• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.61-67
• /
• 2009

A non-discharged system of sequentially physico-chemical water treatment was used to treat the contaminated water produced from washing system of soils according to full-scale soil washing. After washing the TPH contaminated soils, the remaining concentrations of COD$_{Mn}$, SS, and n-hexane were analyzed for each compartment to estimate the treatment efficiencies of non-discharged system. Three times of sampling events were conducted for 4 different compartments (sediment tank, flocculation tank, oil/water separator, and process-water tank). In addition, soil washing efficiencies and concentrations of each parameter (COD$_{Mn}$, SS, and n-hexane) for process-water tank were analyzed for about 8 months. As results, the average efficiency of soil washing was high to have 95.9%, regardless of the condition of TPH contamination level for soils, as well as the concentrations of COD$_{Mn}$, SS, and n-hexane in the process-water tank were below the regulation limits of the Water Environmental Conserveation Act. Accordingly, the full-scale washing treatment system in this study could make the washing water 100% recycled which lead the system to be environmentally-friendly and economical.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.53-60
• /
• 1999

Dissolution properties for the 6 inorganic pollutants (As, Cd, Cu, Pb, Zn, Cr) in soils have been studied. These 6 inorganic pollutants were spiked to 3 kinds of fresh soils which were sand, clay, and loam. The dissolution properties of the prepared samples were investigated under the various extracting conditions such as extracting time, acid concentration, particle size, etc. in order to obtain basic information about the process of extraction test and improvement of related analytical methods. As the results, dissolution properties were affected mainly by acid concentration in extracting procedure and mineral composition of soils. On the other hand, extracting time, sort of acids and particle size of soils had a little influence on the dissolution properties. Cd revealed very high dissolving efficiency and As was very low in whole extracting test.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.61-68
• /
• 2006

Soil washing techniques coupled with high pressure air jet were applied for diesel-contaminated soils sampled by an underground oil reservoir of which the initial total petroleum hydrocarbon (TPH) ($2,828{\pm}206\;mg/kg$) exceeded 5 times of current standard level (500 mg/kg) regulated by the Soil-Environment Conservation Law. Through several tests, we found that the position of impeller has a critical impact for washing efficiencies. The highest washing efficiency was obtained at an oblique angle (30 degree) for the impeller and optimized mixing speed (300 rpm) that could have high shearing forces. Considered economical and feasible aspects, the optimum mixing time was 10 min. Rate constants of TPH removal derived from the first-order equation were not linearly increased as mixing speed increased, indicating that mechanical mixing has some limits to enhance the washing efficiencies. Application of high-pressure air jet in washing process increased the washing efficiency. This increase might be caused by the fact that the surface of micro-air bubbles strongly attached hydrophobic matters of soil particles. As the pressure of air jet increased, the separation efficiencies of TPH-contaminated soil particles increased. In the combined process of high-pressure air jet and mixing by impeller, the optimum mixing speed and air flow-rate were determined to be 60 rpm and $2\;kg/cm^2$, respectively. Consequently, the washing technique coupled with high-pressure air jet could be considered as a feasible application for remediating petroleum-contaminated soils.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.788-792
• /
• 2009

Railroad is well known for eco-friendly transportation system. But, for past few decades, there might be happened many contamination acts in railway facility sites. Industrial and municipal solid wastes produced to maintain and fix trains were dumped to underground of railroad depot area. To develop and reconstruct this area, we should remediate the contaminated soil and ground water. This study was conducted to evaluate the soil pollution status of railroad depot and propose the optimum remediation processes. Our investigation showed that main pollutants sources were TPH and some heavy metals from the dump site. The surveying results for the soil under rail track and crossing nose areas showed TPH contamination from crossing nose area causing lubricant agent. It could be use and rehabilitate the railroad facility areas to an intended purpose with an application of well designed in-situ and ex-situ remediation processes.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.546-550
• /
• 2016

Over 60~70% of the domestic soil contamination have occurred by petroleum products. B T E X including benzene, toluene, ethylbenzene, xylene and total petroleum hydrocarbon (TPH) have to be inspected for the contaminated soil by petroleum products. An accurate contamination analysis is necessary to estimate the are of contaminated soil and also establish an appropriate purification scheme. In this study, we analyzed a sectional TPH pattern for current domestic distributed petroleum products. Also, the TPH content was analyzed by compensating the defect of current Korea standard analytic methods for soil where the analytic range is just for $C_8{\sim}C_{40}$. The light distillate petroleum products such as gasoline and solvent 1 showed the maximum of 85% difference in the TPH content between the standard analytic and improved methods.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.100-106
• /
• 2007

The objective of this study was to evaluate the efficiency of $(NH_4)_2HPO_4$, $Na_2HPO_4{\cdot}12H_2O$, $CaHPO_4{\cdot}2H_2O$, $Ca(H_2PO_4)_2{\cdot}H_2O$ and $H_3PO_4$ for the stabilization of soils contaminated with multi-metals containing Pb, Cd and As. The application rate of stabilizers to soils was determined based on $PO_4/Pb_{total}$ molar ratio of 0.5, 1, 2, 4. The results of Korea Standard Test and TCLP (EPA Method 1311) showed the reduction of metal leachabilities below the regulatory limits for Pb and Cd when $H_3PO_4$ and $Ca(H_2PO_4)_2{\cdot}H_2O$ were applied. However, stabilization efficiency for Cd was low and in case of As leaching concentration increased rather. It is considered that $PO_4$ reacted effectively $Pb^{2+}$ due to leaching Pb under low pH condition created by adding $H_3PO_4$. Accordingly Pb was stabilized by dissolution and precipitation of hydroxypyromorphite. From the change of metals fraction using sequential extraction procedure when $H_3PO_4$ applied as a stabilizer, we confirmed that residual fraction increased more than 60% and this result was accorded with XRD analysis that detected only hydroxypyromorphite peak in $H_3PO_4$.

