• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.97-103
• /
• 2001

Polycrystalline thin films of La$_{2}$3/Sr$_{1}$3/MnO$_3$(LSMO) were prepared by water-based sol-gel processing on thermally oxidized Si(100) substrate. The thickness dependence of the low-field tunnel-type magnetoresistance properties at room temperature was studied. Tunnel-type magnetoresistance at low-field is found to be strongly dependent on film thickness. Maximum value of tunnel-type magnetoresistance of LSMO thin films was appeared at the film thickness of ~1500 $\AA$. This behavior can be explained in terms of dead layer between LSMO thin film and Si(100) substrate and thermal lattice strain effect in the LSMO thin films.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.118-122
• /
• 2000

MR characteristics of $Al_2$ $O_3$ based magnetic tunneling juction with various $Al_2$ $O_3$ thicknesses were investigated. Spin-dependent tunneling junctions, in which the tunneling barrier $Al_2$ $O_3$ is formed by depositing a 1-3 nm thick Al layer, followed by thermal oxidation at room temperature in an $O_2$atmosphere, were fabricated on 4$^{\circ}$tilt(111)Si substrate in 3-gun magnetron sputtering system. The top and bottom ferromagnetic electrodes were Ni$_{80}$Fe$_{20}$ and Co. A maximum Tunneling MR ratio of 14% was obtained in the junction of which insulating barrier thickness was 2 nm. By increasing the tunneling voltage across the junction, maximum MR ratio reduced and finally showed no MR characteristics.s.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.98-105
• /
• 1996

스퍼터링 방법으로 제작된 NiFe 박막에서 Ar 압력이 자기 및 자기저항 성질에 미치는 여향을 조사하였다. 타겟으로는 Ni$_{81}$$Fe_{19}$ 조성의 합금타겟을 사용하였다. TEM을 써서 박막의 미세구조를 조사하였으며, 보자력과 포화자화는 VSM으로 측정하였다. 합금박막의 조성은 ICPS로 분석 확인하였다. 10 mTorr 이상의 높은 Ar 압력에서 제작된 박막에서 갈라진 틈새(crack-like void)를 갖는 주상구조가 관찰되었다. 이러한 주상 결정립경계(columnar grain boundary)가 자화 과정에서 자구벽 핀닝자리(pinning site)가 되어, Ar 압력이 커짐에 따라 보자력이 증가 하였으며, 박막의 밀도가 감소하여 포화자화가 줄어드는 것을 볼 수 있었다. 한편, Ar 압력이 증가하면서 자기저항비가 감소하는 결과를 얻었다. 결정립 경계 산란과 결정립간 터널링에 의한 박막의 비저항의 증가가 이러한 자기저항비 감소의 주원인임을 알 수 있었다.다.

• Journal of the Korean Magnetics Society
• /
• v.26 no.6
• /
• pp.201-205
• /
• 2016

In this report, we measured the impedance spectrum in TMR device, and the relaxation behavior of the real and imaginary impedance spectrum was analyzed by using the equilibrant circuit of tunneling capacitance ($C_T$) and tunneling resistance ($R_T$). The relaxation frequency was increased with AC voltage in both the parallel and antiparallel alignment of two magnetic layers. The $R_T$ with AC voltage showed the typical bias voltage dependence. However, the $C_T$ showed large value than the expected geometrical capacitance. The huge increase of $C_T$ was affecting as a limiting factor for the high speed operation of TMR devices. Thus, the supercapacitance of $C_T$ should be considered to design the high speed TMR devices.

• Journal of the Korean Magnetics Society
• /
• v.10 no.4
• /
• pp.159-163
• /
• 2000

