dual polarization, two port feeding lines are printed on two separate layers and cross-shaped aperture is located on ground between the substrates. For reducing back radiation, a reflector is attached around $\lambda$/4 behind feeding substrates. For wide bandwidth we use a perturbed patch with saw tooth shaped. This perturbation effect causes reduction of antenna size and also reduction of array size. With the antenna proposed here, $1\times4$ array dual polarization antenna for polarization diversity of PCS base station is built. One single element has as large as 10.3%, 11.3% bandwidths at each port, V.S.W.R less than 1.3 and the isolation is less than -40 dB, also array antenna has 13.2% 12.7% band bandwidth, V.S.W.R less than 1.3 the isolation below -36dB and the XPD of 10 dB.