• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1115-1124
• /
• 1996

An MCL(Molten Caustic Leaching) treatment is a chemical refinery process which is used for the desulfurization and demineralization by alkali treatment. The MCL treatment removes ash by converting mineral like Si, Fe, V, Ni etc. in petroleum cokes into soluble salts. The MCL has an advantage minimizing carbon loss in comparison to other desulfurization process. Reaction variables for the desulfurization and demineralization in the study were leaching temperature, leaching time, ratio of caustic to cokes, acid concentration and time for washing, and particle size. At the optimum condition, above 99% of desulfurization and about 90% of demineralization was obtained. FT-IR and SEM analysis showed that the structure and surface of the particle was closely related with the degree of sulfur and ash removal, and leaching temperature as well.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.129-135
• /
• 2016

CO oxidation was performed with Cu-Mn and Cu-Zn co-precipitated catalysts as differential precipitant, metal ratio and calcination temperature. The effects of differential metal mole ratio and calcination temperature in mixed metal oxide catalyst were investigated with CO oxidation reaction. Physiochemical properties were studied by XRD, $N_2$ sorption and SEM. 2Cu-1Mn with $Na_2CO_3$ catalyst calcined at $270^{\circ}C$ has a large surface area $43m^2/g$ and the best activity for CO oxidation. $Cu_{0.5}Mn_{2.5}O_4$ in XRD peak shows the lower activity than others. The catalytic activity over the catalyst calcined $270^{\circ}C$ displayed the highest conversion, and it was better activity comparing with Pt catalysts CO conversion.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.3
• /
• pp.71-81
• /
• 1999

A study on the undrained behavior of isotropically consolidated clay-sand mixtures was carried out using the automated triaxial testing apparatus. Overconsolidated ratio, effective mean pressure and clay content( up to 20% bentonite) were the factors varied in the experimental investigation. Undrained behavior(strength and pore water pressure generation during shear in triaxial loading) depends upon overconsolidation ratio, confining pressure and clay content. Significant changes in undrained compression characteristics occurred at around 20% of clay contents in the sand. The test results were analyzed and their behaviors were interpreted within the framework of plasticity constitutive model for clay-sand mixtures. Possible physical bases for the proposed forms are discussed. Validation of the applied model using the laboratory results is also given.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.351-355
• /
• 2014

Graphite electrodes are used for secondary batteries, fuel cells, and super capacitors. Research is underway to increased the reaction area of graphite electrodes used carbon nanotube (CNT) and porous carbon. CNT is limited to device utilization in order to used a metal catalyst by lack of surface area to improve. In contrast carbon nanowall (CNW) is chemically very stable. So this paper, microwave plasma enhanced chemical vapor deposition (PECVD) system was used to grow carbon nanowall (CNW) on Si substrate with methane ($CH_4$) and hydrogen ($H_2$) gases. To find the growth properties of CNW according to the reaction gas ratio, we have changed the methane to hydrogen gas ratios (4:1, 2:1, 1:2, and 1:4). The vertical and surficial conditions of the grown CNW according to the gas ratios were characterized by a field emission scanning electron microscopy (FE-SEM) and Raman spectroscopy measurements showed structure variations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.4
• /
• pp.423-427
• /
• 1992

During the cultivation of Penicillium verruculosum in the medium containing xylan as a sole carbon source for 26 days, xylanolytic activity and some changes were investigated. Protein content and xylanolytic activity, p-Nitrophenyl-$\beta$-D-xylopyranoside (PNPX), p-Nitrophenyl-$\beta$ -D-glucopyranoside (PNPG) hydrolytic activities were increased until 8 days but reducing sugar content was not correlated to protein content. When crude proteins from the culture broth were separated on SDS-PAGE, distribution of proteins was different from the culture broth of cellobiose octaacetate (COA) medium. The culture broth of xylan medium had high hydrolytic activity on xylan but not on cellulose. Furthermore, xylanolytic products were showed xylose, xylobiose and oligosaccharides on thin layer chromatography, and xylobiose was major product. Those result suggested that xylanolytic activity of culture broth was endo-type hydrolysis. Optimum temperatures of xylanolytic activity and PNPX hydrolytic activity of culture broth were 50~6$0^{\circ}C$ and 60~7$0^{\circ}C$, respectively and optimum pHs were 3.0~4.0 and 4.0~5.0, respectively.

