• Title/Summary/Keyword: 테스트 도구

Search Result 393, Processing Time 0.047 seconds

am vulnerability assessment based on a climate stress test (기후 스트레스 테스트 기반 댐 취약성 평가)

  • Kim, Tae Hyeong;Kang, Boo Sik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.415-415
    • /
    • 2022
  • IPCC 제5차 보고서('14) 및 세계위험보고서('15) 등에서 기후변화에 대한 과학적 근거를 제시하였으며, 상위 위험요소로 '수자원 위기'를 꼽았다. 전 세계적으로 기후변화로 인한 이상 기상현상이 발생하고 있으며, 국내에서도 최근 기후변화에 따른 수문사상의 변화로 극한홍수 및 극한가뭄 등으로 인한 피해가 지속적으로 발생하고 있다. 물 관리에서 기후변화는 가장 큰 리스크 요인이므로 물관리 계획 수립 과정에서 기후변화 영향을 고려한 대책을 수립할 필요가 있다. 기후변화에 대한 댐 취약성 평가 관련 연구가 이루어지고 있으나, 미래 기후변화의 불확실성을 충분히 고려했다고 보기 어렵기 때문에 현업에서 의사결정 도구로 활용하기에는 한계가 있다고 볼 수 있다. 이에 따라 과거 수문자료 및 특정 기후모델에 의존하지 않고 댐 인프라의 취약성을 평가할 수 있는 새로운 방법론이 필요하다고 판단된다. 따라서 본 연구를 통해 기후변화의 불확실성에 대비한 댐 취약성 평가 방법론을 정립하고자 한다. 본 연구에서는 기존에 진행된 IPCC 기후변화 시나리오에 따른 댐 취약성 평가 연구사례 및 한반도의 기후변화 영향 및 수문변화를 조사하였다. 그리고 기후 스트레스 시나리오 기반 취약성 평가 체계 및 방법론을 정립한 뒤, 월 강우량을 4분위로 나누어 각 분위별 강우량과 기온을 변경하여 기후 스트레스 시나리오를 생성하였다. 생성된 기후 스트레스 시나리오와 IPCC 기후변화 시나리오 기반 취약성 평가를 유출 및 저수지 모형을 결합하여 충주댐, 용담댐, 합천댐, 섬진강댐에 실시하였다. 그 결과 기후 스트레스에 따른 유출 취약성 평가는 20분위 수 갈수량을 이용해 연중 보장확률을 나타내는 것이 효율적이며, 온도의 영향보다는 강우의 변동이 댐 이수안전도 취약성 평가에 더 큰 영향을 주는 것을 확인할 수 있었다.

  • PDF

The Alignment Evaluation for Patient Positioning System(PPS) of Gamma Knife PerfexionTM (감마나이프 퍼펙션의 자동환자이송장치에 대한 정렬됨 평가)

  • Jin, Seong Jin;Kim, Gyeong Rip;Hur, Beong Ik
    • Journal of the Korean Society of Radiology
    • /
    • v.14 no.3
    • /
    • pp.203-209
    • /
    • 2020
  • The purpose of this study is to assess the mechanical stability and alignment of the patient positioning system (PPS) of Leksell Gamma Knife Perfexion(LGK PFX). The alignment of the PPS of the LGK PFX was evaluated through measurements of the deviation of the coincidence of the Radiological Focus Point(RFP) and the PPS Calibration Center Point(CCP) applying different weights on the couch(0, 50, 60, 70, 80, and 90 kg). In measurements, a service diode test tool with three diode detectors being used biannually at the time of the routine preventive maintenance was used. The test conducted with varying weights on the PPS using the service diode test tool measured the radial deviations for all three collimators 4, 8, and 16 mm and also for three different positions of the PPS. In order to evaluate the alignment of the PPS, the radial deviations of the correspondence of the radiation focus and the LGK calibration center point of multiple beams were averaged using the calibrated service diode test tool at three university hospitals in Busan and Gyeongnam. Looking at the center diode for all collimators 4, 8, and 16 mm without weight on the PPS, and examining the short and long diodes for the 4 mm collimator, the means of the validation difference, i.e., the radial deviation for the setting of 4, 8, and 16 mm collimators for the center diode were respectively measured to 0.058 ± 0.023, 0.079 ± 0.023, and 0.097 ± 0.049 mm, and when the 4 mm collimator was applied to the center diode, the short diode, and the long diode, the average of the radial deviation was respectively 0.058 ± 0.023, 0.078 ± 0.01 and 0.070 ± 0.023 mm. The average of the radial deviations when irradiating 8 and 16 mm collimators on short and long diodes without weight are measured to 0.07 ± 0.003(8 mm sd), 0.153 ± 0.002 mm(16 mm sd) and 0.031 ± 0.014(8 mm ld), 0.175 ± 0.01 mm(16 mm ld) respectively. When various weights of 50 to 90 kg are placed on the PPS, the average of radial deviation when irradiated to the center diode for 4, 8, and 16 mm is 0.061 ± 0.041 to 0.075 ± 0.015, 0.023 ± 0.004 to 0.034 ± 0.003, and 0.158 ± 0.08 to 0.17 ± 0.043 mm, respectively. In addition, in the same situation, when the short diode for 4, 8, and 16 mm was irradiated, the averages of radial deviations were 0.063 ± 0.024 to 0.07 ± 0.017, 0.037 ± 0.006 to 0.059 ± 0.001, and 0.154 ± 0.03 to 0.165 ± 0.07 mm, respectively. In addition, when irradiated on long diode for 4, 8, and 16 mm, the averages of radial deviations were measured to be 0.102 ± 0.029 to 0.124 ± 0.036, 0.035 ± 0.004 to 0.054 ± 0.02, and 0.183 ± 0.092 to 0.202 ± 0.012 mm, respectively. It was confirmed that all the verification results performed were in accordance with the manufacturer's allowable deviation criteria. It was found that weight dependence was negligible as a result of measuring the alignment according to various weights placed on the PPS that mimics the actual treatment environment. In particular, no further adjustment or recalibration of the PPS was required during the verification. It has been confirmed that the verification test of the PPS according to various weights is suitable for normal Quality Assurance of LGK PFX.

