• 제목/요약/키워드: 탄소섬유 강화 복합재

검색결과 135건 처리시간 0.025초

직교이방성 복합적층판의 초음파 탐사에 관한 연구 (A Study on the Inspection of Orthotropy Composite Laminate plates Using Ultrasonics)

  • 나승우;임광희;양인영
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2000년도 추계학술대회 논문집
    • /
    • pp.583-586
    • /
    • 2000
  • This work ethibits how susceptive the shear ultrasonic waves are to a little misoriented plies according to the angle variation of shear ultrasoic waves $0^\circ$ , $45^\circ$ and $90^\circ$. Also, it is shown that shear waves, particularly the transmission mode with the transmitter and receiver perpendicular to each other, have high sensitivity for detecting anomalies in fiber orientation and ply layup sequence that may occur in the manufacturing of composite laminates. Experimental results are agreed with modeling solutions which were based on decomposition of shear wave polarization vector as it propagates through the composite laminates. This wave appeared considerably to be sensitive to CFRP composites to the thickness direction along in-plane fibers.

  • PDF

고온 다습한 환경에 장기간 노출된 CFRP 복합재료의 특성 분석 (Analysis of Characteristics of CFRP Composites Exposed Under High-Temperature and High-Humidity Environment for a Long Period)

  • 홍석우;안상수;구재민;석창성
    • 대한기계학회논문집A
    • /
    • 제36권8호
    • /
    • pp.889-895
    • /
    • 2012
  • 탄소섬유강화(CFRP) 복합재료는 높은 비강성과 비강도 특성을 갖고 있기 때문에 항공기, 자동차 등의 경량화가 요구되는 분야에서 금속재를 대체하여 사용 빈도가 급격히 증가하고 있다. 그 중 항공기의 경우, 동체가 고온 다습한 환경 조건에 노출되는 경우가 많기 때문에 CFRP를 이용한 항공기의 건전성 확보를 위하여 실제 환경에서의 강도 특성을 연구할 필요가 있다. 본 논문에서는 CFRP시험편을 $75^{\circ}C$의 물에 장기간 침지하였으며. 이 시험편을 이용해 침지 기간별로 인장강도를 평가하였다. 또한, SEM을 이용하여 흡습 기간에 따른 파단면의 파괴양상을 분석하였으며 300일간 침지된 시험편에 대해 응력비 R=0.1 조건으로 피로시험을 수행하여, 침지하지 않은 시험편에 비해 피로수명이 크게 저하되는 것을 확인하였다.

곡면형상의 알루미늄 하니콤/CFRP 샌드위치 패널에 관한 실험적 연구 (Experimental Testing of Curved Aluminum Honeycomb/CFRP Sandwich Panels)

  • 롸르네;박용빈;권진회;최진호
    • Composites Research
    • /
    • 제26권2호
    • /
    • pp.85-90
    • /
    • 2013
  • 본 논문에서는 탄소섬유강화플라스틱 면재와 알루미늄 샌드위치 심재를 가지는 복합재 샌드위치의 제조와 3절점 굽힘 실험에 대해 연구하였다. 시편은 3가지 하니컴 종류(3.18 mm, 4.76 mm, 6.35 mm의 셀 크기)와 3가지 곡률 반지름(평판, r = 1.6 m, r = 1.3 m)을 가지도록 제작하였다. 샌드위치 곡률의 기준은 W-방향을 기준으로 제작 하였다. CFRP $2{\times}2$ 트윌의 인장에서 기계적 물성치(탄성계수, 강도, 푸아송 비)를 측정하여 그 값들을 다른 CFRP 섬유 적층판의 값과 비교하였다. 실험결과 평판 샌드위치 패널의 3절점 굽힘 실험에서 심재의 전단강도는 공개된 데이터에 비해 11-30% 낮게 나왔다. 제한된 시편 크기에서 1.3미터 곡률을 가지는 패널은 평판 패널에 비해 심재의 극한 전단강도가 0.8-3.8% 감소한 것으로 나타났다.

