• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.213-227
• /
• 2002

절토사면의 붕괴원인은 토질 및 지질조건, 지형, 강우, 지하수 및 지표수, 사면형상, 굴착 및 발파와 같은 인위적인 조건, 사면보호공 등과 같이 다양한 영향이 있을 수 있으나 가장 많은 영향을 주는 원인으로 토질 및 지질적인 조건이라고 할 수 있다. 본 논문은 이러한 지질조건에서 붕괴가 발생될 경우의 활동면에 대한 전단강도 추정하는 방법에 있어 역해석법에 의한 활동면의 전단강도 추정을 연구하였다 연구결과 붕괴된 사면에서 화성암은 마찰각 20$^{\circ}$~30$^{\circ}$, 점착력 0~2t/$m^2$의 범위를 가지며 퇴적암에서는 마찰각 $10^{\circ}$~17$^{\circ}$, 점착력 0~2.5t/$m^2$의 범위, 변성암에서는 마찰각 $10^{\circ}$~40$^{\circ}$, 점착력 0~4.0t/$m^2$의 범위가 우세한 것으로 나타났다. 그리고 지질구별 구분에 의하면, 절리에 의해 붕괴가 발생된 경우에는 마찰각 30$^{\circ}$~40$^{\circ}$, 점착력 0~3.5t/$m^2$, 엽리면은 마찰각 30$^{\circ}$~35$^{\circ}$, 점착력 0.5~3.0t/$m^2$, 단층면은 마찰각 11$^{\circ}$~38$^{\circ}$, 점착력 0~3.0t/$m^2$, 층리면은 마찰각 $10^{\circ}$~17$^{\circ}$, 점착력 0~2.5t/$m^2$ 정도의 범위를 갖는 것으로 나타났다.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.167-180
• /
• 2019

Friction piles are being constructed in Southeast Asia (Myanmar, Cambodia, Vietnam, etc.) where the soft ground is deep, and many cases of friction piles are accumulated in terms of experience. In this study, we used the results of four static load test and load transfer test conducted in Myanmar sites to analyze the skin friction of soil layer. In addition, we proposed a relationship chart with skin friction measured in the N-value of Standard Penetration Test (SPT) and the load transfer test result of the single drilled shaft. In the case of Myanmar sites, the range of soil layers was deeper than domestic sites, so the conventional formula of skin friction using the N-value of SPT is different from domestic sites. In sandy layer, fs = 0.096 N in Myanmar sites showed a similar result of the domestic fs = 0.106 N. In clayey layer, fs = 0.315 N, in Myanmar sites showed about 5.0 times higher than the domestic fs = 0.062 N. The results of this study are based on limited data. Therefore, if we analyze the results of more load transfer tests, we can suggest a conventional formula for skin friction according to the N-value. It is expected to be used as important basic data in the future.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.95-98
• /
• 2007

본 연구에서는 설계기준에 제시된 평지 전도 안전율 계산식을 바탕으로 경사지에서의 지반의 저항모멘트를 산정하기 위해 범용 해석 프로그램 L-Pi1e P1us13.8을 사용하여 기존 연구와 검증하고 지반의 일반적인 토질상태별 특성을 고려한 내부마찰각, 접착력, 흙의 단위중량, 지반종류, 사질토 및 점성토 지반계수를 적용하여 각 전주의 근입깊이에 따른 지반의 저항모멘트를 산정하였다. 또한 토질등급에 따른 토질의 상태별 특성이 고려된 4가지 경우를 선정하여 12m 중하중용 전주를 대상으로 경사지의 경사각을 $0^{\circ}{\sim}35^{\circ}$까지 $5^{\circ}$씩 증가시켜 지반의 저항모멘트를 산정하였다. 그 결과 경사지 경사각에 따른 저항모멘트가 감소하는 것을 확인 할 수 있었으며 그에 따른 경사지의 근입깊이 증가가 필요한 것으로 판단된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.160-166
• /
• 2001

The theoretical analyses for stresses induced in axial direction in the buried pipelines are reviewed. The influences of the axially directed stresses on the surface elliptical crack are studied in detail and thus some engineering technical informations are provided to use reliability assessment of buried pipelines. The change in temperature, the effect of inner pressure and soil friction in the buried pipeline constrained in axial direction are included to determine the axial stresses in the buried pipeline. Furthermore, the stress induced by the pipeline bending are also considered. The stress intensity factors calculated by two models such as a simple plane crack and an elliptical surface crack for a circumferential surface elliptical crack are compared.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.417-420
• /
• 2000

The theoretical analyses for stresses induced in axial direction in the buried pipelines are reviewed. The influences of the axially directed stresses on the surface elliptical crack are studied in detail and thus some engineering technical informations are provided to use reliability assessment of buried pipelines. The change in temperature, the effect of inner pressure and soil friction in the buried pipeline constrained in axial direction are included to determine the axial stresses in the buried pipeline. Furthermore, the stress induced by the pipeline bending are also considered. The stress intensity factors calculated by two models such as a simple plane crack and an elliptical surface crack for a circumferential surface elliptical crack are compared.

