Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2000.11a
/
pp.115-115
/
2000
제지 공정의 효율적인 운영을 위해 공정변수를 확인하는 작업은 매우 중요하다. 탈수 특성 평가를 위하여 SR(Shopper- RegIer)과 CSF(Canadian Standard Freeness tester) 그리고 원형 수초지기 동의 비난류 상태의 자연탈수 특성 평가 장치와 동적 조건의 감압식 탈수성 분석기 퉁이 도입되어 있으나 제지 공정에 보다 더 근접한 탈수, 보류 특성을 평가 하기 위하여 특히 wet-end 첨가제들의 효능을 보다 정확히 분석할 수 있도록 난휴 발생과 감압 탈수 둥을 유도한 탈수 특성 평가 장치 개발의 필요성이 커지고 있다Il, 2) 이미 소개된 RDA-HSF
Dewatering process to remove water from pigment sludge was important in the diverse aspects of the improvement of product quality, curtailment of the drying cost and the transportation. It was difficult to dewater pigment particles with the mechanical forces because the size was fine under $5{\mu}m$. Thermal filter press dewatering equipment composed of squeezing plate and a fixed heating plate was developed to improve the dewaterability of pigment the sludge as supplying the heat from the fixed heating plate to the cake. Several tests that estimate the dewaterability for pigment sludge as with or without squeezing process and the difference of dewatering time was conducted with this equipment. Dewaterability of thermal dewatering under squeezing process was increased about 20% compared with non squeezing process. Under squeezing process, thermal dewatering tests changing dewatering time with 70 and 80 minute were conducted respectively. The water content of cake was more reduced at dewatering time of 80 minute compared with 70 minute, and dewatering velocity was also decreased, which caused the productivity of thermal filter press to drop. It was observed that clogging of filter cloth didn't almost occur because the liquid was discharged from cake layer easily. In this research, it was resulted that the squeezing process and long dewatering time were effective to improve the dewaterability of pigment sludge. So, this thermal filter press equipment was useful for dewatering the fine particle sludge like pigment.
The DIS process(dewatering and impregnation soaking process) are using for dewatering of food materials at room temperature. And the DIS process are resulted in diffusion process as well as dewatering phenomena. During the DIS process, plasmolysis or cytorrhysis was happened by according to solute size. A tissue state of food material was very important variables for movement of water or solute, and running conditions are important for dewatering and impregnation. And models for DIS process were fundamentally given by Fick's law at unsteady state or mass balance. For example, Bicompartmental Model was given for quantification of water loss and solid gain.
Park, Seon-Mi;Park, Mi-Jung;Ha, Ji-Soo;Chang, Hyuk-Sang
Clean Technology
/
v.16
no.2
/
pp.145-152
/
2010