CFRP 복합재 튜브의 압괴메카니즘에 관한 실험적 연구 (The Experimental Study on the Collapse Mechanism of CFRP Composite Tubes)

  • 김영남;차천석;양인영
    • 한국자동차공학회논문집
    • /
    • 제10권4호
    • /
    • pp.149-157
    • /
    • 2002
  • This paper is to investigate collapse mechanisms of CFRP(Carbon Fiber Reinforced Plastics)composite tubes and to evaluate collapse characteristics on the change of interlaiminar number and ply orientation angle of outer under static and impact axial compression loads. When a CFRP composite tube is crushed, static/impact energy is consumed by friction between the loading plate and the splayed fronds of the tube, by fracture of the fibers, matrix and their interface. These are associated with the energy absorption capability. In general, CFRP tube with 6 interlaminar number(C-type), absorbed more energy than other tubes(A, B, D-types). The maximum collapse load seemed to increase as the interlaminar number of such tubes increases. The collapse mode depended upon orientation angle of outer of CFRP tubes and loading status(static/impact). Typical collapse modes of CFRP tubes are wedge collapse mode, splaying collapse mode and fragmentation collapse mode. The wedge collapse mode was shown in case of CFRP tubes with 0° orientation angle of outer under static and impact loadings. The splaying collapse mode was shown in only case of CFRP tubes with 90°orientation angle of outer under static loadings, however in Impact tests those were collapsed in fragmentation mode .

경량 복합재 차체 구조의 역설계를 통한 복합재료 라미나 물성 산출 기법 연구 (A Study on Calculation of Composites Lamina Material Properties through Reverse Engineering of Light Weight Composite Car-body)

  • 문진범;김지훈;장홍규;박지상
    • 한국자동차공학회논문집
    • /
    • 제25권1호
    • /
    • pp.1-10
    • /
    • 2017
  • In reverse engineering, one of the main tasks is reconstructing the mechanical properties of used materials. For an isotropic material, it could be defined by a single tensile test using a coupon extracted from the structure. In contrast, CFRP composites require many tests and complex procedures to define all the material properties because CFRP is an orthotropic material and a stacked laminate. In this paper, the procedure to reconstruct composite material properties is studied by using the classical lamination theory and the test data of three different laminates from a composite structure. A sample reconstruction of composite material properties using a composite car body is introduced to verify the method.

정수압 조건에서 변형률 변화가 섬유강화 복합재의 층간분리인성에 미치는 영향에 대한 연구 (An investigation of the strain rate effect on the delamination toughness of fiber-reinforced composites in the hydrostatic pressure condition)

  • 하성록;이경엽;김현주;정동호
    • 한국정밀공학회지
    • /
    • 제22권11호
    • /
    • pp.99-103
    • /
    • 2005
  • It is generally accepted that fracture toughness of fiber-reinforced polymer composites is affected by strain rate in an atmospheric pressure condition. For a present study, the strain rate effect on the fracture toughness of fiber-reinforced laminated composites in the hydrostatic pressure condition was investigated. For this purpose, fracture tests have been conducted using graphite/epoxy laminated composites applying three steps of the strain rate at 270 MPa hydrostatic pressure condition. The strain rates applied were $0.05\%/sec,\;0.25\%/sec$, and $0.55\%/sec$. Fracture toughness was determined from the work factor approach as a function of applied strain rate. The result showed that fracture toughness decreased as the strain rate increased. Specifically, the fracture toughness decreased $12\%$ as the strain rate increased from $0.05\%/sec$ to $0.55\%/sec$.

공기결합 초음파탐상에 의한 CFRP 복합재의 흡습 특성 평가 (Characterization of Water Absorption by CFRP Using Air-Coupled Ultrasonic Testing)