• Geotechnical Engineering
• /
• v.13 no.6
• /
• pp.37-44
• /
• 1997

In this paper, the effects of crude oil contamination on the geotechnical properties of sand such as compaction characteristics, shear strength, permeability, and bearing capacity are presented. The test results indicate that the compaction characteristics are somewhat influenced by oil contamination. The angle of internal friction of sand based on total stress analysis decreases due to the presence of oil within the pore spaces in Band. The bearing capacity of sand is significantly influenced by oil contamination.

• Geotechnical Engineering
• /
• v.3 no.2
• /
• pp.17-28
• /
• 1987

Reliability of the cone penetration test (CPT) for estimating shear strength of marine soils is investigated in this paper. For sands, the uncertainty about the angle of internal friction is analyzed. It includes the spatial variation of the soil and the model error in the equation used for interpretation. The most serious uncertainty encountered was the error in the interpretative models. Different methods of interpretation gave quite different values. Subjective opinion was introduced to combine all the interpretative models in a systematic manner. For clays, the undrained Shear Strength from the CPT results is usually =derived by empirical correlations between cone resistance and untrained shear strength from laboratory tests or field vane tests, expressed in terms of cone factor and function of overburden pressure. The uncertainty of the undrained shear strength is caused by data scatter of the cone factor in the correlation, model error of the cone factor, effect of anisotropy, and spatial variability of cone resistance. Among these uncertainties, the most serious one was the data scatter of the cone factor in the .correlation. Between the laboratory test and the field vane test used for correlation, the field vane test was more reliable.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.23-35
• /
• 2019

Landslides occur due to heavy rainfall in the summer season. Some of water may infiltrate into the ground; it causes a high saturation condition capable of causing a landslide. Soil properties are crucial in estimating slope stability and debris flow occurrence. The main study areas are Gwanaksan, Suraksan and Bukhansan (Mountain) in Seoul. A total of 44 soil samples were taken from the study area; and a series of geotechnical tests were performed. Physical and mechanical properties were obtained and compared based on region. As a result, among well-graded soils, they are classified as a clayey sand. Coarse-grained and fine-grained contents are approximately 95% and 5%, respectively, with very low amount of clay content. Density, liquid limit and dry unit weight are ranged in $2.62{\sim}2.67g/cm^3$, 27.93~38.15% and $1.092{\sim}1.814g/cm^3$. Cohesion and internal friction angle are 4 kPa and $35^{\circ}$ regardless of mountain area. Coefficient of permeability is varied between $3.07{\times}10^{-3}{\sim}4.61{\times}10^{-2}cm/sec$; it means that it results in great seepage. Permeability is inversely proportional to the uniformity coefficient and is proportional to the effective particle size. In the formal case, there was a difference by mountain area, while in the latter, the tendency was almost similar.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.278-278
• /
• 2022

2020년 집중호우로 인하여 우리나라 전국에 걸쳐 약 2,000여 곳의 산사태, 토석류가 발생하였고 약 1,217ha의 피해 면적이 발생하였다. 피해지역의 특히 생활권 중심의 사면과 계류의 관리 필요성이 높아지고 있다. 산림청 산사태정보시스템에서는 토양함수지수가 80% 도달 시 주의보, 100% 도달 시 경보를 발령하는 대국민 서비스를 제공하고 있다. 본 연구에서는 토층의 깊이에 따른 함수비 분포에 따라 토석류의 발생 가능성에 대한 분석을 수행하고자 하였으며, 토양함수는 기상 수치모델에 의한 예측 강우 자료를 활용하였다. 예측 강우 모델은 토석류가 주로 발생하는 여름철 집중호우 시기인 남서풍을 고려하여 도메인을 구성하였고 산림의 증발산 및 토양수분 모의 정확도 향상을 위해 임상도와 토지피복도를 사용하여 보정하였다. 토층내 토양수분의 함량은 토질에 따라 그 특성이 다르기 때문에 토질과 관련한 주제를 이용하여 토양정보를 활용하였다. 내부마찰각, 점착력, 단위중량, 밀도, 지질도, 지형경사, 표고, 유효토심에 대한 정보를 구축하여, 예측강우에 따라 토층의 수분 함량을 추정하여 붕괴 발생 가능성을 분석하였다. 2006년 평창지역에서 발생한 토석류에 대하여 수행하였으며 토층의 심도는 0.5~1m 범위의 분포에 대하여 체적함수에 따른 실제 토석류 발생에 대한 검증을 수행하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.842-847
• /
• 2007

In this study, for the purpose of estimating the resisting moment of sloped ground based on level ground fall down safety equation in design specification, compute it depends on penetration depth of concrete pile applying modulus of foundation about the angle of internal friction, cohesion, unit weight of soil, classes of the ground, sandy or clay soil, and verify established study using L-Pile Plus13.8. Also, select four cases that characteristics of soil depending on the soil grade is considered and compute the 12m length concrete pile's resisting moment of the ground those angle is changing from $0^{\circ}{\sim}35^{\circ},\;step\;5^{\circ}$. In the result, identify that the resisting moment of ground decreases depending on ground slope. Thus, increasing of penetration depth is required.