• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.761-772
• /
• 2023

The fire resistance design of timber structures involves calculating the residual section based on charring depth, which is then utilized in structural design. Charring depth is determined from fire-resistance test results in Korea, which currently do not account for the charring properties of the adhesive used in Glued Laminated Timber(GLT) production. This study fabricated GLT using various adhesives employed in domestic GLT production, comparing the charring properties by adhesive type and the fire resistance performance relative to the directionality of the laminated surface. Melamine demonstrated the most advantageous fire resistance performance, followed by resorcinol and polyurethane. Furthermore, it was established that the laminated section exhibited a higher charring rate, influenced by the adhesive, compared to the laminated surface, which significantly impacts the fire resistance performance.

• Journal of Conservation Science
• /
• v.19
• /
• pp.73-84
• /
• 2006

The conservation methods for the charred-woods excavated under the Daewoongjeon Hall of Youngguksa Temple, Youngdong, Chungbuk, Korea were investigated. The tests revealed that PEG#400 10% for four days followed by gradual application of PEG#4000 10% to 40% showed the most stable and robust results, showing no cracks in macroscopic examination. This treatment method was applied to the two charred elements, which appeared to be the capitals at the excavated site. After the treatment, the consolidated capitals were transported to the laboratory, where they were retreated with PEG#4000 80% at $85^{\circ}$.... Charred capitals showed also an excellent level of stability.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.4
• /
• pp.21-28
• /
• 2007

To analyze the changes in pH and elemental content ratio of wood charcoal and in FT-IR spectra of their surfaces, wood charcoals carbonized from Pinus koraiensis were used. pHs of wood charcoals carbonized from Pinus koraiensis at 300 and $400^{\circ}C$ were 5-27 and 6.80, respectively, whereas they were between 9.25~10.35 for the wood charcoals manufactured between $500{\sim}900^{\circ}C$ From the changes in the elemental ratios of Pinus koraiensis wood charcoal by increasing carbonization temperature, carbon (C) contents increased by elevating the carbonization temperature with the decreasing in content ratios of O and H. The largest changes in the ratio was found between the carbonization temperature 400 and $500^{\circ}C$. Ratios of C, O, H of the wood charcoal manufactured at 300 and $400^{\circ}C$ were 67.7, 28.9, 3.0% and 72.2, 24.9, 2.5%, respectively, while those at $500{\sim}900^{\circ}C$ were between 83.3~90.5, 13.6~9.0, 2.7~0.3%. The surface functional groups of Pinus koraiensis wood charcoals were determined by comparison of FT-IR spectra of the wood powder and the wood charcoal carbonized with the wood powder. The functional groups on the surface of wood charcoals carbonized at 300 and $400^{\circ}C$ were considered to be acidic groups like Lactone, Lactol, Carboxylic acid, Carboxylic anhydride, whereas Pyrone types could be the major functional groups for the wood charcoals carbonized between 500 and $900^{\circ}C$.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.1-5
• /
• 2001

In this study, it was examined the effect of carbonized wastewoods on soil improvement and effect of charcoal size on tree seedling growth Thuja accidentalis seedlings grow better in the charcoal-treated soil than in the non-treated soil. Especially Pinus koraiensis charcoal with good adsorption. brought the best growth result. The charcoal treatment also improved the height growth of transplanted Aesuculus turbinate seedling However charcoal sizes(i.e. powder and particle) did not affect the growth of the seedling. Also apple trees which had been suffering from rotten roots caused by root rot was recovered by application particle-sized charcoal.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.28-33
• /
• 2007

In this paper, we are studied on the direction and formation of carbonized conductive path according to surface leakage current between electrodes. The characteristics of the tracking as surface is broken down between exposed live parts. Using the HSIS(high speed imaging system. 100,000[fps], redlake ltd., USA), it took photographs by arc growth mechanism occurred in on/off surge, ground fault and discharge between electrodes. Then the results was analyzed. Hereafter, it expected effects that application of energy utility technology through the arc control.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.91-98
• /
• 2011

This study is about fire resistance performance of wood framed lightweight wall including a middle lintel as a traditional wall form in Korea. The target wall is non-loadbearing system which constructed with $38{\times}89$ mm ($2"{\times}4"$) wood frame and fireproof gypsum board covering, including a middle lintel made of $150{\times}150$ mm section glue-laminated timber. As a test results, all specimens have showed fire resistant performance over 90 minutes and tests were maintained until flame occuring on Specimen-l, 2, 3 at 91 min, 97 min and 98 min respectively. Fire resistance of the heat side gypsum board was 45 minutes and charring rate of middle lintel was equivalant with that of usual timber. The wood stud inside wall system showed relatively quick combution characteristic when exposed to high temperature with no temperature rising delaying time caused by moisture evaporation because of the dehydration preceded during the early period of fire side gypsum board resist to heat.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.139-141
• /
• 2009

This study analyzed the effect of the microstructure and alloying element on hydrogen-induced delayed fracture properties for the Energy Saving Wire (ESW) developed recently. Specimens were produced with a diameter 6.5mm post to the deformation (0, 10, 20 and 30%), followed by injecting the hydrogen. The experimental results by using GAS chromatography showed that the more hydrogen was emitted for high-carbon steel (0.45%C steel and 0.35%C steel) than low-carbon steel(0.2%C-Cr steel and 0.2%C-Cr-Mo steel). And, 0.45%C steel, 0.35%C steel and 0.2%C-Cr-Mo steel exhibited the crack for 30% deformed specimen. The hydrogen emitted was analyzed with the amount, the spheroidization, and the size of the carbides.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.84-92
• /
• 2008

