• 제목/요약/키워드: 타 캐비테이션

검색결과 25건 처리시간 0.024초

Reynolds수, 표면거칠기 및 공기함유량이 모형프로펠러 캐비테이션 성능에 미치는 영향 (Effect of Reynolds Number, Leading Edge Roughness and Air Content on the Cavitation Performance of Model Propellers)

  • 김기섭;김경열;안종우;이진태
    • 대한조선학회논문집
    • /
    • 제37권1호
    • /
    • pp.10-25
    • /
    • 2000
  • 모형 프로펠러 날개의 레이놀즈 수와 날개 앞날 표면거칠기 그리고 터널용수의 공기함유량이 모형 프로펠러의 캐비테이션 초기 발생, 캐비테이션 발생량 및 변동압력에 미치는 영향을 캐비테이션 터널에서 실험적으로 조사하였다. 'Sydney Express' 컨테이너선의 모형 프로펠러 캐비테이션 관찰과 변동압력 계측결과를 타 연구기관의 모형실험 결과와 실선 프로펠러의 캐비테이션 관찰 및 변동압력 계측치와 함께 비교하였다. 그 결과 매우 타당한 결과를 보여주었다.

  • PDF

타 간극 캐비테이션과 저감장치에 관한 2 차원 모형 실험 (Two-dimensional Model Tests for Rudder Gap Cavitation and Suppression Devices)

  • 이창민;오정근;이신형
    • 대한조선학회논문집
    • /
    • 제47권2호
    • /
    • pp.122-131
    • /
    • 2010
  • The increasing size and speed of cargo ships result in high speed flow in propeller slipstream, and thereby cavitation is frequently observed on and around a rudder system. Rudder gap cavitation is the most difficult one to control and suppress among various types of the cavitation on a rudder system. In the present study, experiments of the incipient cavitation and pressure measurement were carried out for typical cargo ship rudder sections with and without the suppression devices, which were suggested by the authors. Fundamental understanding of the rudder gap cavitation inception was obtained along with its relevance to the surface pressure distribution. It is confirmed that the gap flow blocking devices effectively suppress the rudder gap cavitation and, at the same time, augment lift.

선미 후류에서 작동하는 혼타의 압력분포에 관한 연구 (A Study on the Pressure Distributions of Horn Rudder Operating in Ship's Wake)

  • 공도성;한재문;유재문
    • 대한조선학회논문집
    • /
    • 제39권2호
    • /
    • pp.1-10
    • /
    • 2002
  • 선체-프로펠러-타의 상호작용 해석을 반복계산에 의해 수행하였다. 계측된 공칭속도를 입력자료로 하고 보오텍스 링 이론을 이용하여 유효속도를 계산함으로써 선체와 프로펠러사이의 상호작용을 고려하였고, 계산된 유효속도를 입력자료로 하여 프로펠러-타 상호작용을 계산할 수 있는 포텐셜 기저 패널법을 개발하였다. 프로펠러에 의해 타에 유기되는 속도와 반대로 타에 의해 프로펠러에 유기되는 속도는 수렴된 해가 얻어질 때까지 반복 계산하여 타 주위의 정상유동 해석을 수행하였다. 이와 함께 삼성중공업의 대형 캐비테이션 터널에서 L.D.V를 사용하여 프로펠러 및 타 주위의 유동장을 계측하였고 수치계산 결과와 비교하였다. 실선에 설치되고 있는 혼 타주위의 유동장 계산을 위해 gap flow 모델을 적용하였고, 여러 가지 타각에 대한 수치계산을 수행하여 대형캐비테이션 터널에서 계측된 타 표면에서의 압력과 비교하였으며, 계산된 표면 압력 치는 실험 값과 비교적 일치되는 만족스러운 결과를 얻었다.

초대형 컨테이너선박 방향타의 캐비테이션 수치계산 및 검증 (Numerical Calculation and Validation for Rudder Cavitation of a Large Container Ship)

  • 김건도;문일성;김경열;반석호;이창섭
    • 대한조선학회논문집
    • /
    • 제43권5호
    • /
    • pp.568-577
    • /
    • 2006
  • With the increase of ship size and speed, the loading on the propeller is increasing, which in turn increases the rotational speed in the propeller slipstream. The rudder placed in the propeller slip stream is therefore subject to severe cavitation with the increased angle of attack due to the increased rotational induction speed of the propeller. In the present paper the surface panel method, which has been proved useful in predicting the sheet cavitation on the propeller blade, is applied to solve the cavity boundary value problem on the rudder. The problem is then solved numerically by discretizing the rudder and cavity surface elements of the quadrilateral panels with constant strengths of sources and dipoles. The strengths of the singularities are determined satisfying the boundary conditions on the rudder and cavity surfaces. The extent of the cavity, which is unknown a priori, is determined by iterative procedure. Series of numerical experiments are performed increasing the degree of complexity of the rudder geometry and oncoming flows from the simple hydrofoil case to the real rudder in the circumferentially averaged propeller slipstream. Numerical results are presented with experimental results.

