• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.269-272
• /
• 2002

창원시 북면과 대산면 강변 여과 취수 지역에서의 탄성파 조사를 통한 충적 대수층의 특성 규명은, 탄성파 조사가 충적 대수층의 수리지질학적 정보를 획득하는데 매우 유용한 방법임을 보여주었다. 특히 굴절법 탐사는 충적층 지하수위 추정에 뚜렷한 효과가 있음을 보여주었으며, 고해상도 반사법 탐사의 경우도 퇴적 구조를 잘 반영하는 것으로 나타났다. 조사된 지역의 지하수위는 하천수위에 비해 약 2m 이상 높은 것으로 나타났으며, 이는 조사된 시기의 지하수가 하천 방향으로 거동하고 있음을 시사한다. 하천 방향의 지하수위 최대 경사는 약 2/100 였으며, 실제 전반적인 조사 지역내의 충적층 지하수위 수두 경사는 이보다 작은 값일 것으로 사료된다. 또한 점토 및 실트질 지층이 조사 지역에 협재하고 있으나 이들의 수평적인 연속성은 한계가 있어 대표적인 대수층인 자갈 혼재층이 부분적으로만 피압 상태에 있을 것으로 판단된다. 한편, 햄머 진원을 이용한 고해상도 반사법 탐사의 경우, 약 40m 전후 심도의 충적층 하부 기반암의 상부를 뚜렷하게 보여주기에는 한계가 있다고 판단되며, P파의 속도와 주파수 문제로 인한 수직 해상력의 한계는 S파 등을 활용한 조사를 통해 보완할 필요가 있다고 사료된다

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.615-621
• /
• 2007

Seismic refraction survey which is assumed to be effective for investigating of the amount of bed sediment was applied to two sites having different soil types. The ten lines of seismic surveys were carried out in the areas of the levee near the Wolchon Bridge, Yongin and the Damam levee, Yecheon. At the same time, two borehole data were obtained to be used in classifying geological formations on the inverted seismic sections. As the results of interpolating the depths of geological formations and the surface elevation values, it is possible to estimate the volume of the bed sediments at $24,000m^3\;and\;56,000m^3$ in Yongin and Yecheon, respectively.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.123-127
• /
• 2005

Surface refraction and crosswell seismic survey conducted as a part of geoscientific studies applied in an area of ground water reservoir shows that, 1) the average velocity with respect to depth is about 250 m/s for the surface layer (<4m), 2,500 m/s for the weathered formation, and greater than 3,500 m/s for the bed rocks, 2) the depth to the bedrock derived from the seismic studies and the sonic log (17m) is somewhat different from the depth obtained from the core study (25m).

• Geophysics and Geophysical Exploration
• /
• v.5 no.3
• /
• pp.178-184
• /
• 2002

For economy and convenience, seismic refraction survey is widely used in surveying for large civil engineering work. The purpose of this study is to obtain the numerical responses of various models using Kirchhoff migration, and to analyze its application to the real data processing. Synthetic traveltime curve was calculated by vidale's algorithm, and various models such as 2 or 3 layer model and irregular topography model are tested to simulate the response of real structure. In order to compare the effect of initial velocity model, true velocity models, inversion results by tomography, smooth velocity models are used as an initial guess. The responses of model data show that the algorithm of this study is more sensitive to initial velocity model than the reflection survey, so choosing a suitable initial velocity model will be the most important thing in real data processing.

• Journal of the Korean Geophysical Society
• /
• v.5 no.4
• /
• pp.329-336
• /
• 2002

Electrical resistivity dipole-dipole, seismic refraction, and seismic reflection methods were performed to delineate the boundaries the Yongdong basin(Cretaceous) in terms of physical properties and to ultimately identify the margin architectures of the faults or unconformities. Higer resistivities (approximately >2000 ohm-m) most likely originate from the basement of the basin, contrasting with the lower resistivities from infilled sedimentary rocks. Faults at the eastern margin and unconformities at the western boundary are characterized as high-slope($70^{\circ}$) and gentle-slope($30^{\circ}$) gradients in the resistivity sections, respectively Such features for the boundaries are also suggested by the lower values of seismic velocity and resistivity for the western margin.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.230-242
• /
• 2017