• Journal of the Korean Chemical Society
• /
• v.41 no.2
• /
• pp.69-76
• /
• 1997

Kinetic studies for the nucleophilic substitution reactions of the benzoic anhydrides with anilines in methanol-acetonitrile mixtures at$35.0{\circ}C$have been carried out in order to elucidate the reaction mechanism. Individual rate constants$k_{XY}$and$k_{XZ}$were decided from the ratios of the reaction products for the competitive substitution reaction at either one of the two carbonyl carbons in benzoic anhydride. Transition state structure and reaction mechanism were elucidated by the Hammett$p_x,\;p_y$and$p_z$values and cross interaction constant$p_x\;p_y$and$p_zvalues. The reaction of the benzoic anhydride has been proposed to proceed by a frontside attack$S_N2 $mechanism with four-membered ring transition state from unusually large magnitude of the$ρ_X,\;ρ_{XY},\;ρ_{XZ}$and positive$p_Y$values.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.195-200
• /
• 2009

effluents to the environment. The activity of carbon-14, one of the radioactive effluents, in the environment is already high level and its effect on radiation exposure to the public and the environment is insignificant; thus, NPPs did not perform the carbon-14 monitoring in effluents in the past. By the way, effluents of noble gas and particulate radioactive materials originated from nuclear fuels has been continuously reduced due to both the advancement of manufacturing and integrity technology for nuclear fuels and the improvement of operation methods of NPPs. Futhermore, the portion of dose assessment by tritium and carbon-14 to the public has been relatively increased because the lower limit of detection for low-energy beta sources, such as tritium and carbon-14, is low due to the advancement of radiation detection technology. In this paper, the technical background for carbon-14 monitoring in nuclear facilities was investigated using United States technical reports and papers. This paper also reviews whether carbon-14 monitoring is necessary or not based on the investigated documents.

• Journal of Life Science
• /
• v.13 no.2
• /
• pp.214-222
• /
• 2003

The microorganism isolated from soil was identified as Bacillus coagulans by morphological and biochemical analyses and API-50CH/B kit, which was an identification kit for Bacillus species, and named as B. coagulans DL-1. It produced an extracellular biopolymer. Maximum production of biopolymer was 5.00 $\pm$0.15 g/$\ell$ in a $7\ell$bioreactor with an aeration rate of 1.0 vvm and an agitation speed of 500 rpm when concentrations of glucose and yeast as the optimal carbon and nitrogen sources were 2.0% (w/v) and 0.25% (w/v), which were optimized with a flask scale. Gas chromatographic analysis showed that the biopolymer producded by B. coagulans DL-1 consisted of glucose and rhanmose and their molar ratios was about 9 : 1. Its average molecular weight was 2.80$\times$$10^5$ with gel permeation chromatographic (GPC) analysis.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.51-55
• /
• 1998

After bottle culture of Pleurotus ostreatus, sawdust was taken out from the bottle and accumulated in the middle of March, and then composted. As the result, Y value was decreased rapidly 30 days after composting, and it was decreased slowly after 30 days. It is considered that 118 days is required for composting, however, it is possible to use for casing material after at least 48 days composting. The pH and total nitrogen content of sawdust based on composting period had tendency to increase as composting was processed. Total carbon and C/N rate had tendency to decrease as time went on. Based on the rate of 10, 30 and 50%, each sawdust was added to clay loam used as casing material for culturing A. bisporrus. Among various treatments, the mycelial growth of A. bisporus was more favorable in the treatment of 30% sawdust than in the single treatment of clay loam. Based on the date necessary for primodium formation of A. bisporus, the primodium formation in the treatment of 30% sawdust was reduced to about 5 days as compared with that of any other treatments When 30% sawdust was added to clay loam used as casing material for culturing A. bisporus, the yield of its fruiting body was increased to 28%.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.490-496
• /
• 2010

As sequencing technologies are steadily improving, massive sequence data have been accumulated in public databases. Thereby, programs based on various algorithms are developed to mine useful information, such as genes, operons and regulatory factors,from these sequences. However, despite its usefulness in a wide range of applications, comprehensive analyses of metagenome using these programs have some drawbacks, thereby yielding inaccurate or complex results. We here provide a possibility of signature sequences (cis-acting transcriptional and translational factors of metagenome) as a hallmark of ORFs finding from metagenome.