함정의 평판형 방향타 캐비테이션 침식에 대한 모형 시험 연구 (Study on the Model Tests of Cavitation Erosion Occurring in Navy Ship's Flat-Type Rudder)

  • 백부근;안종우;박영하;;송재열;고윤호
    • 대한조선학회논문집
    • /
    • 제60권1호
    • /
    • pp.31-37
    • /
    • 2023
  • In the present study, a method of performing cavitation erosion test directly on the anodized surface of the rudder model is proposed, not applying ink or paint on its surface. An image processing technique is newly developed to quantitatively evaluate the erosion damages on the rudder model surface after erosion test. The preprocessing saturation image, image smoothing, adaptive hysteresis thresholding and eroded area detection algorithms are in the image processing program. The rudder cavitation erosion tests are conducted in the rudder deflection angle range of 0° to -4°, which is used to maintain a straight course at the highest speed of the targeted navy ship. In the case of the conventional flat-type full-spade rudder currently being used in the target ship, surface erosion can occur on the model rudder surface in the above rudder deflection angle range. The bubble type of cavitation occurs on rudder surface, which is estimated to be the main reason of erosion damage on the rudder surface.

2차원 날개단면의 앞날 형상 변화에 따른 캐비테이션 특성 연구 (Influence of the Leading Edge Shape of a 2-Dimensional hydrofoil on Cavitation Characteristics)

  • 송인행;안종우;문일성;김기섭
    • 대한조선학회논문집
    • /
    • 제37권1호
    • /
    • pp.60-66
    • /
    • 2000
  • 고속 프로펠러를 대상으로 캐비테이션 발생 특성에 가장 큰 영향을 미치는 2차원 날개단면의 앞날 형상에 관한 연구를 수행하였다. 앞날 주위의 유동장을 해석하기 위하여 비압축성 RANS(Reynolds Averaged Navier-Stokes)방정식을 유한체적법(FVM)으로 차분하는 수치해석기법을 사용하였다. 또한 패널법을 이용하여 캐비테이션 발생두께를 예측하였다. 예측된 결과들은 실험결과와 비교해서 타당함을 알 수 있었으며, 이 결과를 이용하여 새로운 단면을 설계하였다.

  • PDF

LCT에서 방향타 동력계를 이용한 평판 및 비틀림 방향타 특성의 실험적 연구 (Experimental Study of the Flat & Twisted Rudder Characteristics Using Rudder Dynamometer in LCT)

  • 안종우;백부근;박영하;설한신
    • 대한조선학회논문집
    • /
    • 제58권6호
    • /
    • pp.391-399
    • /
    • 2021
  • In order to investigate force and cavitation characteristics for the flat & twisted rudders in the Large Cavitation Tunnel (LCT), the rudder dynamometer was designed and manufactured. The measuring capacities of lift, drag and moment are ±1000 N, ±2000 N, and ±150 N-m, respectively. The present dynamometer uses the actuator with a harmonic drive to control the rudder angle without backlash. As the target ship is a military ship with twin shaft, each dynamometer was installed above the port & starboard rudders. After the installation of the model ship with all appendages, the model test composed of rudder force measurement and cavitation observation was conducted for the existing flat rudder & the designed twisted rudder. While the flat rudder showed the big difference of lift & moment between port & starboard, the twisted rudder presented a similar trend. The cavitation of the twisted rudder showed better characteristics than that of the flat rudder. Another set of model tests were conducted to investigate rudder performance by the change of the design propeller. There was little difference in rudder performance for the design propellers with slight geometric change. Through the model test, the characteristics of the flat & twisted rudders were grasped. On the basis of the present study, it is thought that the rudder with better performance would be developed.

