• Microbiology and Biotechnology Letters
• /
• v.32 no.1
• /
• pp.72-77
• /
• 2004

Previously, we synthesized a novel Cyclin-dependent kinase inhibitor, MCS-5A. Also, we investigated the involvement of cell cycle regulatory events during MCS-5A-mediated apoptosis in HL-60(+p16/-p53) cells with up-regulation of p16 protein expression. In contrast, apoptosis was not observed in A549(-p16/+p53) cells. Therefore we propose that $p16^{INK4A}$ is a key enzyme for inducing apoptosis. In the present studies, we have explored the mechanism of $p16^{INK4A}$ -mediated cytotoxicity and the role of p16.sup INK4A/ overexpression in the induction of apoptosis in human tumor cells. The tumor suppressor gene $p16^{INK4A}$ is known as a cyclin-dependent kinase inhibitor (CKI) and cell cycle regulator. We expressed wild type $p16^{INK4A}$ in pcDNA3.1 vector and then transfected into non-small cell lung cancer (NSCLC) cell expressing different statue of p16$^{INK4A}$, p53 gene〔A549(-p16/+p53), H1299(-p16/-p53) and HeLa(+pl6/+p53) cell line〕. TUNEL assay (including propidium iodide staining following transfection of these cell line with pcDNA3.1-pl6) indicate that p16$^{INK4A}$-mediated cytotoxicity was associated with apoptosis. This is supported by studies demonstrating an induction of caspase 3 cleavage due to the transfection of A549, H1299 and HeLa cells with pcDNA3.1-pl6. These results suggest that p16$^{INK4A}$ has a new function of inducing apoptosis which is not related with the function of tumor suppressor gene p53.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.1-15
• /
• 2005

Pathogens, insects and weeds have significantly reduced agricultural productivity. Thus, to increase the productivity, synthetic agricultural chemicals have been overused. However, these synthetic compounds that are different from natural products cannot be broken down easily in natural systems, causing the destruction of soil quality and agricultural environments and the gradually difficulty in continuous agriculture. Now agriculture is faced with the various problems of minimizing the damage in agricultural environments, securing the safety of human health, while simultaneously increasing agricultural productivity. Meanwhile, plants produce secondary metabolites to protect themselves from external invaders and to secure their region for survival. Plants infected with pathogens produce antibiotics phytoalexin; monocotyledonous plants produce flavonoids and diterpenoids phytoalexins, and dicotylodoneous plant, despite of infected pathogens, produce family-specific phytoalexin such as flavonoids in Leguminosae, indole derivatives in Cruciferae, sesquitepenoids in Solanaceae, coumarins in Umbelliferae, making the plant resistant to specific pathogen. Growth inhibitor or antifeedant substances to insects are terpenoids pyrethrin, azadirachtin, limonin, cedrelanoid, toosendanin and fraxinellone/dictamnine, and terpenoid-alkaloid mixed compounds sesquiterpene pyridine and norditerpenoids, and azepine-, amide-, loline-, stemofoline-, pyrrolizidine-alkaloids and so on. Also plants produces the substances to inhibit other plant growths to secure the regions for plant itself, which is including terpenoids essential oil and sesquiterpene lactone, and additionally, benzoxazinoids, glucosinolate, quassinoid, cyanogenic glycoside, saponin, sorgolennone, juglone and lots of other different of secondary metabolites. Hence, phytoalexin, an antibiotic compound produced by plants infected with pathogens, can be employed for pathogen control. Terpenoids and alkaloids inhibiting insect growth can be utilized for insect control. Allelochemicals, a compound released from a certain plant to hinder the growth of other plants for their survival, can be also used directly as a herbicides for weed control as well. Therefore, the use of the natural secondary metabolites for pest control might be one of the alternatives for environmentally friendly agriculture. However, the natural substances are destroyed easily causing low the pest-control efficacy, and also there is the limitation to producing the substances using plant cell. In the future, effects should be made to try to find the secondary metabolites with good pest-control effect and no harmful to human health. Also the biosynthetic pathways of secondary metabolites have to be elucidated continuously, and the metabolic engineering should be applied to improve transgenics having the resistance to specific pest.

• The Korean Journal of Mycology
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1974

1. The mycelial growth and sporulation of Mycogone perniciosa was compared on modified Czapek's media deficient in carbon source, nitrogen source, K,Mg, P or the heavy metal elements. The mycelial growth was significantly reduced in solution cultures lacking Mg, K or P and only a trace of growth occurred in solutions lacking carbon source or nitrogen source. Most sparse sporulation and smaller chlamydospores than on any of deficient agar media occurred on agar media dificient in carbon source or nitrogen source. 2. In both potato dextrose agar and malt extract solution, growth of the fungus was optimum at $25^{\circ}C$, and undetectable at $10^{\circ}C$ and $35^{\circ}C$. 3. Optimum pH for growth of this fungus was 7.0. 4. This fungus was killed in soil when exposed to $50^{\circ}C$ or higher for 20 minutes or more.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.95-111
• /
• 2004

