• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.359-369
• /
• 2021

In underwater communications, to compensate performance degradation induced from rapidly changing channel transfer characteristic, multi-band communication method which allocate the same data to different frequency bands is used. However, the multi-band configuration may have worse performance than the single-band one because performance degradation in a particular band affects the output from the entire bands. This problem can be solved through a receiving end that analyzes error rates of each band, sets threshold values and allocates lower weights to inferior bands. Therefore, this paper proposed a weighting algorithm based on estimated Bit Error Rate (BER) which analyzes reliability of received data based on the performance difference between demodulated and decoded data. Employing turbo codes with coding rate of 1/3, we evaluate the performance of the proposed weighted multi-band transmission model in real underwater environments based on optimal simulation parameters. Through the sea trial experiment, we confirmed error performance was improved by applying the proposed weighting algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.63-70
• /
• 2016

To increase throughput efficiency and improve performance, FTN(Faster Than Nyquist) method and LDPC(Low Density Parity Code) codes are employed in DVB-S3 system. In this paper, we proposed efficient turbo equalization model to minimize inter symbol interference induced by FTN transmission. This paper introduces two conventional scheme employing SIC(Successive Interference Cancellation) and BCJR equalizer. Then, we proposed new scheme to resolve problems in this two conventional scheme. To make performance improved in turbo equalization model, the outputs of LDPC and BCJR equalizer are iteratively exchange probabilistic information. In fed LDPC outputs as extrinsic informa tion of BCJR equalizer. we split LDPC output to separate bit probabilities. We compare performance of proposed scheme to that of conventional methods through using simulation in AWGN(Additive White Gaussian Noise) channel. We confirmed that performance was improved compared to conventional methods as increasing throughput parameters of FTN.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.293-297
• /
• 2015

Underwater acoustic communications has been limited use for military purposes in the past. However, the fields of underwater applications expend to detection, submarine and communication in recent. The excessive multipath encountered in underwater acoustic communication channel is creating inter symbol interference, which is limiting factor to achieve a high data rate and bit error rate performance. To improve the performance of a received signal in underwater communication, many researchers have been studied for channel coding scheme with excellent performance at low SNR. In this paper, we applied BCJR decoder based ( 2,1,7 ) convolution codes and to compensate for the distorted data induced by the multipath, we applying the turbo equalization method. Through the underwater experiment on the Gyeungcheun lake located in Mungyeng city, we confirmed that turbo equalization structure of BCJR has better performance than hard decision and soft decision of Viterbi decoding. We also confirmed that the error rate of decoder input is less than error rate of $10^{-1}$, all the data is decoded. We achieved sucess rate of 83% through the experiment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.8
• /
• pp.1-9
• /
• 2009

In this paper, we describe DSSS transceiver development robust to jamming signals as an investigation of ECCM transceiver for UAV uplink. The jamming margin is 15dB or greater with the development target of transceiver because the jamming margin is more important than the transmission rate of data and the spreading code can be changeable. The rake receiver is applied to combine multipath components and turbo code which the coding gain is 7.2dB as a FEC. In this paper, the whole structure, design method and functional test result about the designed modem are described and a conclusion is made.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.110-118
• /
• 2013

This paper describes the development of DSSS wireless communication uplink system for missile remote control. In consideration of low probability of intercept, low probability of exploitation, anti-jam, low latency, and doppler frequency offset, we used DSSS partially DBPSK. Also we used the selective diversity with two receiving antennas to mitigate multipath interference which is the dominant channel impairment and the turbo product code(TPC) for forward error correction(FEC) to improve bit error rate performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.43-51
• /
• 2013

This paper describes the development of the telemetry link system for the high data rate transmission in high speed rocket application. In consideration of bandwidth efficiency, frequency selective fading and doppler frequency offset, we used DQPSK instead of PCM/FM which has been the primary modulation format in aeronautical telemetry. Also we used the spatial diversity with multiple receiving antennas to mitigate multipath interference which is the dominant channel impairment and the Turbo Product Code for Forward Error Correction to improve bit error rate performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4A
• /
• pp.208-215
• /
• 2003

In this paper, the target FER is derived to achieve the maximum throughput in H-ARQ scheme where the FEC and ARQ are properly combined and proved through the simulation. In numerical analysis, The average upper bound on the FER(Frame Error Rate) of turbo code is derived and the throughput is expressed in terms of this bound. Then, the throughput is differentiated with respect to the FER and the optimal target PER is achieved. As a result of analysisw, the throughput is maximized at the target FER of 6% whereas the target PER is set to 5% in the current 3GPP2 specification.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.5
• /
• pp.516-521
• /
• 2010

In the high-speed packet service, next generation mobile communication system has emerged as a major feature. If the fire of these high-speed D kit services and non-continuous transmission of data due to the symmetrical nature of daeyiteo traffic for D-CDMA system has been actively studied. In this paper, we apply turbo codes for D-CDMA has been investigated. Considering the nature of the system configuration of the transmission frame type, such as physical channel structure and channel coding has been investigated. In addition to TD-CDMA system, one HARQ gibeopjung hase Combining the performance analysis techniques were applied.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.2
• /
• pp.101-106
• /
• 2015

In this paper, to increase the throughput for wireless communication, FTN methods that is faster than Nyquist rate are used recently. To improve performance, turbo equalization algorithms that iteratively exchange probabilistic information between soft Viterbi equalizer and LDPC decoder to minimize ISI are applied in this paper. In FTN transmission, the performance depends on roll-off value and number of tabs of SRRC(Square Root Raised Cosine) filter. Therefore, Based on simulation, this paper present optimal number of filter coefficient and tab for various ISI factor of ${\tau}$.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.271-279
• /
• 2006

This study proposes a new diversity algorithm to improve the signal-to-noise ratio. In the wireless channel, if fading occurs due to the multipaths, the performance of the system is apparently reduced. One of the methods to reduce fadings like this is the diversity method, and this study aims to improve the performance of the system by proposing a new diversity algorithm. This study applied rake receiver It applied QPSK and OQPSK modulation methods and applied the convolutional codes, where the code rate is 1/3 and the constraint length is 9, and the turbo code where the constraint length is 4. Under these conditions, this study compared and analyzed the average error probability of Multicarrier CDMA system.