후처리된 아크 용사코팅 층의 전기화학적 및 캐비테이션 손상 특성 (Characteristics of Electrochemical and Cavitation Damage after Sealing Treatment for Arc Thermal Sprayed Coating Layer)

  • 김성종;한민수;박일초
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2014년도 추계학술대회 논문집
    • /
    • pp.300-300
    • /
    • 2014
  • 해양환경 하에서 대형 강구조물의 경우 장기간 부식손상을 방지하기 위해 아크 용사코팅 기술이 오래전부터 유용하게 이용되어 왔다. 아크 용사코팅 기술은 타 용사코팅 기술에 비해 경제성과 생산성이 뛰어나 대형 강구조물에 적용되고 있다. 용사재료로는 Al, Zn 또는 그 합금들이 주로 사용되어 강재에 대해 희생양극 방식효과를 나타낸다. 그러나 아크용사에 의해 적층된 코팅 층은 용사공정 중 불가피하게 수많은 기공과 산화물이 포함되어 내식성 및 내구성에 악영향을 미치게 된다. 따라서 본 연구에서는 알루미늄 합금의 용사코팅 층에 대하여 다양한 후처리를 통해 내식성과 더불어 내구성을 향상시키고자 하였다. 용사코팅은 알루미늄 합금 선재(1.6 ${\varnothing}$)를 사용하여 아크용사를 실시하였다. 용사 시 용사거리는 200 mm, 공기압력은 약 $7kg/cm^2$ 정도로 유지하면서 용사코팅을 실시하여 약 $200{\mu}m$ 두께로 코팅 층을 형성시켰다. 이후 용사코팅 층의 표면에 다양한 후처리재를 적용하였으며, 내구성을 평가하기 위하여 후처리 적용 전후 시험편에 대하여 캐비테이션 실험을 실시하였다. 캐비테이션 실험은 ASTM G32-92에 의거하여 주파수 20 kHz의 초음파 진동 장치(ultrasonic vibratory device)를 사용하였다. 그리고 시험편 표면과 발진 혼에 부착된 팁(tip)과의 거리는 1 mm로 일정하게 유지시킨 뒤, 캐비테이션 발생 시간을 변수로 하여 실험을 실시하였다. 손상된 용사코팅 층의 표면은 주사전자현미경과 광학현미경으로 관찰하였으며, 시험편 손상깊이는 3D 현미경으로 비교 분석하였다. 또한 캐비테이션 실험 전후의 무게를 측정하여 무게 감소량을 상호 비교하였다. 그리고 전기화학적 실험은 천연해수 속에서 자체 제작한 홀더(holder)를 이용하여 $0.33183cm^2$의 용사코팅 층만을 노출시켜 실시하였다. 그리고 기준전극은 은/염화은 전극을, 대극은 백금전극을 사용하였다. 분극실험을 통해 후처리 적용에 따른 용사코팅 층의 부식전위 및 부식전류밀도를 비교 평가하였다. 그 결과, 용사코팅 층에 의하여 강재에 대한 희생양극 방식전위가 확보되었으며, 후처리재가 적용된 용사코팅 층에서 내식성 및 캐비테이션 저항성이 향상되었다.

  • PDF

혼-타의 간극 캐비테이션 침식 저감을 위한 실험적 연구 (An Experimental Research on Gap Cavitation Erosion of Semi-spade Rudder)

  • 김성표;박제준;김용수;장영훈;최영복;백부근
    • 대한조선학회논문집
    • /
    • 제43권5호
    • /
    • pp.578-585
    • /
    • 2006
  • Cavitation related erosion damages on semi-spade rudder generally occur at around leading edge of lower-face and behind gap of lower pintle. To get the idea of gap entrance profile for the latter case, a series of tests with large models has been carried out at MOERI. In the tests, the flow pattern around lower pintle have been investigated and visualized by high speed camera. Additionally, cavitation inception tests and pressure measurements have also been conducted for better comparison. As a result a new model (F rudder) has been developed. The new model turned out to have stable pressure distribution along the surface and so the cavitation inception speeds within ${\pm}5^{\circ}$ of rudder angle were delayed approx. 4 knots in average.

프로펠러 및 선미반류에 의해 영향을 받는 혼-타의 캐비테이션 관찰 및 간극 유동에 대한 가시화 연구 (Cavitation Observation and Visualization of the Gap Flows on a Rudder Influenced by Propeller Slipstream and Hull Wakes)

  • 백부근;김경열;안종우;박선호;허재경;유병석
    • 대한조선학회논문집
    • /
    • 제45권3호
    • /
    • pp.238-246
    • /
    • 2008
  • In the present study, the influences on the gap cavitaiton of the semi-spade rudder are investigated experimentally in the condition with propeller and hull wakes. To reduce the scale effect in the given experimental conditions, 1/28.5-scale-down models of propeller and rudder are manufactured. We have the propeller rotate ahead of the rudder, inducing the three dimensional effects originated from the propeller action. Experimental methods are composed of the cavitation observation using high speed camera, PIV (particle image velocimetry) measurements to visualize the cavitaition and flows around the gap. The propeller slipstream affects both of the gap flows and cavitation of the rudder.