• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.42-52
• /
• 1986

This study involves the estimation of optimal ranges of parameters for a linear watershed model. A well-known TANK model was chosen and a linear combination of four tanks assumed. The model was used to simulate daily streamflow for six watersheds of different sizes and by a trial-and-error approach a set of optimal parameters defined. The parameters were related to watershed sizes and land use conditions. Optimal parameters for ungaged conditions were defined from the relationships; daily streamflow simulated and compared to the observed date. The simulated results were in a general agreement with the data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.130-131
• /
• 2017

부유체의 횡동요는 부유체의 안정성을 헤칠 뿐 아니라 승조원의 피로를 누적시키고, 기자재의 안정적인 운용과 수명에도 영향을 미친다. 본 연구에서는 점성감쇠 안티롤링진자를 이용하여 부유체의 횡동요를 줄이는 방법을 제안하고, 안티롤링진자의 효용성을 보인다. 약 1m, 7.7kg의 모형선에 32g, 40g, 50g의 안티롤링진자를 탑재하여 16%~23.5%의 롤링 저감 효과를 얻을 수 있었다.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.412-418
• /
• 2000

The purpose of this study is estimation of daily runoff in the watershed with insufficient hydrological data using tank model. In order to estimate, twentysix watersheds were selected to calibrate tank model parameters that were defined by a trial and error method. Results were correlated with characteristics of watershed. Relationships between the parameters and the watershed characteristics were derived by a multiple regression analysis. The simulation results were in agreement with the observed data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.17-26
• /
• 2021

It is challenging to estimate the fatigue life of construction equipment consisting of a welded joint using field structure test owing to the uncertainty of the S-N curve. IIW recommends different S-N curves for various welded joint types. However, there is no way to define an appropriate curve considering complex design shape and strain gauge characteristics. This paper proposes an equivalent S-N curve method based on the relationship between IIW effective notch stress and virtual stress using finite element analysis. Moreover, a case study was conducted for the excavator fuel tank. The proposed method is expected to enhance accuracy and consistency in calculating the fatigue life for the welded structure of construction equipment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.344-344
• /
• 2021

세계적으로 기후변화 현상으로 인해 극심한 이상 가뭄이 빈번하게 발생하고 있다. 물 공급 소외지역의 경우 가뭄으로 인해 주민들이 불편을 겪고 있으며, 특히 마을상수도 및 소규모수도시설에 의존하는 최상류부 유역의 취수원은 상대적으로 가뭄에 취약하다. 본 연구의 대상 지역은 강원도 춘천시 물로천의 제1지류 유역으로 주민들이 하천 계곡수를 생활용수의 주 공급원으로 사용하고 있다. 해당지역은 갈수기에 생활용수 부족 문제를 겪고 있는 지역으로 가뭄 대응을 위한 구조적 대책으로 다단식 Sand댐을 설치할 예정이다. 현장조사 결과 물로천의 물은 취수조로 일부 유입되며, 자갈 등을 이용하여 부유물 등이 필터링되어 물탱크로 흘러내리며 중력에 의해 각 가정으로 자연 유하하는 것으로 나타났다. 본 연구에서는 대상지역의 하천, 취수조, 물탱크 3개 지점에 압력식 자동 수위 관측기를 설치하였으며, 2시간 간격의 수위를 측정할 수 있도록 설정하여 매달 유속 측정을 통해 수위-유량 관계 곡선식을 바탕으로 유량을 산정하였다. 도출된 일별 유량 자료와 SWAT 모형의 매개변수 검·보정한 후 이를 장기간으로 확장 적용하여 약 10년간의 장기 유출량을 산정하였다. 일별 장기 유출량 자료를 통해 평균 유량 감수곡선과 감수곡선식을 도출하였고, 무강우에 따른 최대 공급가능일수를 산정하였다. 본 연구에서는 하천-취수원 연계 모니터링 및 하천 유량에 따른 공급가능일수 등을 제시하여 가뭄 취약지역의 주민 불편을 최소화하고 가뭄에 대응할 수 있을 것으로 판단된다. 최종적으로 추후 Sand댐 건설 전후 비교 자료로 사용될 수 있으며, 소규모수도시설의 가뭄 관리를 위한 모니터링 체계 및 대응 방안을 구축하였다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.3
• /
• pp.47-55
• /
• 1990

An adaptive algorithm was applied to forecast daily stream flows in real time using rainfall data. A three-component tank model was selected to simulate the flows and its time-variant parameters were self-calibrated with updated data using a parameter optimization scheme, golden section search method. The resulting adaptive model, APTANK, was applied to six watersheds, ranging from 0.47 to 33.62 km$^2$ size and the simulated daily streamflows were compared with the measured. The simulation results were in good agreement with the field data. APTANK is found to be applied to real-time flow simulation purposes such as a tool for irrigation water resources management and operations. The model is particularly good to simulate streamflows on dry days as compared to wet days having runoff-induced precipitation.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.365-372
• /
• 2017

