• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.12-18
• /
• 2006

풍력터빈 풍동시험의 경우 모델 축소에 의한 레이놀즈 수 감소가 풍력터빈 성능에 미치는 영향이 적절히 고려되어야 한다. 본 연구를 통해 수치해석과 축소모델 풍동시험을 통해 모델 축소효과를 파악하여 이를 적절히 보상하는 기법을 개발하고자 한다. 이를 위해 풍력터빈 형상 및 실물모델 시험데이터가 공개되어 있는 NREL Phase VI 모델을 표준모델로 선정하여 수치해석 및 풍동시험을 수행하였다. 풍동시험은 KARI LSWT에서 2006. 10에 수행되었으며, 블레이드 끝단 속도를 실물 모델과 일치시켰으며 시험부 유속은 0$\sim$25m/s, 블레이드 설치각은 3도 조건을 기준조건으로 사용하였다. 축소모델 시험결과 최대토크는 약 10% 정도 감소현상을 보이고 있다.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.954-958
• /
• 2003

새로운 에너지원인 풍력 발전에 대한 연구가 세계적으로 활발히 진행되고 있는 가운데 본 논문에서는 풍력 발전의 핵심 부분인 풍력 터빈에 관한 모의실험을 다루고자 한다. 실제 기상조건과 유사한 바람데이터를 실시간으로 생성, 이를 이용하여 풍력터빈 시뮬레이터용 DC motor의 토크제어 시스뎀을 설계 구현하였다. 본 연구는 기존의 단순 토크제어 시스템과는 달리 실시간으로 생성되는 데이터를 이용하여 보다 실제 풍력발전에 가까운 모의실험을 가능하게 한다. M/G Set를 기반으로한 DC motor 토크 제어 시스템은 바람데이터의 변화에 따른 풍력터빈의 토크와 발전단의 부하의 상관관계를 명확히 하는데 크게 이바지 할 것이며 더 나아가 발전기로의 정확한 토크 전달로써 계통 연계 연구에 많은 기여를 하고자 한다.

• Explosives and Blasting
• /
• v.34 no.1
• /
• pp.19-28
• /
• 2016

The number of industrial structures that must be demolished due to functional and structural deterioration has been increased. There is an increasing application of explosive demolition or explosive demolition combined with mechanical demolition to minimize temporal and spatial environmental hazardous factors created during the process of demolition. In this case study, to demolish the turbine foundation structure, which is a large-section reinforced concrete structure, the parital explosive demolition thchnique was conducted. As a result of the partial explosive demolition, the overall crushing of the blasting sections of beam-column joints structure with haunched beams and second-floor columns about the turbine foundation was satifactory, and the explosive demolition was completed without causing any damage to surrounding facilities.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.69-76
• /
• 1998

This paper presents a novel algorithm for determining the optimal operation of a cogeneration plant with back-pressure and extraction-condensing turbine/generators. The proposed algorithm determines the optimum load of boilers and turbine/generators, using only one parameter, the steam mass flow rate, which can be obtained directly from on-line measurement during plant operation. The proposed algorithm consists of the non -linear operating cost function, and its correlated constraints. Furthermore, it has been successfully applied to an actual industrial cogeneration plant, with satisfactory results. Comparison of these results with actual operating data has revealed that using the proposed algorithm results in at least 1.2~4.5[%] operating cost saving, depending on the process steam load. Furthermore the proposed algorithm can be easily installed in a process control computer because the required input data can be easily obtained from information available on-line.n-line.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.9-17
• /
• 2019

Variable guide vanes(VGVs) that consist of link mechanisms and an actuator system are required for an aircraft gas turbine engine to adjust the incidence angle of stator vanes. In this study, we developed a VGV actuator system for three-stage VGVs with two hydraulic actuators. The requirements for the actuator system were derived by analyzing the link mechanisms and air loads, and a hydraulic power-pack was developed based on these requirements. Through a load test using the actuator test-rig and the application of synchronizing control logic with proper control gains, the actuator system could be developed and verified.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.279-286
• /
• 2021

In this study, we investigated the behavior characteristics of the L-type flange bolt connection, which is used to connect upper and lower flanges having L-type ring sections, by bolts. This connection is mainly used in domestic wind turbine structures, wherein it is a vital component as any imperfection could cause the collapse of the entire structural system. Therefore, understanding the behavior characteristics of the L-type flange bolt connection is imperative. In this study, the connection's response to external force was simulated using finite element (FE) analysis and the FE model was idealized to behave as a single L-type bolt flange. The variation in the bolt tension and the L-type flange stress were analyzed to understand the behavior characteristics of the connection. Moreover, the bolt-load function models proposed by Petersen, Schmidt/Neuper and VDI 2230, theoretically expressing a relation between bolt tension and external force, were compared to evaluate the suitability of the FE analysis and analyze the significant behavior characteristics of the connection. Furthermore, the changes in the bolt-load curve due to the variations in the partial dimensions of the L-type flange bolt connection were analyzed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.1
• /
• pp.38-46
• /
• 2022

One of the main goal of gas turbine rim seal research is to prevent thermal damage at rotor-stator disk by preventing hot gas of main flow in turbine passage. To increase sealing performance, several studies related to the improvement of rim seal configuration have been conducted. In addition, research based on actual operating condition is needed in order to apply effective turbine rim seal configuration. In this study, numerical simulation was conducted with variation of rotor rim seal thickness. Radial and axial expansion cases were tested numerically in this study. As a result, the cases showed different pressure distribution, sealing performance and flow characteristics according to the amount of secondary flow.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.232-233
• /
• 2011

본 연구는 최근에 각광받고 있는 풍력터빈 발전기의 동적특성에 관한 시뮬레이션을 수행한다. 풍력터빈이 기존의 전력계통에 연계되면 전력계통에 미치는 영향은 동기발전기만으로 구성된 전력계통과는 다르며 특히 동적특성이 달라진다. 본 논문에서는 PSS/E를 이용하여 GE1.5MW의 풍력터빈에 대한 동적특성을 시뮬레이션 한다. 풍속의 변화, 부하의 변화 그리고 무한대 모선의 전압변화를 통하여 GE1.5MW의 풍력터빈의 특성을 검토하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.60.1-60.1
• /
• 2011

본 연구에서는 풍력 터빈 블레이드의 다분야 통합 최적 설계를 위하여, 진동하는 비정상 공력하중에 의한 작동 수명을 고려한 최적화 과정을 수행하였다. 최적화 대상으로는 NREL의 1.5MW 급 풍력터빈을 baseline 으로 하였고, NREL의 FAST 프로그램을 이용하여 발전기의 정격 출력 및 블레이드에 작용하는 비정상 공력 하중 특성을 분석하였다. 최적화 수행 시 블레이드 형상의 효율적인 구현을 위해 형상모델링 함수를 이용하여 코드 길이와 트위스트 분포를 모델링하였다. 그리고 상용 MDO Framework 인 Piano를 이용하여 블레이드 루트부의 비정상 공력하중 조건을 완화시키는 최적화 설계를 수행하였다. 정격출력을 유지하면서도 Out of Plain 방향의 하중 조건을 개선하여 보다 긴 작동 수명을 기대할 수 있는 블레이드 형상을 설계하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.110-114
• /
• 1995

This paper is dealing with speed control of Darrieus Wind Turbine, which can be figured out from torque equation. The operating point of Darrieus Wind Turbine can be found from speed-torque curve, which is either stable or instable. The transfer of operating point due to variation of wind speed and generating power is shown in this paper.