Various technical methods are applied for removing water from the water-retaining media, and the energy efficiency is the main concern in those methods. The electroosmotic process is studied as an efficient way for dewatering. An experimental electroosmotic reactor is designed and used for evaluating the effects of operational variables. The operational variables such as the electrical fields and the structure of water-retaining medias were studied. Three different shapes of polarized electric fields in ranges of 0-100 V/cm and 0-10 kHz are used as the source of electric voltage. The effect of electroosmotic process with respect to the structural variation is estimated by filling the electroosmotic reactor with the glass beads in 0.18 mm, 0.35 mm and 1.2 mm in diameters. 6% of water removal is obtained in the simulating electroosmotic reactor of glass beads. The estimated energy consumption in the simulating electroosmotic was 330~490 cal/g-water.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.04a
/
pp.80-80
/
2001
제지 공정의 효율적인 운영을 위한 수단으로 보류 및 탈수성의 분석은 매우 중요한 작 업 이 다. 보류 및 탈수 특성 을 평 가하기 위 하여 SR(Shopper-Riegler), CSF(Canadian S Standard Freeness tester) 그리고 원형 수초지기 등의 비난류 상태의 자연탈수 특성 평가 장치와 동적 조건의 감압식 탈수성 분석기 등이 사용되고 있다. 하지만 이것들은 제지 공정 에 보다 더 근접한 탈수 및 보류 특성을 평가하기에는 부족한 점이 있다. 특히 wet-end 첨 가제들의 효능을 보다 정확히 분석하는 것이 불가능하다. 이런 이유로 난류 발생과 감압 탈 수 둥을 유도한 탈수 특성 평가 장치 개발의 필요성이 커지고 있다. R RDA - HSF(Retention Drainage Analyzer- Handsheet Former)는 지료조성, 감압탈수 및 습지의 성형이 자동화되어 보류도와 탈수성, 종이지합 및 강도를 종합 평가 할 수 있는 새 로운 실험실용 초지기이다. 보다 현장에 가까운 초지 조건을 구현하기 위해서 지료의 농도 를 높이고 진공 탈수를 실시함에 따라 기존의 탈수성 분석기나 보류도 측정기의 단점을 보 완하게 되 었다. 본 연 구에 서 는 Canadian Standard Freeness test와 Dynamic Drainage Jar test 및 원 형 수초지기를 활용한 기존의 탈수성, 보류도 분석 결과와 RDA-HSF를 비교하여, 자연 탈수를 이용하는 기존의 탈수 및 보류 설비에 비해 현장 공정을 보다 현실적으로 재현할 수 있는 감압 탈수 초지 설비로서 RDA-HSF의 활용 가능성을 분석하였다. RDA-HSF를 활용한 실험실적 분석을 통해 현장의 상황올 유사하게 재현함에 따라 공정 운영 인자의 변화에 따른 제품의 품질 및 생산효율을 예측할 수 있게 된 바, 보다 효율적 인 공정 관리가 가능할 것으로 기대된다. 안료 입자의 경우 피인쇄체의 표면 공극을 채우고, 비히클의 경우 미세한 공극속으로 침투되어 경화됨으로써 피인쇄체가 지니고 있는 공극량을 감소시커 게 될 것이다. 그리고 피인쇄체의 각종 형태의 공극으로 침투된 잉크의 양에 반비례적으로 피인쇄체의 표변에 잉크가 잔류하게 될 것이다. 따라서 본 연구에서는 여러가지 안료를 사용하여 각각 다른 공극 특성을 지니는 도공지를 제조한 후 이들이 가지는 공극 특성과 잉크의 잔류 거동에 대해 고찰해 보고자 하였다.여 표면 유효층 일부만 오버레이시키며I 주조 및 단조가 불가능한 재료까지도 표면부에 오버레이 시킴으로 서 부품 및 설비의 제조에 있어 재료비의 절감과 제품의 수명이 획기적으로 개선될 수 있다. 그리고 최근에는 도금 빛 용사 둥과 같은 표면처리를 할 경우임의 소재 표면에 도금 및 용 사에 용이한 재료를 오버레이용접시킨 후 표면처리를 함으로써 보다 고품질의 표면층을 얻기위한 시도가 이루어지고 있다. 따라서 국내, 외의 오버레이 용접기술의 적용현황 및 대표적인 적용사례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)로 이주된지 14일(日) 이후에 신장(腎臟)에서 수축된 것으로 나타났다. 30%o의 해수(海水)에 적응(適應)된 틸라피아의 평균 신사구체(腎絲球體)의 면적은 담수(淡水)에 적응된 개체의 면적보다 유의성있게 나타났다. 해수(海水)에 적응(適應
Ginger was dried using maltodextrin or recycled dehydration liquid as dehydrating agents, and the quality of dried ginger was compared with that of freeze-dried and hot-air-dried samples in terms of color, moisture content, water activity, dehydration rate, rehydration rate, and sensory properties. Ginger prepared using molecular press dehydration (MPD) retained its original color. The dehydration rate increased when ginger was dried using a dehydrating agent. The rehydration rate was increased in ginger dried using such an agent. Both dehydration and rehydration rates were elevated with increasing concentrations of soluble solids in the dehydration liquid. The sensory qualities of ginger prepared using the MPD method were better than those of freeze-dried and hot air-dried samples. These results indicate that drying of ginger rhizomes using recycled dehydrating liquid is very efficient.
Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
/
2001.11a
/
pp.69-69
/
2001
최근들어 활엽수 펄프와 재생섬유의 사용이 증대되고, 용수절감을 위해 초지공정이 점차 폐쇄화되어감에 따라 초지계 내의 미세분 함량이 증가하고 있으며, 이로 인해 탈수조건은 더욱 악화되고 있다. 하지만 현재 진행되고 있는 초지속도의 고속화를 위해서는 습부에서 의 탈수를 더욱 촉진시킬 필요성이 대두되고 있으며, 이를 위해 여러 가지 방안이 모색되 고 있다. 탈수현상은 원료조성, 초지설비의 종류와 공정구성, 화학첨가제의 사용 여부 등 매우 다양 한 인자에 의해 영향을 받는다. 일반적으로 어떤 주어진 설비를 이용하여 목표 품질의 종 이를 생산하고자 할 경우 초지설비, 운전조건, 펄프 원료, 고해 조건 등은 쉽게 변화시키 기 어렵기 때문에 초지기에서의 탈수성을 조절하기 위해서 각종 탈수촉진제가 사용되고 있다 이러한 탈수촉진제의 선정 및 현장 적용에 앞서 실험실적인 평가가 우선적으로 이루어져 야 하는 것은 당연하다. 탈수성의 실험실적인 평가를 위해 1990년대부터 Britt Jar를 변 형시킨 Dynamic Drainage Analyser(DDA)가 폭 넓게 활용되고 있다 .. DDA는 지필 형 성 시 나타나는 스크린 하부에서의 진공도를 측정하여, 갈수선에서의 탈수시간을 도출하 고 탈수성을 평가할 수 있는 장치이다. 그러나 탈수촉진제와 같은 첨가제의 성능을 평가할 경우, 그 첨가 정도에 따라 지료의 보류도가 달라져 측정되는 탈수시간에 영향을 주므 로 이러한 방식으로 얻은 탈수시간은 정확한 의미에서의 탈수성 평가방법이라 할 수 없 다. 이에 탈수성 평가 시 보류의 영향을 반영하는 방법에 대한 연구가 필요하다. 탈수성의 평가에 있어 탈수시간과 더불어 습지필의 건조도에 대한 고려 역시 필수적이다. 건조도는 DDA를 이용할 경우 지펼 형성 이후 나타나는 최종 진공도의 정도로 표시되는투기도를 통해 파악되나 적용되는 보류 및 탈수 시스템의 종류에 따라 나타나는 응집 양상은 다양하므로 경우에 따라서 탈수시간과 습지필의 투기도가 서로 반대되는 결과를 나 타내기도 한다. 본 연구에서는 탈수시간 뿐만 아니라 습지필의 건조도를 동시에 고려함으 로써 DDA를 이용하여 더욱 정확하게 탈수성을 평가할 수 있는 방안을 모색하였다.
Proceedings of the Korean Environmental Sciences Society Conference
/
2003.11b
/
pp.310-311
/
2003
본 연구에서는 폐수산자원인 불가사리와 조개껍질 분말을 이용한 탈수보조제(물리개량제)의 가능성을 확인하였다. 불가사리와 조개껍질을 이용한 탈수보조제는 유가자원 소모라는 기존의 탈수보조제의 문제점을 보완하여 폐자원의 자원화라는 이점이 있으며 탈수케이크의 함수율을 효과적으로 낮추어 주어 소각등의 후속공정에 도움을 줄 수 있는 것으로 사료된다. 뿐만아니라 천연 비료로 사용되어지는 불가사리의 활용이라는 점에서 탈수슬러지 퇴비화등 자원 재이용에의 적용성 또한 증대시킬 수 있다.
Pervaporation separation is one of promising membrane technology for the energy saving processes and it has been developed to separate complex mixture systems including azeotropic mixture, close-boiling mixture, aqueous organic mixtures etc. Many researchers focused on dehydration pervaporation separation and they commercialized ethanol dehydration and isopropanol recycling processes. Nowadays, petroleum separation and volatile organic compound removal using pervaporation membranes is one of the emerging application of pervaporation separation. We reviewed the development and application of pervaporation membranes.
Proceedings of the Membrane Society of Korea Conference
/
1996.03a
/
pp.45-67
/
1996
현재 투과증발은 유기용제/물의 탈수, 유기/유기분리, 이성질체의 분리, 폐수중의 유기물의 분리등에 응용이 되고 있으며, 그 중에서 유기용제/물 혼합물중 에서 물을 선택적으로 분리하여 유기용제를 농축하여 건조시키는 공정이 가장 많은 발전이 이루어졌다. 일반적으로 유기용제는 그 용도의 전개에 있어서 물을 함유하고 있을 경우 제 기능을 발휘하지 못하기 때문에 포함하고 있는 물의 농도를 가능한 최소화하여야 한다. 본 고에서는 탈수용 투과증발막의 개발에 관련하여 막재질의 선택과 탈수용으로 연구되어온 고분자막 소재에 대하여 알아보고, 실제적으로 고분자막이 유기용제의 탈수에 어떻게 응용이 되는지를 알아보겠다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.