Effect of forming groups according to the brain hemisphere preference on the cooperative problem solving learning achievement in the middle school technology (중학교 기술 교과의 협동적 문제해결학습에서 좌우뇌 선호도에 따른 소집단 구성이 학업성취도에 미치는 영향)

  • Park, Heon-Mi
    • 대한공업교육학회지
    • /
    • v.34 no.2
    • /
    • pp.205-229
    • /
    • 2009
  • The purpose of this study is to verify the effect of forming groups according to the brain hemisphere preference on the cooperative problem solving learning achievement in the middle school technology. The subjects of this study were 95 second grade boy students of a middle school in Daejeon and the measurement instrument of the left and right hemisphere preference is the Brain preference Indicator(BPI) which had been developed by Torrance et al(1977) and was adjusted by Ko, Younghee(1991). The academic achievement was analyzed on cognitive, psychomotor and affective domains. Derived results from this research are stated below: First, making groups according that the brain preference is more similar was more effective than making groups according to the high familiarity and the similarity of performance in the academic achievement of psychomotor and affective domains. Second, making groups according that the brain preference is more similar was more effective than making groups according that the brain preference is more diffrent for the academic achievement of affective domains on the cooperative problem solving learning in technology. Third, the academic achievement score of the right hemisphere preference group is higher than the score of the population in three domains. Also, the academic achievement score of the right hemisphere preference group is higher than the score of the left hemisphere preference group.

Development of Information Technology Infrastructures through Construction of Big Data Platform for Road Driving Environment Analysis (도로 주행환경 분석을 위한 빅데이터 플랫폼 구축 정보기술 인프라 개발)

  • Jung, In-taek;Chong, Kyu-soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.3
    • /
    • pp.669-678
    • /
    • 2018
  • This study developed information technology infrastructures for building a driving environment analysis platform using various big data, such as vehicle sensing data, public data, etc. First, a small platform server with a parallel structure for big data distribution processing was developed with H/W technology. Next, programs for big data collection/storage, processing/analysis, and information visualization were developed with S/W technology. The collection S/W was developed as a collection interface using Kafka, Flume, and Sqoop. The storage S/W was developed to be divided into a Hadoop distributed file system and Cassandra DB according to the utilization of data. Processing S/W was developed for spatial unit matching and time interval interpolation/aggregation of the collected data by applying the grid index method. An analysis S/W was developed as an analytical tool based on the Zeppelin notebook for the application and evaluation of a development algorithm. Finally, Information Visualization S/W was developed as a Web GIS engine program for providing various driving environment information and visualization. As a result of the performance evaluation, the number of executors, the optimal memory capacity, and number of cores for the development server were derived, and the computation performance was superior to that of the other cloud computing.

