• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.25-30
• /
• 2014

The flow characteristics of two types of overhung compressor volutes for automobile turbochargers were analyzed numerically using commercial software. For obtaining high performance from a volute, it is necessary that the volute have a high pressure recovery coefficient and a low loss coefficient. We investigated the flow characteristics of two types of overhung compressor volutes with a fixed diffuser inlet angle of $24^{\circ}$ and a mass flow rate of 0.055 kg/s. The first type is a volute with one-arc cross section (type 1) and the second type is with three-arc cross section (type 2). Our results showed that between the two types of volutes, type 2 had the higher pressure recovery coefficient and the lower loss coefficient along the entire angular position.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.3
• /
• pp.295-303
• /
• 2014

Purpose: This study aims to observe bleaching resulted from multipurpose contact lens solutions used to manage lenses with the subjects of colored contact lenses being distributed in Korea. Methods: The lenses have been worn for six months, and their refraction is 0.00D. Three types of colored contact lenses of which margin has been colored with a different manufacturing method have been adopted (type 1: pigment application method, type 2: chemical bonding process, type 3: sandwich method), and multipurpose solutions used were two types containing different components. Each of the colored contact lenses was stored in the multipurpose solutions for 20 days and went through vortexing for 15 seconds per day. Their fluorescence absorbance, surface roughness, brightness index, and color coordinate index were measured before and after the vortexing to see the degree of bleaching. Results: In the two types of multipurpose solutions, every type of the color contact lenses showed no statistically significant difference in their fluorescence absorbance value before and after the vortexing. Regarding surface image, the front surface of the lenses was smooth in every type, and about the back surface, type 3 indicated less protrusion than type 1 and 2. About the difference of color on the lens surface before and after the vortexing, type 3 showed significantly less difference than type 1 and 2; however, all fell into the permissible error. Conclusions: About the bleaching of colored contact lenses resulted from multipurpose solutions for soft contact lenses, there was no difference observed in terms of fluorescence absorbance and color. According to the methods of manufacturing dyes, however, there was difference in the protrusion of the posterior surface image.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.44.2-44.2
• /
• 2009

본 제품 개발 사례는 날로 사용자가 증가되는 Touch Phone의 감성 디자인을 위한 선행 감성 평가 프로토타입으로 활용하고자 하였다. 본 감성 프로토타입은 Touch Phone에 근접한 형태로 디자인 했으며, 기본적인 평가에 필요한 프로그램을 개발하여 적용하였다. 특히, 본 감성 프로토타입은 다양한 Touch Phone의 GUI 및 Graphic Motion에 대한 감성에 대한 평가를 PC환경에서 수행할 수 있도록 Dual Monitor 환경으로 개발하였으며, 차세대 Touch Phone UI의 화두인 Multi-Touch를 위한 10개의Multi-Touch가 가능한 터치패널을 적용하였다. 이에 본 개발 사례를 활용 함으로써, Touch Phone의 다양한 감성적인 Motion 알고리즘 및 연구 및 평가검증이 PC환경에서 Touch Phone과 동일한 사용환경으로 평가하고 실험할 수 있는 환경의 구축이 가능하다.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.2
• /
• pp.151-156
• /
• 2001

We describe a new representation for learning concepts that differs from the traditional decision tree and rule induction algorithms. Our algorithm PROLEARN learns one or more prototype per class and follows instance based classification with them. Prototype here differs from psychological term in that we can have more than one prototype per concept and also differs from other instance based algorithms since the prototype is a "ficticious ideal example". We show that PROLEARN is as good as the traditional machine learning algorithms but much move stable than them in an environment that has noise or changing training set, what we call 'stability’.tability’.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.174-179
• /
• 2009

We consider the stabilization problem for a class of networked control systems with neutral type of time delays. The neutral type of time-delays occur in controller-to-actuator and sensor-to-controller. The Takagi-Sugeno (T-S) fuzzy model is employed to represent a nonlinear system with neutral type of time-delays. The stabilization via state-feedback is first addressed, and delay-range-dependent stabilization conditions are proposed in terms of linear matrix inequalities (LMIs). Finally, an application example will be given to show the merits and design a procedure of the proposed approach.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.39-44
• /
• 2021