• The Korean Journal of Ecology
• /
• v.27 no.5
• /
• pp.291-300
• /
• 2004

This study was carried out to investigate the relationship of occurrence and distribution of Eupatorium rugosum by forest types and soil characteristics in Mt. Namsan in Seoul, Korea. E. rugosum is designated as a harmful non-indigenous plant in ecosystem by the Natural Environment Conservation Act in Korea. E. rugosum grew along roadside and in valleys with some favorable light conditions. E. rugosum occurred in aggregations under Pinus densiflora and Robinia pseudoacacia communities. And it was sparse in forests of Quercus mongolica and P. koraiensis. The representative herb layer species were Oplismenus undulatifolius, and Parthenocissus tricuspidata in the E. rugosum communities. There was a significantly negative correlation between the coverage of E. rugosum and the coverage of tree layer. However, the result of ANOVA of E. rugosum coverage by dominant species of tree layers did not show a significant difference (p>0.05). The level of soil moisture content, organic content, and pH, was slightly higher in communities with E. rugosum than without, but it was statistically non-significant difference. However, it was found that the coverage of E. rugosum was very significantly negative correlated with the depth of top soil profile (litter and fermentation layer, p<0.05).

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.185-192
• /
• 2010

The objective of this study was to investigate the effectiveness of stabilization for army firing range soil highly contaminated with Pb (total Pb: 29,000 mg/kg) using calcined waste oyster shells. The calcination was conducted to activate quicklime from calcite. In order to evaluate the effectiveness of calcination, both natural oyster shells (NOS) and calcined oyster shells (COS) were applied to the Pb contaminated soil. Stabilization was conducted by mixing the contaminated soil with oyster shell media at 5-20 wt% and cured for 28 days. Following 28 days of curing, Pb leachability was measured based on the Korean Standard Test method (0.1 N HCl extraction). The treatment results showed that the COS treatment outperformed the NOS treatment. All of the NOS treatments failed to meet the Korean warning standard of 100 mg/kg. However, the Pb concentrations were significantly reduced to 47 mg/kg and 3 mg/kg upon 15 wt% and 20 wt% COS treatments, respectively which passed the Korean warning standard. Moreover, -#20 mesh materials were more effective than the -#10 mesh materials in effectively reducing Pb leachability. The scanning electron microscopy (SEM)-energy dispersive X-ray spectroscopy (EDX) results indicated that Pb immobilization was strongly linked to Al and Si.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.15-25
• /
• 2008

Contamination level assessment of harbor dredged materials is carried out for beneficial use, which generated annually due to port construction and maintenance of harbor channel. The basic purpose of environmental risk assessment was a scientific approach to susceptibility of hazard risk to human's health from different dredged materials. And this paper proposes a guideline of safely beneficial use of dredged materials at both industrial area and residental area, generated from major port execution throughout a sound investigation of their contamination levels. Newly proposed guidelines were in general higher levels compared to both current guidelines of treatment and use of dredged materials and soil environment protection levels. Finally, environmental assessment results of dredged material contamination generated in major ports of Korea for beneficial use based on pre-assessment environmental levels show that some port's dredged materials contain heavy metals such as Cd, As, Cr and Zn, more than base levels which requires more precise contamination investigation. Others were found to be very appropriate for beneficial use.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.1
• /
• pp.28-34
• /
• 1999

This study was carried out to assess heavy metal pollution at 16 abandoned mining areas and to get basic data for phytoremediation. In most of surveyed area, there was no vegetation cover and soil reaction shows in low to moderate pH. Low CEC, low organic matter content were the general properties of these soils. Heavy metals content of these soils were exceed background level of unpolluted soil in Korea, especially Cu content was 2,634mg/kg at Jeil site, 3,415mg/kg Zn, 8.03mg/kg Cd at Yonhwa 2 site. This is far above tolerance limit In plant survey, very often observed plants were Pinus densiflora, and Rohinia psuedo-acacia in woody plant, Artemisia princeps, and Dianthus sinensis in herbs. Artemisia princeps had higher concentration of Zn, Cd and Dianthus sinensis had higher concentration than other plants. From the results, heavy metal concentration in plants and plant's ecotype properties, could be said that Artemisia princeps and Miscanthus sinensis have a potential of soil remediation plant. More studies are demanded to find the heavy metal tolerance species and to understand physiology property of tolerance plants, soil condition, climate etc., for successful soil remediation by plants.