• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.56-61
• /
• 1997

A study was carried out to find out the basic information in physical properties for selection and manufacturing the good seedling media through the analysis of the physical properties, such as particle size, water retention and three phases of the major horticultural substrates. Easily available water(EAW), the water contents between 1kPa and 5kPa water potental, was highest in peatmoss with 39%, and perlite 34.0%, vermiculite 16.9%, but the values of osmunda and bark were lower than 4.8%. Water buffering capacity(WBC), the water content between 5kPa and 10kPa, was 6.1% in peatmoss and 2.3% in vermiculite but it was lower than 1.0% in other substrates. To adjust the suitable range of water potential at crossing point of water and air curves to 1.5~2.5kPa, more finer materials were needed in osmunda and bark, and more coarser materials must be added to peatmoss, perlite and vermiculite. Water potentials of substrates in saturated pot condition were equivalent to 2.2kPa in peatmoss and others were ranged in 1.0kPa to 4.3kPa of water potential in pressure chamber.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.517-526
• /
• 2005

In Korea, the methods of estimating groundwater recharge can categorized into two groups. One is baseflow separation method by means of groundurater recession curve, the other is water level fluctuation method by using the data from groundwater monitoring wells. Baseflow separation method is based on annual recharge and lumped concept, and water-table fluctuation method is largely dependent on monitoring wells rather than water budget in watershed. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, these methods have various limits to deal with these characteristics. For this purpose, the method of estimating daily recharge rate with spatial variability based on distributed rainfall-runoff model is suggested in this study. Instead of representative recharge rate of large watershed, the subdivided recharge rate with heterogeneous characteristics can be computed in daily base. The estimated daily recharge rate is an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers. Therefore, the newly suggested method could be expected to enhance existing methods.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.43-51
• /
• 2001

Now our ocean environment pollution is very serious. Its harm hinders in marine breeding and the safe navigation of ships at the coast. We have used an assembly system for a measure taken against environment pollution like this. But, here are some problems awaiting solution. First, most of combustible materials among ocean waste are high polymer, so it is necessary some special equipment to incinerate them. In the process we can't overlook air pollution by exhaust gas. Also, when we reclaim these wastes, we remember that they can't be decomposed naturally and leaking water may pollute soil. Thus now a days new treatment method has been developed, it recycles and doesn't product secondary pollution materials by recovering oil from pyrolysis. For it, this study investigated chemicalㆍphysical properties of wastes. And it found condition of recovering the most oil. Also it probed that the variation of temperature raising speed affects the weight reduction characteristics of wastes. Also, while studying recovered oil by waste pyrolysis and the rate of non-condensing gas in accordance with the variation of temperature raising speed. Finally we had confidence the development of pyrolysis oil recovery would succeed because we carried out evaluation at an economic point of view about it.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.355-361
• /
• 2006

Artificially crushed sands occupy approximately 30 percent of the total consumption in South Korea. The demand for the crushed sands is expected to rise in the future. Most manufacturers use granitic rocks to produce the crushed sands. During the manufacturing process, fine fractions (i.e., sludges or particles smaller than 63 microns) are removed through the process of flocculation. The fine fraction occupies about 15% of the total weight. The sludges are comprised of quartz, feldspars, calcite, and various kinds of clay minerals. Non-clay minerals occupy more than 75 percent of the sluges weight, according to the XRD semi-quantification measurement. Micas, kaolinites, chlorite, vermiculite, and smectites occur as minor constituents. The sludges from Jurassic granites contain more kaolinites and $14{\AA}$-types than those from the Cretaceous ones. The chemical analysis clearly shows the difference between the parent rocks and the sludges in chemical compositions. Much of colored components in the sludges was accumulated as the weathering products. Particle size analysis results show that the sludges can be categorized as silt loam in a sand-silt-clay triangular diagram. This result was for her confirmed by the hydraulic conductivity data. In South Korea, the sludges remained after crushed sand production are classified as an industrial waste because of their impermeability, and which is caused by their high silt and clay fractions.

