Abstract
For quantitative evaluation of geotechnical engineering properties such as rippability and diggability, clear interpretation on the subsUJiace velocity structures should be preceded by figuring out top soil, weathered and soft rock layers, shape of basement, fracture zones, geologic boundary and etC. from the seismic refraction data. It is very important to set up suitable field parameters, which are the configuration of profile and its length, spacings of geophones and sources and topographic conditions, for increasing field data Quality. Geophone spacing of 3 to 5m is reconunended in the land slope area of house land development site. In refraction tomography technique, the number of source points should be more than a Cluarter of available channel number of instrument and the subsurface structure interpretation can be decreased the artifact of inversion by topographic effect. Compared with core logging data, it is shown that the velocity range of the soil is less than 700m/s, weathered rock 700~1,200m/s, soft rock 1,200~1,800m/s on the velocity tomogram section. And the upper limit of P-wave velocity for rippability is estimated 1,200 to 1,800m/s in land slope area of gneiss.
탄성파 굴절법 탐사를 이용한 지반조사시 탐사 결과로부터 표토층 및 풍화대 깊이, 연암 또는 기반암의 심도, 단층 파쇄대나 연약지반의 위치 및 규모, 지질경계 등을 파악, 지하 속도분포를 도출함으로서 Rippability 등 지반 공학적 특성의 정량적 평가가 가능하다. 이를 위하여는 양질의 자료 취득은 물론 조사 목적과 탐사심도에 맞는 측선길이 및 배치, 수진점과 진원점 감격 및 배치, 지형기복 여부 등 현장조사 파라미터의 설정이 중요하다. 택지개발 지역의 절토 사면부에서는 수진점 간격을 3∼5m 정도가 적합하며 측선의 배열은 주측선과 주요 지점에서 이에 사교하는 부측선 배치가 필요하다. 굴절법 토모그라피 해석기법의 적용시, 조사장비의 가용 채널 수에 1/4 이상의 진원점으로부터 자료를 취득해야 지하구조 해석시 지형의 영향에 의한 왜곡현상을 감소시킬 수 있다. 편마암 지대인 절토사면부에서 시추자료와 비교하여 탄성파 속도 토모그램에 의한 지반분류는 토사 700 m/s 이하, 풍화암 700∼1,200m/s, 연암 1,200∼1,800m/s 이고 굴삭난이도(리퍼빌리티)는 리핑암 700∼1,200m/s, 발파암 1,800m/s 이상으로 나타났다.