Performance Enhancement Method Through Science DMZ Data Transfer Node Tuning Parameters (Science DMZ 데이터 전송 노드 튜닝 요소를 통한 성능 향상 방안)

  • Park, Jong Seon;Park, Jin Hyung;Kim, Seung Hae;Noh, Min Ki
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.7 no.2
    • /
    • pp.33-40
    • /
    • 2018
  • In an environment with a large network bandwidth, maximizing bandwidth utilization is an important issue to increase transmission efficiency. End-to-end transfer efficiency is significantly influenced by factors such as network, data transfer nodes, and intranet network security policies. Science DMZ is an innovative network architecture that maximizes transfer performance through optimal solution of these complex components. Among these, the data transfer node is a key factor that greatly affects the transfer performance depending on storage, network interface, operating system, and transfer application tool. However, tuning parameters constituting a data transfer node must be performed to provide high transfer efficiency. In this paper, we propose a method to enhance performance through tuning parameters of 100Gbps data transfer node. With experiment result, we confirmed that the transmission efficiency can be improved greatly in 100Gbps network environment through the tuning of Jumbo frame and CPU governor. The network performance test through Iperf showed improvement of 300% compared to the default state and NVMe SSD showed 140% performance improvement compared to hard disk.

A Study on the Development Environment for Flight Software using PowerPC (PowerPC를 이용한 저궤도 위성용 탑재소프트웨어 개발환경에 대한 연구)

  • 이재승;최종욱;김대영;이종인;김학정
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.10c
    • /
    • pp.514-516
    • /
    • 2004
  • 위성의 개발을 위해서는 오랜 개발기간과 많은 예산, 축적된 기술이 요구된다. 또한 위성에는 다양한 분야의 기술이 사용되어지기 때문에 각 서브시스템마다 독자적인 개발환경을 구축할 필요가 있다. 특히 위성의 찌어. 임무수행 및 지상과의 통신 등을 담당하는 탑재소프트웨어는 위성의 용도 및 목적에 따라 개발환경이 크게 달라진다. 실시간 운영체제는 무엇을 사용하는지, 개발 및 검증을 위한 도구로 어떤 프로그램을 사용하는지, 내외부의 인터페이스는 어떠한 방식으로 수행할지, 새로운 기능의 CPU나 하드웨어에 대한 제어 등 위성의 탑재소프트웨어를 개발하기 위해서는 많은 검토 항목들이 고려되어야 한다. 새로운 위성을 개발할 경우 신기술의 적용과 새로운 시스템위성시스템의 검증 및 개발을 위한 개발검증장비가 요if되며, 위성시스템의 변경 때마다 개발검증장비를 새로이 구축하게 되면 많은 기간과 막대한 비용이 위성개발 시마다 소요된다. 위성선진국에서는 다양한 위성의 개발 시 비용절감 및 개발기간 단축을 위하여 범용위성용 개발검증장비를 개발하여 이용하고 있는 추세이다. 국내에서는 다목적실용위성 1호가 발사되어 성공적으로 임무를 수행하고 있으며 다목 실용위성 2호가 개발되어 현재 통합 및 조립시험이 진행 중이다. 그러나 새로운 위성시스템의 사전 검증 및 신기술의 적용을 위한 범용위성 시스템 테스트베드에 대한 기술은 미비한 실정이다. 이러한 범용위성용 개발검증장비의 기반기술을 확보하기 위하며 현재 위성전자전산시스템 개발검증장비에 대한 연구가 수행되고 있다. 본 논문에서는 현재 수행되고 있는 PowerPC를 이용한 위성 탑재소프트웨어 개발검증시스템의 설계 및 개발현황에 대하여 소개한다.이스는 실험정보가 저장된 데이터베이스, 분석결과가 저장된 데이터베이스, 그리고 유전자 정보 탐색을 위한 데이터베이스로 분류해 데이터를 효율적으로 관리할 수 있게 하였다. 본 시스템은 LiNUX를 운영체계로 하고 데이터베이스는 MYSQL로 하여 JSP, Perl. 통계처리 언어인 R로 구현되었다.프트웨어를 사용하지 않고도 국내의 순수 솔루션인 리눅스 기반의 LonWare 3.0 다중 바인딩 기능을 통해 저 비용으로 홈 네트워크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에

  • PDF

A Study on the Factors of the Hardware Cost Estimation for Service Robot Development (서비스 로봇 개발의 하드웨어 비용추정을 위한 항목 도출에 관한 연구)