Seismic velocities measured from in-situ tests (n=177) and through rock core samples (n=1,035) are reviewed in light of construction standards, widely used standards as a first-hand approximation of rock classification solely based on seismic velocities. In-situ down hole tests and refraction survey for soft rocks showed seismic velocities of 1,400~2,900 m/s which is faster than those specified in construction standards. For moderate~ hard rocks, in-situ down hole tests and refraction survey showed 2,300~3,800 m/s which roughly corresponds with the range specified in the construction standards. A similar trend is also observed for seismic velocities measured from rock core samples. The observed differences between construction standards and seismic velocities can be explained in two ways. If construction standards are correct the observed differences may be explained with seismic velocities affected by underlying fast velocities and also possibly with selection of intact cores for velocity measurement. Alternatively, construction standards may have intrinsic problems, namely artificial discrete boundaries between soft rocks and moderate rocks, application of foreign standards without consideration of geologic setting and lack of independent verification steps. Therefore, we suggest a carefully designed verification studies from a test site. We also suggest that care must be exercised when applying construction standards for the interpretation and accessment of rock mass properties.

• Economic and Environmental Geology
• /
• v.38 no.6 s.175
• /
• pp.623-631
• /
• 2005

We applied the seismic method to investigate the site characteristics around the Circular Pond (top diameter 7.3 m, bottom diameter 3 m, and depth 4.78 m) at the Ssangsujung Park within the Gongsansung in Gongju. Previous excavations for the cultural assets beneath the Ssangsujung Park disclosed the assumed site of the Palace of the Beakje Dynasty and the Circular Pond containing the Bakje relics. We demonstrated that the seismic prospecting can be applicable to delineate the underground structure around the cultural properties by the three kinds of seismic approaches: walk-away test, conventional refraction method, and equal-distance refraction survey. The last method which is designed by this work ran detect the I-W variations of seismic velocity in the subsurface medium across the Circular Pond on the basis of the difference of the P-wave arrival times between the 1-m-spacing 24 geophones and the corresponding 24 shots parallel with the geophone profile. From the combined results, prominent three-layer velocity structure is observed around the Circular Pond. The bottom layer is interpreted as the basement rock which is exposed near the Ssangsujung whereas the upper layer with relatively lower velocities is interpreted to be the artificial covering. The basement depth beneath the Circular Pond is deeper than the norhern area. The western basement of Circular Pond has the thicker weaker layer compared with the eastern part. Thus, the middle layer could be constructed as the artificial foundation during the Beakje Dynasty. Consequently, the Kong-sansung Circular Pond is possibly built upwardly rather than digging.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1996.10a
• /
• pp.203-208
• /
• 1996

• Journal of the Korean Geophysical Society
• /
• v.4 no.2
• /
• pp.113-120
• /
• 2001

The discrete wavelet transform(DWT) has potential as a tool for supplying discriminatory attributes with which to distinguish seismic events. The wavelet transform has the great advantage over the Fourier transform in being able to localize changes. In this study, a discrete wavelet transform is applied to seismic traces for identifying seismic events and picking of arrival times for first breaks and S-wave arrivals. The precise determination of arrival times can greatly improve the quality of a number of geophysical studies, such as velocity analysis, refraction seismic survey, seismic tomography, down-hole and cross-hole survey, and sonic logging, etc. provide precise determination of seismic velocities. Tests for picking of P- and S- wave arrival times with the wavelet transform method is conducted with synthetic seismic traces which have or do not have noises. The results show that this picking algorithm can be successfully applied to noisy traces. The first arrival can be precisely determined with the field data, too.

• The Journal of Engineering Geology
• /
• v.11 no.2
• /
• pp.163-174
• /
• 2001

For quantitative evaluation of geotechnical engineering properties such as rippability and diggability, clear interpretation on the subsUJiace velocity structures should be preceded by figuring out top soil, weathered and soft rock layers, shape of basement, fracture zones, geologic boundary and etC. from the seismic refraction data. It is very important to set up suitable field parameters, which are the configuration of profile and its length, spacings of geophones and sources and topographic conditions, for increasing field data Quality. Geophone spacing of 3 to 5m is reconunended in the land slope area of house land development site. In refraction tomography technique, the number of source points should be more than a Cluarter of available channel number of instrument and the subsurface structure interpretation can be decreased the artifact of inversion by topographic effect. Compared with core logging data, it is shown that the velocity range of the soil is less than 700m/s, weathered rock 700~1,200m/s, soft rock 1,200~1,800m/s on the velocity tomogram section. And the upper limit of P-wave velocity for rippability is estimated 1,200 to 1,800m/s in land slope area of gneiss.