• Journal of the Korean Society of Groundwater Environment
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1996

The objectives of this study are to investigate the groundwater and surface water contamination, to interpret the attenuation mechanism of contaminant transport, and to find the appropriate contamination indicator. at the two big landfill sites : Nanjido Landfill and Hwasung Landfill. Leachate from the Nanjido, th, Hwasung and the Kimpo waste disposal sites is characterized by high temperature (31.7-40.1$^{\circ}C$), high electric conductivity (14,650-32,800 ${\mu}$S/cm), somewhat higher pH(7.58-8.45) and low Eh (-119.4-20.4 mV), and is enriched in both major (Na$^{＋}$, K$^{＋}$, Ca$^{2＋}$, Mg$^{2＋}$, HC $O_3$$^{－}$, Cl$^{－}$) and minor (Mn, Sr$^{2＋}$, Ba$^{2＋}$, Li$^{＋}$, F$^{－}$, Br$^{－}$) ions. Municipal solid waste leachate and industrial waste leachate are effectively discriminated by the content of S $O_4$$^{2－}$, Fe, and heavy metals. The attenuation mechanism of each component was assessed using the chemical analysis. Cl-normalizing process, WATEQ4F simulation, and preceding flownet analysis. Based on the calculation of Contamination Factor, K, Na, Ca, Mg, B, Zn, HC $O_3$, Cl, F, Br and TOC are effective contamination indicators in the Nanjido landfill site, and K, Na, Ca, Mg, B, S $O_4$, HC $O_3$, Cl, F, Br and TOC in the Habsburg landfill site Particularly, TOC is the best contamination indicator in landfill sites influenced by sea water.

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.8-16
• /
• 1996

The ${\alpha}-amylase$ of Alternaria alternata was purified through ammonium sulfate precipitation, dialysis and Sephadex G-100 column chromatography. One single band was obtained in SDS-polyacrylamide gel electrophoresis. The optimum pH for enzyme activity was 5.0 and the enzyme activity was maintained at $3.6{\sim}7.0$pH range. The optimum temperature for ${\alpha}-amylase$ activity was $40^{\circ}C$ and 71% of the activity was still maintained until 30 min after heating at $80^{\circ}C$. The ${\alpha}-amylase$ was slightly activated by $Mn^{2+},\;Zn^{2+}\;and\;Sn^{2+}$, but inhibited by $Ba^{2+},\;Pb^{2+},\;Co^{2+}\;and\;Ag^{1+}$. The $Hg^{2+}\;and\;Ag^{2+}$ slightly inhibited the activity of the enzyme at concentrations of $10^{-3}\;and\;10^{-4}M$. The Michaelis constant $(K_m)$ to soluble starch was $6.50{\times}10^{-2}M$ and inhibition constant $(K_i)$ by the 1mM EDTA was $8.0{\times}10^{-2}M$. The inhibition of this enzyme by EDTA was competitive one.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.30-37
• /
• 2017

This study was conducted to determine the effects of various growth substrates on the growth and flowering of hydroponically grown Freesia hybrid 'Gold Rich'. Perlite, peat moss and a perlite: peat moss mixture (1 : 1 ratio, v / v) were used as the growing media. The greatest plant height before flower bud differentiation was attained using mixed medium compared to the others. The type of medium used did not influence leaf number, mineral content or SPAD value in leaves. Flowering began at 137 days after planting in mixed medium, which was 13 days earlier than in perlite medium. The whole plant fresh weight was 21.3 g heavier in mixed medium than in perlite medium (40.9 g). A similar result was obtained for shoot length, with the highest value (96.6 cm) obtained in mixed medium, i.e., 20 cm higher than in perlite medium (76.6 cm). Floret number per plant was also the highest in mixed medium (14.4), i.e., 1.7 - times higher than in perlite medium. Therefore, among the substrates tested in this experiment, we recommend using mixed perlite: peat moss medium (1 : 1 ratio, v / v) for hydroponic culture of freesia, as the use of this medium improved the physical properties of the plants, producing the best results in terms of plant growth and cut-flower quality.

• Bulletin of the Korean Space Science Society
• /
• 2007.10a
• /
• pp.139-143
• /
• 2007

Electric propulsion has become a cost effective and sound engineering solution for many space applications. The success of SMART-1 and MUSES-C developed by European Space Agency (ESA) and Japan Aerospace Exploration Agency (JAXA) each proved that even small spacecraft could accomplish planetary mission with electric propulsion systems. A small electric propulsion system which is Hall effect thruster like SMART-1 is under development by SaTReC and GDPL (Glow Discharge Plasma Lab.) in KAIST for the next microsatellite, STSAT-3. To achieve optimized propulsion system, it is very necessary to understand plasma motions of Hall effect thruster. In this paper, we try to approach comprehensive plasma model with the particle simulation complementary to Particle In Cell (PIC) simulation. We think these two different approaches will help experimenters to optimize Hall effect thruster performances.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1360-1364
• /
• 2010