This research sought to determine the status of the installation and operation of composting facilities of domestic public resource-making facilities and come up with corresponding improvement measures. The composting facilities were the most extensively installed of related facilities with over a 0.5 ton treated volume per day. The monthly and yearly carry-in volume of food waste were found to stand at 1,101.7 tons per day and 930.9 tons per day, thus falling short of the average planned volume of 1,270.9 tons. Many composting facilities, which were installed in areas for which factory registration were not approved, did not get approvals. Composting facilities underwent operation stoppage mainly due to faulty fermentation and crushing equipment. Mainly metals contained in food waste caused faults to the crushing equipment, thus requiring a facility designing against faults and corrosion. The initial water content was found to stand at 50-60%, thus complying with the requirement. However, since the composting food waste had an appropriate mixture of sawdust, food waste, and returned compost, it should meet the initial conditions. For fermentation facilities, the duration time for fermentation was 15 days, and post-fermentation tanks required 21 days of duration time, thus establishing the minimum criteria. However, some facilities did not meet the requirements, taking more time in decomposition, thus suggesting a need to determine the duration time according to facilities. In composting food waste, microorganism-based thermal oxidizer-operated fermentation tanks should be used to ensure an economic operation. On the contrary, 14 out of 25 survey targets heated fermentation tanks in any form. These thermal facilities contain the growth of bacteria, lowering chemical reaction in composting; thus composting facilities should be basically designed to use microorganism-based thermal oxidizers in drying water. An average daily volume of food waste and supplementary materials that was injected in producing compost was 22.8 tons. This volume produced 7.3 tons of compost per day, decreasing 68%. Properties of produced compost were analyzed by its color, absence or presence of remaining decomposition heat, and smell, to assess the quality. As a result, the composting process was not properly installed nor operated in about 50% of composting facilities. Compost should be produced to be soil-friendly.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.50-58
• /
• 1995

These studies were carried out to develop a system for non -destructive and continuous measurement of fresh weight and to analyse the growth response of leaf lettuce under the different nutrient solution and light condition with this system. The developed measurement system was consisted of four load cells and a microcomputer. The output from the system was highly positive correlation with the plant fresh weight above the surface of the hydroponic solution. The top fresh weight of plant could be measured within the error $\pm$ 1.0g in the range of 0 - 2000g. The top fresh weight of leaf lettuce increased 44 times at 18th day after transferring to the nutrient solution, and the maximum growth rate was observed at 13th day after transferring. The growth rate was 10.7- 29.6% per day during 18 days. Optimum concentration of the nutrient solution for the growth of lettuce was 1.4 - 2.2 mS/cm of EC level. When the light condition was changed from dark to light, the fresh weight was temporarily decreased, but the fresh weight increased under the opposite condition. Top fresh weight of leaf lettuce in the darkness normally increased within 12 hours after darkness treatment, and then slowly increased until 78 hours under continuous dark condition. After that times, the fresh weight began to decrease.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.1-14
• /
• 1970

The following results were obtained by surveying the productivity of mulberry fields in Korea. 1. The productivity of mulberry field per 10a in which cocoon can be yield belongs to the range of 9.8∼105kg, and among them the productivity of 20 to 60kg was chiefly distributed. And their average was 50.2kg. 2. In general, the larger the mulberry field in scale per a person is, the lower the productivity of it is, but about 6.6 ares per a person was estimated to be economic scale for high productivity. 3. As far as the texture of soil is concerned, sandy-loam and loam contained a capacity of higher productivity while others like clay and sand that of lower productivity, And the depth of surface soil must be at least 50cm, although 70cm's depth of surface sail could bring about high productivity. 4. Fertilization of 900kg's compost on planting and 1,200kg's that after planting could enhance the productivity, because the use of compost have a positive relation to the productivity. 5. The greater the number of farmer's domestic animals is as a source of organic matter the higher the productivity is. 6. In the case of fertilization of 1,200kg compost, the amount of 20kg's nitrogen per 10 ares as chemical manure was best for high productivity. However, fertilization of 14.7kg's nitrogen as average amount of that, which is far below the standard amount, had been a factor to reduce the productivity of mulberry field. 7. In pruning the low-cut form resulted in high productivity, but as their shape become taller due to the lack of techniques, they were turned out to be non head pruning, thus to produce poor harvest of leaves. 8. The pure mulberry fields showed better productivity than others such as wide and narrow ridge planting and inter-crop planting. 9. As for the degree of planting density, at least 800 trees per 10 ares should be planted to increase the productivity, although the planting of 713 trees per 10 ares could be possible in case of the low stemmed pruning. 10. The hole and tranch in planting must be digged as wider and dipper as possible far the better growth of mulberry tree. 11. On the whole, varieties like NOsang and Y oung-cheun choowoo had a tendency of lower productivity.

