• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.97-97
• /
• 2015

전 세계적으로 화석연료의 고갈 및 환경오염 문제를 해결하기 위해 신재생에너지에 대한 관심이 급증하고 있다. 이러한 신재생에너지에는 수소 에너지, 자연 에너지(태양열, 지열 등), 바이오 매스 에너지 등이 포함된다. 이 중 수소 에너지는 지구상에 풍부하게 존재하고 있는 물과 탄화수소로부터 얻어지며, 연소 시에도 다시 물을 형성하여 오염 물질을 배출하지 않는 차세대 무공해 에너지원으로써 주목을 받고 있다. 수소 제조를 위한 공정에는 수증기 개질 공정(steam reforming), 부분 산화(partial oxidation) 및 자열개질(autothermal reforming) 등이 있으며 실제로 생산되는 대부분의 수소는 탄소/수소비(1:4)가 높은 메탄($CH_4$) 가스를 이용한 메탄 수증기 개질 공정(steam methane reforming)을 통하여 제조된다. 이 때 수소 제조의 고효율화 및 저비용화를 위해서는 반응물에 대한 높은 선택도, 고활성도 및 높은 안정성을 갖는 촉매가 반드시 필요하며, 대표적으로 Ni, Pt, Ru 등이 보고되고 있다. 이러한 촉매들은 대부분 세라믹 pellet 형태로 제작되어 왔으나 열전도도가 낮고 물리적 충격에 취약하다는 단점이 존재한다. 따라서 우리는 이러한 단점을 극복하고, 촉매의 활성을 높이기 위하여 다공성 금속 합금 폼을 촉매 지지체로 도입하였다. 또한, 다공성 금속 합금 폼 표면에 촉매의 분산 및 안정성을 향상시키기 위해 지지체와 촉매 사이에 원자층 증착법을 이용하여 inter-layer를 도입하였다. 이들의 구조, 형태, 및 표면의 화학적 상태는 주사전자현미경, EDS (energy dispersive spectroscopy)가 탑재된 주사전자현미경, X-선 회절, 및 X-선 광전자 분광법을 이용하여 규명하였다. 더하여 정전압-전류 측정법 및 유도 결합 플라즈마 분광 분석기을 이용하여 전기 화학 반응을 유도하고, 반응 후 전해질의 성분분석을 통해 촉매와 지지체 간의 안정성을 평가하였다. 따라서 본 결과들은 한국진공학회 하계정기학술대회를 통해 좀 더 자세히 논의될 것이다.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.83-88
• /
• 2020

This paper proposes a method of applying an advanced preamble detection technology to wireless sensor nodes and analyzes the trade-off relationship between throughput and fairness that may occur when sensor nodes equipped with the MIM function compete with the legacy IEEE 802.15.4 sensors. Sensor nodes employing the MIM capability have more chances of concurrent transmissions than the legacy IEEE 802.15.4-based sensor nodes, resulting in gains in terms of throughput, whereas the transmission opportunities of 802.15.4 sensor nodes might be limited due to the additional simultaneous transmissions of the MIM sensor nodes. The extensive evaluation results performed under a test environment built using Python program with reflecting the setting value of a commercial sensor node shows MIM sensor nodes outperform up to 40% over the legacy 802.11 sensors. Meanwhile, it was confirmed that a balance can be achieved in terms of throughput and fairness by properly adjusting the concurrent transmission threshold.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.31-38
• /
• 2011

With the increasing demand for high-speed transmission systems, adaptive equalizers have been widely used in receivers to overcome the limited bandwidth of channels. In order to reduce the cost for testing high-speed receiver chips, on-chip eye-opening monitoring (EOM) technique which measures the eye-opening of data waveform inside the chip can be employed. In this paper, a 10-Gb/s adaptive 2-tap look-ahead decision feedback equalizer (DFE) with EOM function is proposed. The proposed EOM circuit can be applied to look-ahead DFEs while existing EOM techniques cannot. The magnitudes of the post-cursors are measured by monitoring the eye of received signal, and coefficients of DFE are calculated using them by proposed adaptation algorithm. The circuit designed in 90nm CMOS technology and the algorithm are verified with post-layout simulation. The DFE core occupies $110{\times}95{\mu}m^2$ and consumes 11mW in 1.2V supply voltage.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.807-810
• /
• 2014

로봇 시스템의 제어 및 이를 이용한 환경 인식에는 많은 전자 광학 소자들이 사용되고 있다. 로봇 제어회로에 사용되고 있는 Si CMOS 공정의 CPU, ASIC, FPGA 소자는 고 선량의 감마선에 취약하다. 환경정보 수집용으로 로봇에 탑재되는 CMOS/CCD 카메라의 관측영상에는 고선량 감마선으로 인한 speckle (백색잡음, white noise) 들이 나타나며, 이들이 카메라의 관측성능을 저하시킨다. 후쿠시마 원자력발전소 사고와 같이 원자력시설에서 제어불능의 심각한 사고가 발생되면 고선량 감마선이 방출된다. 이러한 고선량 감마선방출은 사람에 의한 사고수습을 불가능하게 하며, 사고 수습을 위해서는 로봇의 활용이 불가피하다. 그러나, 방출되는 고선량 감마선의 세기(선량율)가 지나치게 높을 경우, 로봇 전자회로가 장애를 일으키기 때문에 로봇의 적절한 임무수행이 가능한 감마선 세기에 대한 고려가 필요하다. 본 논문에서는 고선량 감마선 환경하에서의 로봇 탑재 CCD/CMOS 카메라의 관측 성능을 고려하여 100 Gy/h 를 감마선 선량율 제한조건으로 설정한다. 그리고, 재 가동 승인심사를 받기 위해 일본의 원전 운영자들이 제시한 PWR (가압경수로) 원전의 중대사고 대책 적합성 평가문서에 나타난 노심용융개시 시점의 원자로 격납건물내 감마선 선량율 추이 계산결과를 활용하여 로봇의 대응시간을 계산하였다. 문서 (PDF) 에 표현된 감마선 선량율 추이 그래프를 영상 판독하여, 격납건물내 감마선 선량율이 100 Gy/h 제한조건에 도달하는 시간을 계산하였다. 이를 로봇의 대응시간으로 설정한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.552-560
• /
• 2013

