• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.656-662
• /
• 2008

1990년대 중반 이후 다양하고 많은 지반조사 및 실내시험 기술이 도입되어 사용되고 있고, 이제는 상당한 경험과 데이터가 축적되고 있음에도 불구하고 우리나라 또는 우리 지반공학회와 같은 학회 차원의 조사 및 시험 기준 정립이 미흡한 실정이다. 이에 본 논문에서는 국가 차원에서 이미 제정되어 있는 지반공학 관련 조사 및 시험 기준을 선진외국의 기준 현황과 비교검토하여 우리의 현주소를 살펴보았다. 또한, 최근 건설제도의 변화와 사회 전반의 기술발전에 따라 지난 10여년간 다양하고 활발하게 시도되고 있는 실내 토질시험 실시현황 등을 살펴보고 이들에 대한 기준의 추가 제정과 해설집 발간의 필요성을 제기하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.07a
• /
• pp.1-34
• /
• 1999

본 원고는 말뚝기초의 설계에 사용되고 있는 현장 시험법의 특징과 연구결과를 요약정리 한 것이다. 현장토질시험법이 국내에서 본격적으로 사용되기 시작한 것은 1980년도 초반으로 추정하고 있다. 이후 많은 간척사업과 연약지반 개량을 실시하면서 여러 종류의 현장 시험법이 소개되었으며 이러한 기술 발전에 편승하여 말뚝기초 설계에도 현장토질시험법을 이용함으로서 신뢰성 있는 말뚝기초의 지지력산정을 산정코자 노력하고 있다. 본 원고에서는 지금까지 국내에서 주로 사용하고 있는 SPT, CPT, PMT 및 최근 사용실적이 높아지고 있는 DMT의 시험방법, 원리, 관련 토질정수, 말뚝기초 설계에 활용방법에 대하여 국내외 자료를 조사하여 정리하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2146-2150
• /
• 2008

본 연구에서는 용기포항 동방파제 건설이 사곶 수욕장에 미치는 영향을 평판재하시험, 토질분석시험, 위성사진 자료 분석, 파랑, 조류, 수심 등의 현장관측과 파랑, 파랑류, 조류, 그리고 퇴적물 이동 등에 대한 수치모형을 통하여 사곶해수욕장의 동역학적 특성을 파악하였다. 평판재하시험과 토질분석시험 결과 기존의 사곶해수욕장 지역의 지지력 변화는 거의 없는 것으로 나타났으며, 방파제 건설로 인해 퇴적이 진행 중인 지역은 상대적으로 지지력이 낮게 나타났다. 현장관측으로 수집된 파랑, 조류, 수심의 자료는 수치모형의 입력 값으로 사용되었으며, 파랑류 수치모형결과 사곶 해수욕장 부근에서 파향에 따라 약한 소규모 와류가 발생하였으며, 퇴적물이동 수치모형의 경우 국소 와류에 의한 지형변화가 발생하였으며, 남서와 북동에 약간의 퇴적이 발생하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1C
• /
• pp.11-17
• /
• 2011

This study was performed a series of the isotropic compression-expansion tests and the drained triaxial tests with various the relative densities 25%, 50%, 80% and 100% for Baekma river sand. Using the tests results the characteristic of the parameters of Lade's single hardening constitutive model were investigated. The soil parameters Kur and n representing elastic behavior are not much affected by the change of the relative density. The other parameters such as failure criterion (m, ${\eta}_1$), hardening function (C, p) and plastic potential (${\Psi}_2$, ${\mu}$) are in a positive linear relationship with the relative density. Since the soil parameters h and $\alpha$ representing yield function do not change much to the change of relative density and also closely related to failure criterion, they can be replaced by failure criterion ${\eta}_1$. We also observed that predicted values from the Lade's single hardening constitutive model were well consistent with the observed data.

• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.81-96
• /
• 1992

This paper dealt with the influence of experimental error generated inevitably during performing experiments on the granular soil behaviour analysis selecting Lade's Single Work-Hardening constitutive model. Several isotropic compression-expansion tests and a series of drained conventional triaxial tests with various confining pressures for Baekma river sands were performed and the values of parameters for the above model were determined using computer program developed for this study based on regression analysis. By finding the range of the upper and lower bound for deviator stress and volumetric strain versus axial strain dependant on the increase and decrease of the standard deviation from mean value of parameters, sensitivities of all the parameters were examined. Practical use of program to determine the parameters and capability to predict the behaviour of granular soil by Lade's Single Work -Hardening model verified.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2012

In order to review the utility of Lade's single hardening constitutive model, a series of isotropic compression-expansion tests and consolidated drained triaxial tests including as CTC, TC, RTC, and OSP were performed by Baekma river sand with various of stress path. Parameters required in model were determined using these tests. The accuracy of analysis was reviewed by back analysis of test results used to determine the 11 parameters of soil property through the test of each stress path. Also. for verifying the accuracy of prediction for the stress-strain behavior using failure criterion related 9 parameters with correlational equation and constant and yield criterion related parameters h, ${\alpha}$ and ${\eta}_1$, when stress path is different with each other, it has been obtained in the review result of stress path dependent characteristics of the constitutional model through the analyzing results of CTC, TC, RTC, OSP, and fine silica sand tests.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.27-36
• /
• 2008

To derive easily the coefficient of permeability from several other soil properties, the estimation model of coefficient of permeability was proposed using linear regression analysis. The coefficient of permeability is one of the major factors to evaluate the soil characteristics. The study area is located in Kangwon-do Pyeongchang-gun Jinbu-Myeon. Soil samples of 45 spots were taken from the study area and various soil tests were carried out in laboratory. After selecting the soil factor influenced by the coefficient of permeability through the correlation analysis, the estimation model of coefficient of permeability was developed using the linear regression analysis between the selected soil factor and the coefficient of permeability from permeability test. Also, the estimation model of coefficient of permeability was compared with the results from permeability test and empirical equation, and the suitability of proposed model was proved. As the result of correlation analysis between various soil factors and the coefficient of permeability using SPSS(statistical package for the social sciences), the largest influence factor of coefficient of permeability were the effective grain size, porosity and dry unit weight. The coefficient of permeability calculated from the proposed model was similar to that resulted from permeability test. Therefore, the proposed model can be used in case of estimating the coefficient of permeability at the same soil condition like study area.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.87-98
• /
• 2013

This study was performed a series of the isotropic compression-expansion tests and the drained triaxial tests with various the relative densities 40%, 60%, 80% and 95% for bottom ash. Using the tests results the characteristic of the parameters of Lade's single hardening constitutive model were investigated. The soil parameters Kur and n representing elastic behavior are not much affected by the change of the relative density. The other parameters such as failure criterion(m, ${\eta}_1$), hardening function(c, p) and plastic potential(${\psi}_2$, ${\mu}$) are in a positive linear relationship with the relative density. Since the soil parameters h and ${\alpha}$ representing yield function do not change much to the change of relative density and also closely related to failure criterion, they can be replaced by failure criterion ${\eta}_1$. We also observed that predicted values from the Lade's single hardening constitutive model were well consistent with the observed data.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.395-400
• /
• 2012

The stress-strain relationship of soil is dependent on a number of factors such as soil type, density, stress level and stress path. Th accurate stress-stain relationship can be predict using a constitutive model incorporated all influencing factors. In this study, an isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress paths were performed on Baekma river sand to investigate parameters characteristics of Lade's single work hardening model depending on the stress path.. Based on test results, the parameters of yield function (h, ${\alpha}$) are not much influenced by stress level and stress path, the these parameters do affect a little bit of stress-strain behavior. The parameters h and ${\alpha}$ are closely related to failure criterion ${\eta}_1$, they can be replaced by failure criterion parament. We also observed that predicted values from the Lade's single hardening constitutive model are well matched with the observed data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.191-203
• /
• 1992

This paper dealt with the statistical values including mean, standard deviation, variance and coefficient of variation for 14 soil parameters available of Lade's double work-hardening model in order to predict the behaviour of granular soil. 27 sets of all 14 parameters for Baekma river sand were determined by regression using raw data acquired from 12 isotropic compression tests and 9 triaxial compression tests with the variation of confining pressure of 1, 2, and $4kg/cm^2$ respectively 3 times performed during this study. The characteristics of each parameters were investigated. By determining the range of the upper and lower bound dependent on the increase and decrease of the standard deviation from mean value of parameters, sensitivity of all the parameters was scrutinized, by which in turn the influence of experimental error generated inevitably during tests on the determination of soil parameters was also examined.