  • 이주민;이주성;김용권;박익근
    • 비파괴검사학회지
    • /
    • 제34권2호
    • /
    • pp.155-164
    • /
    • 2014
  • 탄소섬유강화 복합재료(carbon fiber reinforced plastics; 이하 CFRP)는 금속재료에 비해 중량이 가벼우면서도 비강도와 비강성이 높은 재료로 항공기, 자동차, 선박 등의 다양한 분야에서 적용이 증가하고 있다. CFRP는 정적부하에 대해서는 우수한 역학적 특성을 가진 반면에 고온 다습한 환경에서는 우수한 역학적 특성을 기대할 수 없고, 복합재료의 유용한 기계적 성질이 장시간 주위 환경에 놓여 있어도 충분히 유지되어야 하지만 온도, 습도 등과 같은 환경적 요인으로 수분이 복합재료 내로 침투하여 기지의 분자 배열 및 화학적 성질을 변화시키고 복합재료의 계면 특성 및 구성 재질의 기계적 성질을 저하시킨다. 항공기의 경우 운항 시에 CFRP가 고온 다습한 환경조건에 장시간 노출되게 되면 CFRP 내부로 수분이 흡수되게 되는데 CFRP 내부에 흡수된 수분은 체적팽창을 야기시키고 내부 응력상태를 변화시킬 뿐만 아니라 섬유와 기지의 화학적 결합을 분리시킴으로써 접합강도를 급격히 저하시키게 된다. 따라서 CFRP를 사용하는 항공기의 구조 건전성 확보를 위하여 실제 환경에서의 특성 변화를 연구할 필요가 있다. 본 연구에서는 공기결합 초음파탐상검사(air coupled ultrasonic testing; 이하 ACUT) 시스템을 이용하여 흡습된 CFRP의 비파괴적 특성을 평가하고자 하였다. CFRP 시험편을 직접 제작한 후 고온다습한 환경을 설정하기 위해 항온수조를 이용하여 $75^{\circ}C$의 증류수에 30일, 60일, 120일간 침지하였고, ACUT를 이용하여 흡습에 의한 CFRP 시험편의 특성 변화를 초음파 C-scan 이미지와 흡습 전과 후의 신호의 전파시간 변화를 통해 초음파 신호 특성 변화를 고찰하였다. 또한 전단강도 평가를 통해 흡습에 의한 기계적 특성 변화를 실험적으로 검증하였다.

다중화된 FBG 센서와 error-outlier 알고리즘을 이용한 복합재 평판에 대한 충격위치탐지 (Impact localization on a composite plate using multiplexed FBG sensors and error-outlier algorithm)

  • 박성용;김상우;박상윤
    • 항공우주시스템공학회지
    • /
    • 제12권6호
    • /
    • pp.32-40
    • /
    • 2018
  • 본 연구에서는 error-outlier 기반의 충격위치탐지 알고리즘과 다중화된 FBG 센서를 이용하여 탄소섬유 강화 플라스틱 복합재 평판 구조물에 대한 충격위치탐지를 수행하였다. 알고리즘의 주요 변수인 오차 임계값(ET)이 0.3 nm, 상수 수준(CL)이 110일 때 최적의 충격위치탐지 결과(최대 오차= 31.82 mm, 평균 오차= 6.31 mm)가 도출되었다. 또한 주어진 최적의 변수 조건에서의 충격위치탐지 과정과 결과를 상세히 분석하였다. 본 연구에서 제시된 다중화된 FBG 센서와 error-outlier 기반의 충격탐지 알고리즘은 복합재 구조물에 대한 충격탐지에 적합한 것으로 판단되며, 향후 다양한 구조 건전성 감시에 활용될 것으로 기대된다.

Body Floor의 복합재 접합방식 및 경량화 설계에 관한 연구 (A Study on the Structural Design of Effective Composite Joint and Light Weight in Body Floor)

  • 김홍건;오상엽;김광철;김현우;곽이구
    • 한국생산제조학회지
    • /
    • 제21권6호
    • /
    • pp.920-925
    • /
    • 2012
  • A study of vehicle weight lightening has been progressed to reduce the fuel consumption. In this paper, the body floor in an EV (Electric Vehicle) bus has been applied by composites as CFRP and GFRP. In order to analyse a various reliability and safety, an experiment and FEM analysis was carried out to obtain weight lightening. Especially, the joint. An effective design is obtained through an experiment as well as FEM analysis. Results of stress analysis of GFRP material showed twice as much displacement than those of CFRP material. Among three kinds of joint methods, the bond joint method is occurred to a substantial shape change in the body and floor. It is found that the rivet joints are fairly suitable for stress sustaining capability.

CFRP 적층판의 동적 층간파괴인성의 평가법 (A Study on the Estimation of Dynamic Interlaminar Fracture Toughness on CFRP Laminates Plates)

  • 김지훈;김영남;판부직규;양인영
    • 한국자동차공학회논문집
    • /
    • 제6권2호
    • /
    • pp.80-91
    • /
    • 1998
  • In this paper, the estimation of dynamic interlaminar fracture toughness on fracture mode II in CFRP(carbon fiber reinforced plastics) laminates in made. Dynamic ENF(End Notched Flexure) apparatus used in this paper is manufactured by suing Split Hopkinson Pressure Bar. The static and impact load history in the CFRP specimen is measured by using manufactured dynamic ENF tester and 3-point bending test is carried out to find the load history. Also dynamic interlaminar fracture toughness can be found by using the J integral obrained from dynamic analysis in consideration of intertia-force effect.

  • PDF