• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.5
• /
• pp.101-107
• /
• 2001

This paper deals with the free vibrations of horizontally curved beams with mu1tiple elastic springs. Taking into account the effects of rotatory Inertia and shear deformation. differential equations governing the free vibrations of such beams are derived, In which each e1astic spring is modeled as a discrete Winkler foundation with very short longitudinal length. Differential equations are solved numerically to calculate natural frequencies and mode shapes. In numerical examples, the circular, Parabolic. sinusoidal and elliptic curved beams are considered. The parametric studies are conducted and the lowest four frequency parameters are reported In tables and figures as the non-dimensional forms. Also the typical mode shapes are presented.

• Computational Structural Engineering
• /
• v.7 no.2
• /
• pp.77-87
• /
• 1994

Vibrational analysis of slab tracks for HSR(High Speed Rail) is performed in order to find dynamic characteristics and to control noise and vibration for the tracks. Wheel-rail interactive force is included in the analysis by modelling the vehicle and track as an unsprung mass and elastically-supported-double-beam respectively, and both are assumed to be connected by the Hertzian spring. From this study, it has been found that vibration in the track and the force transmitted to the infrastructure could be reduced by controlling elasticity, mass and stiffness of the track supporting system appropriately.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.299-300
• /
• 2022

구조물의 내진보강방법 중에서 가장 널리 이용되는 방법인 강재 이력형 감쇠장치는 수평하중에 대한 응력-변위 곡선을 이용하여 지진 에너지를 소산시키는 방법인데, 이 경우 편심하중 등에 의해서 부재가 면 외 방향으로 거동하여 응력-변위곡선이 불규칙하여 그 결과의 신뢰성이 떨어지는 경우가 있다. 이러한 형상을 방지하기 위해서는 별도의 채널(Channel)을 시공하는 불편함을 감수해야 하며, 또한 수평력이 반복적으로 작용할 때 그 효과를 장담할 수 없는 문제점이 있다. 본 연구에서는 강재 스트립과 스프링을 결합한 댐퍼를 고안하여 스프링은 탄성변형을, 강재 스트립은 소성변형을 받게 하는 혼합형 댐퍼를 개발하고자한다. 여기서, 스프링은 복원력으로 작용하여 반복하중에 대한 저항성을 키우고 강재 스트립의 하중변위 곡선을 규칙적으로 하는 역할을 수행하게 되며 에너지 소산량을 계산할 때 편리함과 정확도를 높이고자 한다. 강재 스트립의 폭과 길이는 일정하지만 두께를 변화시켜서 5종류를 선택하였으며, 댐퍼 1개당 3개의 스트립을 정삼각형 형태로 배치하고 그 중심에 상당한 강성을 갖는 스프링을 갖는 형태로 제작하였다. 댐퍼 시험체는 5개를 제작한 후, 이 댐퍼를 구조물에 배치하였을 때의 지진에 대한 에너지 소산량과 부재력을 검토하여 댐퍼의 안전성(Safety)를 검증하고자 한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.249-249
• /
• 1998

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.275-275
• /
• 1999

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.1
• /
• pp.6-11
• /
• 2019

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.31-36
• /
• 2014

This paper shows the feasibility of using carbon-fiber-reinforced polymer (CFRP) composite materials for manufacturing automotive coil springs. For achieving weight reduction by replacing steel with composite materials, it is essential to optimize the material parameters and design variables of the coil spring. First, the shear modulus of a CFRP beam model, which has $45^{\circ}$ ply angles for maximum torsional stiffness, was calculated and compared with the test results. The diameter of the composite spring was predicted to be 17.5 mm for ensuring a spring rate equal to that when using steel material. Finally, a finite element model of the composite coil spring with $45^{\circ}$ ply angles and 17.5 mm wire diameter was constructed and analyzed for obtaining the static spring rate, which was then compared with experimental results.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.301-317
• /
• 2017

In this study, as an initial study for development of stability analysis program of a double-deck tunnel during life cycle, a structural analysis solver based beam-spring model for the double-deck tunnel is constructed. Effect of parameters(slab supporting type, depth of the tunnel and ground elastic modulus) is analyzed with the beam-spring model. The model is also compared and verified by commercial structural analysis program. It is considered that the slab supporting type affects the integrated behavior with segment lining and influence of intermediate slab on the stability of the tunnel decreases as the tunnel depth increases. The relationship between the ground elastic modulus and the effect of the intermediate slab on the segment lining needs further investigation.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.9
• /
• pp.73-79
• /
• 2023

This paper describes a level of detail (LOD) based bending spring structure and damping technique that can reliably represent strain-based dynamics (SBD) on a triangular mesh. SBD models elastic energy using strain instead of energy based on the edge length of a triangular mesh. However, when a large external force occurs, the process of calculating the elastic energy based on edges results in a degenerate triangle, which stretches in the wrong direction because it calculates an unstable strain. In this paper, we introduce an LOD-based bending spring generation and energy calculation method that can efficiently handle this problem. As a result, the technique proposed in this paper can reliably and efficiently handle SBD based on bending springs, which can provide a stable representation of cloth simulation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.23-29
• /
• 1997

유한요소법을 이용하여 경수로형 핵연료집합체에서 냉각수 유동에 의한 수직 상승력으로부터 핵연료를 지지하는 판형 HDS의 강성도를 수치해석적으로 평가할 수 있는 방법을 제안하였다 I-DEAS code의 8 node brick element를 사용하고 판스프링들간의 간섭 부위에 접촉요소를 사용한 유한요소 모델링 및 해석기법으로 평가한 탄성강성도가 변형 에너지법에 근거하여 유도된 탄성강성도 평가식으로부터 얻은 결과와 잘 일치하고 있어서 제안된 유한요소 모델링 및 해석기법은 판형 HDS의 거동 분석에 유용하게 이용될 수 있다.