도시유역 물순환 해석 모형(Catchment hydrologic cycle Analysis Tool, CAT)은 기존의 개념적 매개변수 기반의 집중형 수문모형과 물리적 매개변수 기반의 분포형 수문모형의 장점을 최대한 집약하여, 도시유역 개발 전/후의 장/단기적 물순환 변화특성을 정량적으로 평가하고 물순환 개선시설의 효과적인 설계를 지원하기 위한 물순환 해석 모형이다. 이 모형은 수문학적으로 균일하게 판단되는 범위를 소유역으로 분할하여 지형학적 요인에 의한 유출 특성을 객관적으로 반영할 수 있으며, 개발 공간 단위별로 침투, 증발, 지하수 흐름 등의 모의가 가능하도록 하는 링크-노드 방식으로 개발되었다. 모형의 UI(User Interface)는 사용자가 손쉽게 모형을 적용/관리하고, 여러 시나리오를 동시에 효과적으로 모의하여 분석할 수 있도록 설계되었다. 또한, 모든 입/출력 자료를 엑셀이나 텍스트 형식과 연동되도록 하여 프로젝트별 매개변수 관리가 용이하도록 개발하였다. 특히 본 모형에서는 사용자의 목적에 맞는 다양한 물순환 개선시설(침투시설, 저류지, 습지, 빗물저장시설, 리사이클 및 외부급수 등)의 구현 및 모의가 가능하도록 개발하였다. 여기서, 물순환 개선시설이란 빗물을 흡수하고 저류할 수 있는 도시녹지시설 혹은 구조물로서 도심 내의 불투수면을 저감시키고 유출수를 줄이면서 동시에 녹지를 확보하여 효과적인 물순환 기능에 영향을 미치는 시설들이다. 이러한 물순환 개선시설은 신도시 및 지역 혁신도시 개발 등의 대규모 토지이용변화가 예상되는 개발지역에 대한 평가 및 개선 기술을 제공하여 물순환 건전화를 위한 설계에 직접적으로 활용될 수 있는 큰 장점을 지니고 있다. 먼저 침투 시설은 계획침투량을 반영하며 토양으로의 침투량과 지하수로의 이동을 모의한다. 저류시설은 하도 내에 위치한 online 저류지와 하도 외에 위치한 offline 저류지로 구분하고 저류지 수면의 증발량과 취수량을 고려하며, 방류구를 통한 방류량을 반영하였다. offline 저류지의 경우는 하도 내의 흐름의 규모에 따라서 일정량을 넘는 경우만 offline 저류지로 유입될 수 있는 양을 산정하도록 하였으며 하류 하천으로의 방류를 반영하여 홍수 후에 저류지가 비워지도록 하였다. 유역 내의 습지는 식생과 수면에서의 증발산을 반영하였다. 습지의 저류능력을 넘는 양은 월류되어 하류로 유출되며, 방류구를 통한 방류량을 반영하였다. 빗물저장시설의 경우는 초기우수와 같은 일정량 이하의 유입량과 시설용량을 초과하는 양은 방류하도록 하였고, 물 사용량을 반영하였다. 또한, 본 모형에서는 하천 내에서 취수하여 유역으로 공급할 수 있도록 리사이클 처리노드를 계획하였다. 리사이클은 용수 이용 목적에 따라 필요지역으로 공급되는 것으로 하였으며, 하천유지용수의 목적으로 취수되어 상류 혹은 하류의 임의 지역으로 공급되는 것을 포함하였다. 또한, 유역외부에 광역으로 급수되는 공급량도 반영하도록 하였다.

• Journal of Korea Water Resources Association
• /
• v.39 no.3 s.164
• /
• pp.227-240
• /
• 2006

In the several decades, various storage facilities have been developed and operated to supply water resource, flood control or environmental preservation etc. Then, how those man-maid storage facilities affect on the downstream water and environment and how the hydrologists can evaluate those features for water resources problem-solving are high-concentrated problems in this field. Most large watersheds in Korea contain various types of artificial facilities such dams, reservoirs, in-land ponds, wetlands etc. But the study to develop the technology for achieving the effect of the variances and properties of the long term streamflow caused by the artificial storage facilities have been on the simple watershed models and experimental modeling in the real fields. In this paper, we introduce the procedure and methods to consider the above problems based on continuous and semi-distributed featured SWAT model. At the first, we describe the elements and mechanisms of storage facilities in SWAT model to see how we can apply that in proper and appropriate manner for real field problems. Then, we applied the process to a sample watershed, Taewha River basin which covers the most of Ulsan region. Specially, we concentrate on our effort to the effect of upper reservoirs on down stream long term flows based on various scenario basis. The result was described and analysed in spacial and temporal variations on that basin using the precise manner.