Anatomical and physical characteristics of Pinus densiflora woods damaged by forest fire at Yangyang-gun, Kangwon-do were investigated in present study. Even though the bark was severly carbonized, no trace of carbonization in the xylem was found. The amount of resin exudation was different by the degree of fire damage. Green moisture content of sapwood in the damaged wood was lower than that in the sound wood, but vice versa in the heartwood. Green density of heartwood in the damaged wood was higher than that in the sound wood, but there was no significant difference in sapwood. Cambial activities were found stopped in the severely damaged wood but were identified in the lightly damaged wood. In safranine staining process, epithelial and ray parenchyma cell walls in the damaged woods showed darker hue than those in the sound wood. Granular substances were observed in the lumina of ray parenchyma and epithelial cells of the severely damaged wood. Relative crystallinity of the outermost growth ring in the severely damaged wood was slightly higher than that in the sound wood.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.318-326
• /
• 2014

This study was conducted to investigate the potential of non-used forest biomass residues as raw materials for making wood pellets with additives such as wood tar and starch and to evaluate fuel characteristics of the pellets. Wood tar, a by-product provided from the carbonization process of wood, could be a suitable additive for wood pellet production due to its higher calorific value and lower hazardous heavy metals, such as cadmium and mercury, compared to woody biomass. When the wood tar (10 wt%) was added, the calorific value was increased from 4,630 kcal/kg (wood pellet without additive) to 4,800 kcal/kg (wood pellet with additive). With the increase of additive amount into wood pellet, the length and individual density of wood pellet increased. In addition, bulk density of the pellets was increased, whereas the fine content was decreased. Consequently the overall productivity of wood pellets was improved by adding 2 w% additives into wood pellets; the percentage of productivity increase was 5.9% and 4.9% for adding starch and wood tar, respectively.

• 월간산업보건
• /
• s.107
• /
• pp.2-10
• /
• 1997

직업성 피부질환은 1988년 미국 전체 직업성 질환중 20%에 해당된다(미 노동부 자료 참고). 그 비율은 주에 따라 크게 달라지기도 한다. 피부질환은 어떤 주에서는 보상되는 직업성 질환의 대다수를 차지하기도 한다; 예를 들어, 캘리포니아와 플로리다주에서는 농작물에 의한 접촉성 피부염이 흔하다. 접촉성 피부염은 직업성 피부질환으로 보고되는 가장 흔한 피부질환이다. 이러한 사례의 4/5는 유기용제, 절삭유, 세척유, 알칼리, 산 등과 같은 자극성 화학물질에 대한 노출과 관련이 있다. 자외선은 어떤 화학물질(예를 들면, 코울 타르, 크레오소오트)과 반응하여, 이 화학물질 및 빛에 노출되는 부위에 자극성 접촉성 피부질환을 유발하기도 한다. 1/5의 사례는 에폭시 수지, 크롬, 식물 수지, 그 밖의 많은 것 등 특수 접촉 감광제와 관련될 수 있다. 강한 자극제에 노출되어 발상하는 화학적 화상은 비교적 흔하게 일어난다. 백반과 유사한 피부탈색은 드물게 일어나며 피부 접촉을 통하여 야기하는 특수 화학물질과 관련될 수 있다. 여드름과 모낭염은 기름 및 유지들과의 피부 접촉을 통하여 생겨날 수 있다. 10대 여드름과 구별되는 염소성 여드름이라고 불리는 질환은 여러 종류의 염화 탄화수소들(예를들면 다브롬화 디페닐, 다염화 디페닐, 디옥신)에 노출되어 발생되기도 한다. 신체적인 손상으로 반복되는 외상부위에 가골이 형성되기도 한다. 여러 종류의 일에 특징적인 것(예를 들면 바이올린 연주자의 목에 가골)이 소위 "직업적인 표지" 이다. 전기톱 작동 기술자, 분쇄기 작동기술자, 지하 광산 암석 천공 기술자에게서 발생하는, 손 - 팔 부위의 진동은 오랜기간 혹은 심하게 노출된 노동자에 있어서 - 손에 혈관수축질환 - 진동장애 백색 수지질환을 일으킬 수 있다. 피부암은 직업과 관련이 있다고 할 수 있다. 하지만 몇몇 사례가 산재 관련 기관에 보고외어 있지만, 암등록소에 보고는 불완전하며, 피부암으로 인한 사망은 드물기 때문에 피부암의 발생률은 알 수 없다. 예방적인 방법은 개인보호구(장갑, 구두 등), 기계공학적 통제, 노동자 교육, 피부에 노출되는 것을 피하기 위해 주어진 일을 맡는 노동자들의 교대와 같은 관리적인 통제가 있다. 이러한 방법들은 화학적 화상, 알러지성 접촉성 피부염과 같은 피부염, 진동장애, 직업관련성 질환(예를 들면, 건선, 단순태선, 백반)을 예방하는데 도움이 된다. 만성 자극성 접촉성 피부염은 아직 잘 이해하고 있지 못하여 현재 예방하는 방법은 아직 만족스럽지 못하다.