  • Lee, Jungsoo;Sohn, Dongseop;Choi, Yeon-Seo;Park, Myeongjun;Min, Jeongtack
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.5
    • /
    • pp.35-44
    • /
    • 2018
  • The purpose of this study was to derive the factors that affect the development cost and the priority/weight of effectiveness in the pre-development stage of a service robot to estimate the development cost. In particular, the functions of service robots vary according to the field of application, and their prices are not only different but most of them are small-scale production; hence, a cost estimation is necessary. In this research, the factors affecting the service robot development cost in the process of service robot development and adding functions are classified as a functional factor while the factors that affect the entire development cost due to environmental causes, in which the service robot is operated or in the development process, are classified as an adjustment factor. The FGI was conducted to derive the factors and a Delphi survey was conducted among 84 domestic experts to determine the weights of the factors. As a result of the analysis, six functional factors (41 detailed criteria) and five adjustment factors (17 criteria) were derived, the cost weight and rank of the factors were suggested. This study suggests that the development cost of the service robot can be used as a decision-making strategy to select the operation functions in the development process, and can be utilized as an essential tool for the service robot development.

A Study on Conformance Testing Method to Verify the BioAPI Based System Module (BioAPl기반 시스템 모듈을 검증하기 위한 적합성시험 방법 연구)

  • Lee Yoo-Young;Kwon Young-Bin
    • The KIPS Transactions:PartB
    • /
    • v.11B no.7 s.96
    • /
    • pp.759-768
    • /
    • 2004
  • Recently the biometric recognition technology is intensively studied and the standardization of the technology has been highly demanded for its commercialization. Currently many blometric recognition products are being developed based on the BioAPl(Biometric Application Program-ming Interface) specification. However, the reliable testing tools (or scenarios) to evaluate performance and conformance of the products are not shown yet. In this paper, a conformance testing method is presented, which verifies a biometric recognition system to meet the requirements of the BioAPl standard. Two different testing procedures are used in the proposed method. The first procedure evaluates that each functions offered in the BioAPl specification are correctly implemented and that the functions are actually used in the system. Through the Procedure, a BSP(Biometric Service Provider) system is executed on the framework of the BioAPl functions. It requires selection of parameters and prece-dent functions that should be executed first. The second procedure evaluates the abilities of module management, handling operations and ver-ification process by the analysis of the test cases. It tests the correctness of the system operation when a testing scenario is given. The proposed testing method is applied on a fingerprint verification BSP using the sample BSP provided by the BioAPl consortium. The experimental results shows the benefits of the proposed testing method.

Development and Application of the e-learning courseware about the Earth Science I (based on the Earth Environmental Change) (지구과학 I의 e-learning 교수·학습자료 개발 및 적용 - 지구환경변화 단원을 중심으로 -)

  • Kim, Yun-Jeong;Lim, Seong-Kyu
    • Journal of Science Education
    • /
    • v.32 no.2
    • /
    • pp.17-32
    • /
    • 2008
  • The purpose of this study was to analyze the use of the e-learning courseware which is about the properties of earth environmental change. I made these materials using Lectora program, and to have more visual effect, I used movies and animations as much as possible. A lot of movies and pictures are added to help student understand the geographical age. Especially the forms of performance test questions are various, and student can check the answer right after taking test. Because of this, they can get a immediate feedback. In addition, this allows you to adapt yourself to the age of information by using the internet. Every plug-in is already linked together, so you only need to once. Pictures and moving reflections can be edited with ease. I hope this study will provide valuable aid for the education of earth science and a chance to develop better materials.

  • PDF

A Scheme of Distributed Network Security Management against DDoS Attacks (DDoS 공격에 대응하는 분산 네트워크 보안관리 기법)

  • Kim Sung-Ki;Yoo Seung-Hwan;Kim Moon-Chan;Min Byoung-Joon
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.7 s.349
    • /
    • pp.72-83
    • /
    • 2006
  • It is not a practical solution that the DDoS attacks or worm propagations are protected and responded within a domain itself because it clogs access of legitimate users to share communication lines beyond the boundary a domain. Especially, the DDoS attacks with spoofed source address or with bogus packets that the destination addresses are changed randomly but has the valid source address does not allow us to identify access of legitimate users. We propose a scheme of distributed network security management to protect access of legitimate users from the DDoS attacks exploiting randomly spoofed source IP addresses and sending the bogus packets. We assume that Internet is divided into multiple domains and there exists one or more domain security manager in each domain, which is responsible for identifying hosts within the domain. The domain security manager forwards information regarding identified suspicious attack flows to neighboring managers and then verifies the attack upon receiving return messages from the neighboring managers. Through the experiment on a test-bed, the proposed scheme was verified to be able to maintain high detection accuracy and to enhance the. normal packet survival rate.