MR characteristics in magnetic tunnel junction using CoO as the oxide barrier were investigated. Spin-dependent tunnel junctions were fabricated on 4$\^$o/ tilt-cut (111)Si substrates in 3-gun magnetron sputtering system. The top and bottom ferromagnetic electrodes were Ni$\_$80/Fe$\_$20/(300 $\AA$) and Co(300 $\AA$), respectively. The oxide barriers (CoO) were formed by the thermal oxidation at room temperature in an O$_2$ atmosphere and the plasma oxidation. The increase of coercive field due to antiferromagnetic-ferromagnetic coupling has been observed in O$_2$plasma-oxidized CoO based junctions at room temperature. At a sensing current of 1 mA, MR ratios of O$_2$plasma-oxidized CoO based junction and thermal-oxidized CoO based junction at room temperature were 1% and 5%, respectively. Larger MR ratios are observed in magnetic tunnel juctions with thermal oxidized CoO when sensing current more than applied 1.5 mA. At a sensing current of 1.5 mA, we have observed MR value of 28 % and specific resistance (RA=R$\times$A) value of 10.9 ㏀$\times$㎛$^2$. When specific resistance values reached 2.28 ㏀$\times$㎛$^2$, we have observed that MR ratios become as high as 120%.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.05a
• /
• pp.121-122
• /
• 2009

• Journal of the Korean Magnetics Society
• /
• v.13 no.3
• /
• pp.91-96
• /
• 2003

Cross-geometrical Cr/Co/Al-Ox/Co/Ni-Fe tunnel junctions were fabricated by magnetron sputtering. To form an insulating layer, The Al layer was oxidized in an atmosphere of oxygen-argon mixture at low power after deposition. To enhance the coercivity of the bottom Co layer, The Cr seed layer was deposited on the glass and it led to increase in coercivity. The coercivity increase is due to the increase of roughness through the Cr thickness. In over oxidation time, the oxidation of Co bottom layer and flat interface of insulator can increase the bottom Co coercivity. But TMR ratio gradually decrease. TMR ratio is relevant with Cr thickness, insulator thickness, and oxidation time. The maximum TMR ratio was 14% at room temperature and the TMR ratio was decreased to half at 0.51 V.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.47-51
• /
• 2015

To achieve a high tunneling magneto resistance (TMR) of sputtered magnetic tunnel junctions (MTJs) with an MgO barrier, the annealing process is indispensable. The structural and compositional changes as consequences of the annealing greatly affect the spin-dependent transport properties of MTJs. Higher TMR could be obtained for MTJs annealed at higher annealing temperature. The diffusion of Ru, Mn and/or Ta in the MTJs may occur during annealing process, which is known to be detrimental to spin-dependent tunneling effect. The rapid thermal annealing (RTA) process was used for annealing the MTJs with synthetic antiferromagnets. To suppress the diffusion of Mn, Ru and/or Ta in the MTJs, the process time and temperature of RTA were minutely controlled.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.189-195
• /
• 2001

We prepared TMR junctions of NiFe(170 )/CoFe(48 )/Al(13 )-O/CoFe(500 )/Ta(50 ) structure on 2.5$\times$2.5 $\textrm{cm}^2$ area Si/SiO$_2$ substrates in order to investigate the uniformity of magnetoresistance(MR) value using a ICP magnetron sputter. Each layer was deposited by the ICP magnetron sputter and tunnel barrier was formed by the plasma oxidation method. We measured MR ratio and resistance of TMR devices with four-terminal probe system by applying external magnetic field. Although we used ICP sputter which is known as superior to make uniform films, the standard variation of MR ratio was 2.72. The variation was not dependent on the TMR devices location of a substrate. We found that MR ratio and spin-flip field (H's) increased as the resistance increased, which may be caused by local interface irregularity of the insulating layer. The variation of resistance value was 64.19 and MR ratio was 2.72, respectively. Our results imply that to improve the insulating layer fabrication process including annealing process to lessen interface modulation in order to mass produce the TMR devices.

• Journal of the Korean Magnetics Society
• /
• v.9 no.5
• /
• pp.245-250
• /
• 1999

The effect of substrate and oxidization time on $substrate /Py/Al_2O_3/Co\;(Py=Ni_{81}Fe_{19})$ tunnel junction was studied. Samples were prepared without breaking vacuum by changing shadow masks in-situ. The resistance of tunnel junctions increased, but measured MR decreased with oxidization time. Negative MR observed for samples of tunnel resistivity lower than 0.17 M$\Omega$ $({\mu}m)^2$. MR resistivity decreased with the change of substrates in the order of thermally oxidized Si(111), Si(100), Coring Glass 2948, Corning Glass 7059. Sign change and the variation of MR was explained with non uniform current effect.