• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.20-28
• /
• 2008

It is prevalent to research on the energy saving systems using daylight. Daylight responsive dimming systems are to automatically control lighting output by available daylight for maintaining target illuminance on the workplane. The system application is not popular because of blocked daylight by shading systems. Automated roller shading systems automatically control shade height by sun position and sky conditions. Both daylight responsive dimming systems and automated roller shading systems should be integrated for energy savings and visual luminous environment. In this research, software are developed and integrated for control of integrated systems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.119-127
• /
• 2008

In this paper, the modular line-connected photovoltaic PCS (photovoltaic power conditioning system) is proposed. A step-up DC-DC converter using a active-clamp circuit and a dual series-resonant rectifier is proposed to achieve a high efficiency and a high input-output voltage ratio efficiently. An IncCond (incremental conductance) MPPT (maximum power point tracking) algorithm that improves MPPT characteristic is used. The PV module current is estimated without using a DC current sensor. By control a inverter using a linearized output current controller, a unity power factor is achieved. All algorithms and controllers are implemented on a single-chip microcontroller and the superiority of the proposed DC-DC converter and controllers is proved by experiments.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.166.2-166.2
• /
• 2012

국내에서 개발한 고기동 저궤도 위성이 일본 다네가시마 우주센터에서 2012년 5월 18일 발사되었다. 자세제어계는 위성의 임무수행을 완수할 수 있도록 발사 후부터 위성 수명 기간 동안 자세명령을 생성하고 제어 및 결정을 하며, 궤도 조정과 모멘텀 덤핑등의 임무를 수행한다. 이러한 임무 수행을 가능하게 하기 위해 자세제어계는 적절한 센서와 구동기 조합을 사용하여 추력기 기반 안전모드, 궤도 조정을 위한 Del-V Burn 기동 모드, 태양지향 서브모드 및 목표지향 서브모드 등을 설계했다. 고기동 위성의 초기 운용 중 자세제어계는 자세제어계 하드웨어의 초기 구동 및 점검을 수행하고 설계한 각 모드의 기능과 성능 확인을 수행하게 된다. 본 연구는 성공적으로 완료한 자세제어계 하드웨어의 초기 점검 결과를 소개하는 것이 목적이다. 초기 운용은 위성이 발사된 직후 탑재컴퓨터가 깨어나면서부터 시작되는데, 발사 후 최초 접속시 추력기 기반 안전모드에서 태양 획득 성능 및 제어 성능을 확인한 후 정상 상태 모드인 태양지향 자세로 전환하기 위해 자세제어계 하드웨어인 별 추적기, 자기토커, 반작용휠의 초기 구동 및 점검을 수행하였다. 본 연구에서는 각 하드웨어의 초기 구동 점검과 성능 및 기능 요구조건 만족에 대한 성능 분석 결과를 정리하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.157-168
• /
• 2009

In this paper, a photovoltaic system is designed with a step up chopper and single phase PWM(Pulse Width Modulation) voltage source inverter. Where proposed Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature because solar cell has typical voltage and current dropping character. The single phase PWM voltage source the inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power. from 10 to 20[%]. The single phase PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. In order to enhance the efficiency of photovoltaic cells, photovoltaic positioning system using sensor and microprocessor was design so that the fixed type of photovoltaic cells and photovoltaic positioning system were compared. In result, photovoltaic positioning system can improved 5% than fixed type of photovoltaic cells. In addition, I connected extra power to the system through operating the system voltage and inverter power in a synchronized way by extracting the system voltage so that the phase of the system and the phase of single-phase inverter of PWM voltage type can be synchronized. And, It controlled in order to provide stable pier to the load and the system through maintaining high lurer factor and low output power of harmonics.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.60-64
• /
• 2005

STSAT-2 will demonstrate the scientific mission(acquisition of brightness temperature of the earth at 23.8 GHz and 37 GHz) and spacecraft technologies(laser ranging, frame-type satellite structure, Dual-head star tracker, CCD sun sensor, pulsed plasma thruster, etc.). In this paper STSAT-2 satellite system is described. It includes the definition of the system and the overview of payloads and BUS.

• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.22-25
• /
• 2009

For increasing the output voltage, six SMD(surface mount device) type AlGaAs/GaAs solar cells were connected in series. The electrical properties of the array were measured and compared with one sun (100 mW/$cm^2$) and indoor light (480 lux) conditions. Under one sun condition, output power was 21.57 mW and it was $14.67\;{\mu}W$ under indoor light condition. Under the indoor light condition, the intensity of the light is very low compared to one sun condition. Thus the Voc(open circuit voltage) and Isc (short circuit current) of the sample under indoor light condition decreased very much compared to that of under the one sun condition. This kind of solar cell power supply can be used as a power source for ubiquitous sensor network (USN).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1157-1162
• /
• 2015

The maintenance function of Solar power plant is configured with Sensor devices, Gateway, and Maintenance Function Platform. In this paper, we designed gateway resource tree and service scenario to fit the Maintenance Function and demonstrated appropriate operation of the maintenance service through intelligent functional modeling.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.327-331
• /
• 2008

In this paper, we argue that new&renewable energy resources are difficult to be managed with GIS technology due to their spatiotemporal features, and suggest that spatiotemporal database and sensor network can be applied to the new&renewable energy management system as advanced technology. To give the motivated issues, we introduce and analyze the concept of the spatiotemporal database and sensor network, and the case studies in each applications.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.257-262
• /
• 2008

Available daylight in inside offers comfortable view environment, and psychological and physical advantages to people in the room. But, it has a problem of an excessive direct sunlight. This study calculated daylight responsive dimming control slope by Roller Shade system with Mock-up test. With three 1/2 scale Mock-up rooms, we performed a test for calculation of daylight responsive dimming control slope in different shade height of each room through the different height of roller shade systems. This research will be used as a fundamental study for automated roller shade systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.165-165
• /
• 2000

The sunlight tracking and reflexing system can be divided into two parts. One is a sunlight tracking system and the other is a sunlight reflexing system. The sunlight tracking system detects an azimuth angie and an elevation angle of the sun using 2-axis sensor sun tracker. The sunlight reflexing system controls a reflection mirror to be reflected a sunlight at the target area after getting the azimuth angle and the elevation angle of the sun from the sunlight tracking system. We applied the fuzzy PID controller to control the reflexing mirror.