The rolling motion of a floating body makes crews and passengers exhausted and/or applies forces to the structure to cause damage; it might even upset the body. Therefore, almost all ships are equipped with bilge keels for anti-rolling; in special cases, an anti-rolling tank(ART) or fin stabilizer or gyroscope could be installed. But an ART requires a large capacity to install it, and a fin stabilizer and gyroscope need great costs to install and also many expenses to operate. The authors suggest the use of an anti-rolling pendulum(ARP), and they showed that the ARP is effective to reduce rolling by experiments and via a Runge-Kutta analysis. This paper introduces the linearized 2 degrees of freedom with a viscous damping system for a ship equipped with ARP; it also shows the validation of the linearized analysis for the ship's roll motion. The paper proposes an optimum ARP on the basis of the justified model. The case of the 7.7kg model with ship 20g ARP of a mass ratio of 0.26%, is the most effective for reducing roll motion. The paper shows the ARPs with various mass ratios are effective for reducing the roll motion of a ship by free decaying roll experiments.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.2
• /
• pp.73-80
• /
• 2016

To reduce the mechanical energy loss and to get the high energy efficiency, an apparatus of wave power generation inducing a consistent one way rotating motion from the wave reciprocation motions was developed and the hydraulic experiments for the real electric power production were conducted and the results were discussed. In the experiments for the shape of the buoyant tank, the efficiency of the fixed 9 cm diameter type enduring the wave plate weight was 14.6% and this was the best result for all shapes. But although the free sliding type was expected to represent a high efficiency, the experiments did not show a good result as 8.5% efficiency. Therefore, the shape of buoyant tank was decided as the fixed 9 cm diameter type in the next all tests. In the experiments for the various incident waves, when the water depth was 90 cm, the average efficiencies were measured as 3.9% in the 2nd gear, 4.9% in the 3rd gear, 4.9% in the 4th gear, 12.0% in the 5th gear, 10.0% in the 6th gear, 3.1% in the 7th gear, and 3.0% in the 8th gear. Also, when the water depth was 80 cm, the average efficiency was shown as 15.0% with 5th gear condition. Therefore the high average efficiency as 13.5% was given with 80~90 cm water depth and the 5th gear in the model.

• Journal of the Korean Society of Visualization
• /
• v.10 no.3
• /
• pp.30-36
• /
• 2012

We are planning to construct a scaled-down moderator facility to simulate the CANDU-6 moderator circulation phenomena during steady state operating and accident conditions. In the present work a preliminary experiment using a 1/40 scaled-down moderator tank has been performed to investigate the anticipated problems of the flow visualization and measurement in the planning scaled-down moderator facility. We shortly describe CFD analysis result for the 1/40 scaled-down test model and the flow measurement techniques used for this test facility under isothermal flow conditions. The Particle Image Velocimetry (PIV) method is used to visualize and measure the velocity field of water in a transparent Plexiglas tank. Planar Laser Induced Fluorescence (PLIF) technique is used to evaluate the feasibility of temperature field measurement in the range of $20-40^{\circ}C$ of water temperature using an one-color method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.231-235
• /
• 2004

본 연구의 목적은 물 순환의 한 부분을 이루는 지하수에 대한 순환과정을 파악하는 것이다. 이를 위해 금강유역의 10개 지하수 소유역에 대해 지하수 함양량 및 유출량을 추정하였으려, 강수량, 하천유출량 및 증발산량과의 비교를 통해 거시적인 지하수 물 순환 분석을 수행하였다. 각 소유역에서의 지하수 함양량 및 유출량은 하천의 일유출 수문곡선으로부터 추정하는 방법을 이용하였으며, 토양수분 저류구조를 갖는 탱크모형을 이용하여 자 소유역별 하천유출량을 생성한 후 생성된 유출량을 분석하여 함양량 및 유출량에 대한 각 소유역별 특성치를 분석하였다. 분석결과 지하수 함양은 봄철부터 여름철까지 지속적으로 상승하는 형태를 나타내고 있었으며, 가을철에는 매우 작은 함양량을 나타내고 있었다. 지하수 유출의 경우에는 다른 계절에 비해 여름철에 상대적으로 많은 양의 유출을 보이고 있었으며, 나머지 다른 계절에는 상대적으로 유사한 크기의 유출을 보이고 있었다. 또한 모형을 통해 분석된 연간 지하수 함양량과 유출량은 매우 유사한 값을 나타내고 있었으며, 총 강수량과의 비교에서도 과거 연구결과와 유사한 길과를 나타내고 있었다. 따라서 본 연구에서 제시된 유역 내 지하수 물 순환의 정량적 해석은 지표수-지하수 연계 운영의 거시적 해석에 필요한 기본 정보를 줄 수 있을 것으로 판단된다.