In this paper, an optimization algorithm for the block assembly accuracy control assessment is proposed with consideration for the current block assembly process and accuracy control procedure used in the shipbuilding site. The objective function of the proposed algorithm consists of root mean square error of the distances between design and measured data of the other control points with respect to a specific point of the whole control points. The control points are divided into two groups: points on the control line and the other points. The grouped data are used as criteria for determining the combination of 6 degrees of freedom in the registration process when constituting constraints and calculating objective function. The optimization algorithm is developed by using combination of the sampling method and the point to point relation based modified ICP algorithm which has an allowable error check procedure that makes sure that error between design and measured point is under allowable error. According to the results from the application of the proposed algorithm with the design and measured data of two blocks data which are verified and validated by an expert in the shipbuilding site, it implies that the choice of whole control points as target points for the accuracy calculation shows better results than that of the control points on the control line as target points for the accuracy of the calculation and the best optimized result can be acquired from the accuracy calculation with a fixed point on the control line as the reference point of the registration.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.270-277
• /
• 1998

As the network technologies advance, the control systems progress from a centralized architecture to a distributed one. However, these control systems were designed mostly based on the general-purpose operating systems(OS) and have many problems for assurance of a real-time property required for plant processing fields. Therefore, the control systems far a plant process upon real-time OS hare been increased gradually. In this paper, the real-time OS emphasizes on the realization of real-time processing capability, reliability of real-time response, and multi-processing functionality which are prerequisites for a distributed control system. And on the basis of this OS, the number of executable loop and logic, the functions of main plant processing, was analyzed and its validity was also evaluated. The system in this paper was designed not to effect on processing data while online, and the time spent on switching was measured.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.222-225
• /
• 2001

The planar type inductors have a good potential for the application of miniaturized low power DC-DC converters. For those high quality application, the reduction of coil loss and also magnetic films which have good high frequency properties are required. Fabricated inductor was consisted of FeTaN/Ti magnetic film and electroplated Cu coil thickness of 100$\mu\textrm{m}$ and $SiO_2$ as a insulating layer. The inductor was designed double rectangular spiral shape for magnetic field highly confining within the device. The measured value of inductance and resistance were 980 nH and 1.7 $\Omega$ at 1 MHz as operating frequency of device. The Q factor is 3.55 at 1 MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.7-13
• /
• 2002

BSCT 320${\times}$240 IRFPA detector module is implemented, which is a key component in uncooled thermal imaging systems. The detector module consists of two parts, infrared sensitive pixel array and read-out integrated circuit(ROIC). The BSCT 320${\times}$240 pixels are made by laser scribe process and 10-${\mu}m$ micro-bump to satisfy 50-${\mu}m$ pitch and 95-% fill-factor. The ROIC has been designed to electrically address the pixels sequentailly and to improve signal-to-noise ratio with single transistor amplifier, HPF, tunable LPF and clamp circuit. The fabricated hybrid chip of detector and ROIC has been mounted on the TEC built-in ceramic package for more stable operation and tested for lots of electrical and optical properties. The IRFA sample has shown successful properties and met with good results of fill-factor, detectivity and responsivity.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.115-122
• /
• 2013

Construction Standard Productivity Manual (CSPM) has been used for estimating the contract amount of public construction projects. CSPM has been annually either revised and/or newly enacted with high costs. Therefore, This study makes use of CYCLONE, which is a simulation modeling and analysis system specialized in construction operation, to improve the revising and enacting processes of CSPM. This paper presents the CSPM revision module that is an Add-in to Web-CYCLONE. The new module can be effectively used to incorporate the auxiliary tasks and the non-productive tasks into AL-Form operation model. The outputs obtained from the models using he CSPM revision module and from work sampling were compared to verify the usability of the add-in modules. This study verifies that the new module can effectively assist enacting and/or revising CSPM.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.55-62
• /
• 1998

Soils contaminated with hydrocarbons and residual metals can be effectively treated by soil washing. In developing the soil washing process several major effects for separating contaminants from coarse soils progressively improved upon combinations of mining and chemical processing approaches. The pilot-scale soils washing process consists of the four major parts : 1) abrasive scouring, 2) scrubbing action using a washwater that is sometimes augmented by surfactants or other agents, 3) rinsing, and 4) regenerating the contaminated washwater. The plant was designed based upon the treatment capacity > 5 ton/hr on site. The lumpy contaminated soil fractions first experience deagglomeration and desliming passing through a rolling mill pipe. In the second unit the attrition scrubbing module equipped with paddles uses high-energy to remove contaminants from the soils. And a final rinsing system is assembled to separate the washwater containing the contaminants and very fine soils from the washed coarse soils. For recycling the contaminated washwater passes through a washwater clarifier specifically designed for flocculation, sedimentation and gravity separation of fine as well as flotation and separation of oils from the washwater. In order to more rapidly assess the applicability of soil washing at a potential site while minimizing the expense of mobilization and operation, a mobile-type soil washing process which is self-contained upon a trailer will be further developed.