• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.361-368
• /
• 2010

This paper presents high speed position controller using stepping motor. The proposed position controller has close loop and open loop mode. In the high speed region, torque angle which is controlled by PI controller and memory based look-up table, is used to keep the reference position. The memory based look-up table produces a torque angle according to motor speed, and the PI controller can compensate the torque angle error. So, the fast dynamic response can be expected in the same position error. The open loop control mode which is divided by 3-modes control the actual position in the low speed and small position error. Each open loop modes are designed to reduce position error and dynamic brake in the stop command. The proposed position control scheme is verified by the practical stepping motor.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.120-130
• /
• 1999

In this paper, we show that the instantaneous phase current of the bifiler-wound hybrid stepping motor is dependent of lead angle and that the information of motor position is obtained from the instantaneous phase current at ${\pi}/2$ by the theoretical formular and its computer simulation results. From the facts, we design the microcontroller-based motor position sensorless controller of optimal lead angle, which generates the excitation pulses for the closed-loop drives. The controller is consist of microcontroller which has the function of A/D converter, programmable input/output timer, and the transfer table which has the values of optimal lead angle depending on motor velocity, and ROM which has the transfer table of the values of lead angle depending on velocity of motor and the values of instantaneous phase current at ${\pi}/2$. From the design of microcontroller-based controller, we minimize the external interface circuit and obtain flexibility by changing the contents of ROM transfer tables and the control software. We confirm that the designed controller drives the bifilar-wound hybrid stepping motor is the mode of optimal lead angle by comparing the instananeous phase current experimental results and computer simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.421-427
• /
• 2005

A closed-loop sensorless stroke control system for a linear compressor has been designed. The motor parameters are identified as a function of the piston position and the motor current. They are stored in ROM table and used later for the accurate estimation of piston position. Also it was attempted to approximate the identified motor parameters to the 2nd-order surface functions. Some experimental results are given in order to show the feasibility of the proposed control schemes for linear compressors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.466-469
• /
• 1995

This paper presents a design and performance of the 6 D.O.F linear motion table with a magnetic bearing suspension. The linear positioning of the table with a 150mm stroke is driven by a brushless DC Linear motor and the other attitudes of the stage are controlled by the analog PD controller with magnetic bearing actuators. Each magnetic bearing unit which consists of 3 electromagnets, 3 capacitance probes and 3 backup bearings affords controlled forces by detecting the air gap between the probes and guideways. An integral type capacitance probe amplifier is equipped on the upper plate of the table so that the probe line to the probe amplifier can be shorter therefore the problems due to the stray capacitance and noise can be reduced. Form the pitch-yaw errormeasured by the autocollimator, the vertical and horizont straightness errors of the table are derived that they are maintained below 1.mu. m over 100mm stroke. The positioning accuracy of the linear motion is maintained below 2 .mu. m and the repeatability error is below 1 .mu. m

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.77-82
• /
• 2010

In this paper, a haptic fishing robot, Fishbot, for a Virtual Fishing System is presented. Fishbot is 3DOF robot and it consists of a XY table and a wheel motor. To simulate the motion of fish, XY table is controlled by position servo drivers with variable torque constraint, and wheel axis is controlled by torque servo driver. Finally, Fishibot detects the end point of fishing pole with cameras to recognize the pose of user, and it can interface with a Virtual Reality System.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.813-816
• /
• 1999

In this paper is Proposed a VSC(variable structure controller) for a high-speed and high-precision position control of a XY Table, which is based on the PI type reaching mode. Also the comparative study between the proposed method and the conventional PID controller is presented as well. Designed and tuned under repeated experiments, the proposed method showed a better reasonable performance than PID controller in the aspect of tracking error.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.828_829
• /
• 2009

본 논문에서는 가변속 펌프 시스템에 적합한 SRM의 최적 구동을 위한 예측 방법에 대해 나타내었다. 회전자의 위치에 따른 쇄교 자속 곡선 모델링을 통하여 제안된 방법에 의해 전류의 최적 인가 시점을 테이블로 구성하였으며, 이를 기반으로 SRM 제어기 및 알고리즘을 Matlab/Simulink를 이용하여 시뮬레이션을 통해 결과값을 나타내었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.12
• /
• pp.1313-1320
• /
• 2013

An ultraprecision multi-axis machine tool has been designed and developed in our laboratory. The machine tool has four moving axes which are composed of three linear axes and one rotational axis. It has a gantry type structure and the Z-axis is on the X-axis and the C-axis, on which a workpiece is located, is inside the Y-axis. This paper shows control performance improving method and procedure for the ultra-precision positioning control of a hydrostatic bearing guided linear axis. Through improvements of electrical and mechanical components for the control system such as control electronics and oil pumping systems, the control disturbing noise is decreased. Also by the frequency domain analysis of control system those problem-making system components are identified and modified with analytical methods. The controller is analyzed and designed from frequency domain data and system information. In the experimental control results the nanometer order control result is successfully presented.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.100-102
• /
• 2002

네트워크 기술의 급속한 발달로 인해 최근 무선 Ad-hoc 통신망에 관한 연구가 활발하게 진행되어 오고 있다. Ad-hoc망은 기존의 유선망에서와는 다르게 중앙 집중화된 관리를 필요로 하지 않고 지리적으로 분산된 각 노드들이 역동적으로 위치를 변경하며 라우터의 역할을 수행하여 단대단 정보전송 서비스를 제공한다. 그러나 제한된 통신 자원으로 인한 낮은 대역폭과 높은 전송 오류를 포함하고 있으며, 한정된 대역과 단말기능에 있어서의 제약으로 현재의 인터넷 라우팅 프로토콜들을 그대로 사용하기 어렵다. 현재 사용되고 있는Ad-hoc 네트워크에서의 라우팅 프로토콜은 네트워크 토폴로지가 변화해야만 새로운 경로를설정하도록 되어 있어 이동성이 낮은 환경에서의 트래픽 집중화 현상과 경로 설정을 위한 반복적 검색으로 서비스 효율이 떨어지는 문제점을 가지고 있다. 따라서 본 논문에서는 다중 이웃 노드 테이블을 별도 관리하고 혼잡 상황시 자노드 중계 차단을 수행하여 효율적으로 부하균등을 제어하는 라우팅 기법을 제시한다.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.10-12
• /
• 2019

영구자석 동기 전동기는 높은 효율과 전력 밀도 등의 장점때문에 자동차나 엘리베이터 등 다양한 산업 분야에서 사용되고 있다. 영구자석 동기 전동기의 구동에는 여러가지 이유로 인해 고조파 토크 리플이 존재한다. 이러한 토크 리플은 속도 리플을 유발하여 소음이나 진동의 원인이 되며, 그 분포가 전동기의 구조나 운전점에 따라 변화하기 때문에 제어 성능에 매우 큰 영향을 준다. 본 연구에서는 영구자석 동기 전동기의 운전점에 따라 변화하는 토크 리플을 상쇄하기 위해 주입할 최적의 고조파 토크를 실시간으로 추적하는 방법을 제안한다. 제안된 방법에서는 속도 제어 중 토크 리플에 의해 발생하는 속도 리플을 적분하여 평가지표로 삼고, 속도 리플이 감소하는 방향으로 주입할 고조파 토크의 크기와 위상을 조정한다. 이 방법은 제정수 추출이나 회전자의 위치 별 토크 테이블 없이 운전 조건의 변화에 따라 토크 리플의 최적 보상점을 추적한다는 장점이 있다. 제안된 방법의 효과는 시뮬레이션을 통해 검증되었다.