• The Journal of Society for e-Business Studies
• /
• v.8 no.2
• /
• pp.99-111
• /
• 2003

By virtue of diverse advantages derived from digital media, eBook is getting started to use. And many market research agencies have predicted that its market will be greatly expanded soon. But against those expectations, copyright-related problems and the difficulties of its accessing inherited from various eBook content formats become an obstacle to its diffusion. The first problems can be solved by DRM technology. And to solve the second problems, each nation has published its own content standard format. But the domestic standards are useful only the domestic level, they still leave the problems in the national level. The variety of content formats has created a demand for mechanisms that allow the exchange of eBook contents. Therefore we study the mapping relations between eBook contents for conversion. To define the mapping relations, first we extract the mapping both between eBook contents and between normal XML documents. From those mappings, we define seven mapping relations and classify them by cardinality. And we analyze the classified relations, which can be generated by automatic, or not. Using these results, we also classify the eBook content conversion as automatic, semi-automatic, and manual. Besides, we provide the conversion templates for mapping relations for automatic generation of conversion scripts. To show the feasibility of conversion templates, we apply them to the eBook content conversion. Experiment shows that our conversion templates generate the conversion scripts properly. We expected that defined mapping relations and conversion templates can be used not only in eBook content conversion , but also in normal XML document conversion.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.63-70
• /
• 1998

This study was carried out to investigate the interaction of selenate and sulfate ion in nutrient solution supplyed with selenate ion. At early growth stage, the growth of Mongolian wormwood was best at 3mM sulfate ion and 2mg/$\ell$Na$_2$SeO$_4$ treatment. As they were grown and matured, at the later growth stage, the effect of antagonism between selenate and sulfate ion on the growth of each plant decreased. At supplying with selenate ion in nutrient solution, the uptake of selenate by plant had negative correlation with sulfate ion concentration in nutrient solution. The higher sulfate ion concentration, the less selenium uptake. However, the effect of antagonistic interaction of selenate and sulfate ion on the selenium uptake increased with plant age. Whereas, the uptake of sulfate ion had positive correlation with sulfate ion concentration in nutrient solution at supplying with selenate ion in nutrient solution. The uptake of sulfate ion increased with increase of sulfate ion concentration in nutrient solution. The effect of this interaction with selenate and sulfate ion increased with growth and maturity of plant. However, at 3mM sulfate ion concentration in nutrient solution, sulfate ion concentration in plant tissue decreased markedly.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2008

The world demand of ethanol as an alternative fuel for gasoline is increasing rapidly because of high oil price and global climate change. Most of ethanol is currently produced from corn grain or sugars in sugarcane and sugar beet. Because these sources compete with foods and animal feed and are not expected to be enough for future demand of ethanol. Thus, cellulosic ethanol from agricultural residues or wood has to be commercialized in near future. Typical cellulosic ethanol production consists of pretreatment, enzyme hydrolysis, fermentation and product separation. This paper reviews the principles and status of each step and discusses issues for cellulosic ethanol production.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.2
• /
• pp.88-100
• /
• 1998

Since fractures may serve as major conduits of groundwater flow in crystalline rocks, characterization of conductive fractures is especially important for interpretation of flow system. In this study, characterization of fractures to investigate hydraulically conductive fractures in gneisses at an abandoned mine area was performed. The orientation, width, length, movement sense, infilling materials, spacing, aperture, roughness of both joints and faults and intersection and connectivity to other joints were measured on outcrops. In addition, characteristics of subsurface fractures were examined by core logging in five boreholes, of which the orientations were acquired by acoustic televiewer logging from three boreholes. The dominant fracture sets were grouped from outcrops; GSet 1: N50-82$^{\circ}$E/55-90$^{\circ}$SE, GSet 2: N2-8$^{\circ}$E/56-86$^{\circ}$SE, GSet 3: N46-72$^{\circ}$W/60-85$^{\circ}$NE, GSet 4:Nl2-38$^{\circ}$W/15-40$^{\circ}$SW and from subsurface; HSet 1: N50-90$^{\circ}$E/55-90$^{\circ}$SE, HSet 2: N10-30$^{\circ}$E/50-70$^{\circ}$SE, HSet 3: N20-60$^{\circ}$W/50-80$^{\circ}$NE, HSet 4: N10-50$^{\circ}$E/$\leq$40$^{\circ}$NW. Among them, GSet 1, GSet 3 and HSet 1, HSet 3 are the most intensely developed fracture sets in the study area. The mean fracture spacings of HSet 1 are 30-47cm and code 1 fractures, such as faults and open fractures, comprise 21.0-42.9 percent of the whole fractures in each borehole. HSet 3 shows the mean fracture spacings of 55-57cm and the ratio of code 1 fractures is 15.4-26.9 percent. In spite of the mean fracture spacing of 239cm, code 1 fractures of HSet 4 have the highest ratio of 54.5 percent. From the fact that faults or open fractures have high hydraulic conductivity, it can be inferred that the three fracture sets of N55-85$^{\circ}$E/50-80$^{\circ}$SE, N20-60$^{\circ}$W/50-75$^{\circ}$NE and N10-30$^{\circ}$E/$\leq$30$^{\circ}$NW from a fracture system of relatively high conductivity. It is indirectly verified with geophysical loggings and constant injection tests performed in the boreholes.