In this paper, two types of BPF(Band Pass Filter) which are hair-pin and interdigital have been designed for millimeter-wave application using two types of material which are LCP(Liquid Crystal Polymer) and PTFE(Polytetrafluoroethylene) and also, their performances such as bandwidth, insertion loss, and in-band flatness are compared. The proposed BPF are designed as third-order filters, and their pass band is from 26.5 GHz to 27.3 GHz. Interdigital BPF using PTFE substrate has most wide -3 dB S21 bandwidth of 7.8 GHz and hair-pin BPF using LCP substrate has most narrow -3 dB S21 bandwidth among the proposed four BPF. For in-band insertion loss, hair-pin BPF using PTFE substrate achieves low insertion loss better than -0.667 dB, and hair-pin BPF using LCP substrate exhibits relatively high insertion loss among the proposed four BPF better than -0.937 dB. However, the maximum difference in insertion loss performance among the proposed four BPF is 0.27 dB, which is too small to negligible. For in-band flatness, interdigital BPF using PTFE substrate shows greatest performance of 0.017 dB, and hair-pin BPF using LCP substrate exhibits the lowest performance of 0.07 dB. There are tiny difference in in-band flatness performance of 0.053 dB. As a results, it is considered that the BPF using LCP substrate can derive the performances similar to that of the BPF using PTFE substrate in Millimeter-wave band.

• Journal of Power System Engineering
• /
• v.16 no.5
• /
• pp.5-12
• /
• 2012

희박예혼합기의 급속연소에 관한 연구를 위하여 2-실린더 가솔린 엔진을 부실 타입의 압축천연가스(CNG) 분사 엔진으로 개조하였다. 본 연구에서는 부실의 최적설계에 관심을 두고 두 종류의 부실을 적용하여 실험을 실시하였고, 부실의 체적과 홀 개수는 1.5cc와 6개로 각각 동일하게 하고, 홀 직경을 0.8mm 및 1.1mm로 달리하였다. CNG연료는 포트연료분사(Port fuel injection; PFI)와 부실분사(Sub-chamber injection; SCI)에 의해 엔진에 독립적으로 공급되고, 그 실험결과로 구한 연소압력, 평균유효압력(IMEP), 질량연소분율과 사이클변동계수(COV) 등을 서로 비교하였다. 본 연구의 대표적 실험연구결과로서 PFI 타입의 엔진연소특성은 희박예혼합기의 경우를 제외하고 모든 조건에 있어서 기존의 가솔린 엔진과 비슷하였고, SCI 타입의 엔진연소특성으로 평균유효압력은 부실 내에 불완전 예혼합기형성으로 PFI 타입보다 낮았으며, COV는 SCI 타입이 희박가연한계가 확대됨으로 인하여, 특히 높은 공기과잉률 범위에서 PFI 타입과 비교해 보다 좋은 결과를 나타내었다.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2003

Dynamic dan loading and class linking of Java is a poweful mechanism. Many other system also support some form of dynamic loading and linking, but lazy loading, type-safe linkage, user-definable class loading policy, and multiple namespaces are important features of Java The ue U dan loading is assured of type safety. The security of Java greatly depends on type safety. In JVM, type safety mechanism is very difficult and access of accuracy is not dear, so type safety problems were raised. In paper, n analysis simple Java code and present a diagram graph and an operational semantics for dynamic class loading and type safety.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.1 s.343
• /
• pp.45-58
• /
• 2006

In H/W implementation for the finite field, the use of normal basis has several advantages, especially, the optimal normal basis is the most efficient to H/W implementation in $GF(2^m)$. In this paper, we propose a new, simpler, parallel multiplier over $GF(2^m)$ having a Gaussian normal basis of type k, which performs multiplication over $GF(2^m)$ in the extension field $GF(2^{mk})$ containing a type-I optimal normal basis. For k=2,4,6 the time and area complexity of the proposed multiplier is the same as tha of the best known Reyhani-Masoleh and Hasan multiplier

• Journal of Korean Library and Information Science Society
• /
• v.47 no.1
• /
• pp.175-198
• /
• 2016

This study intends to implement a OPAC prototype for digital kids. To the end, this study applies prototyping techniques that design, evaluate and improve an early sample model. Included in this study are as follows: (1) design a conceptual model of new OPACs based on the information need analysis of digital kids, (2) implement a OPAC prototype with WordPress 4.2 version, (3) evaluate the prototype OPAC from the viewpoint of digital kids and children librarians, and finally, (4) suggest the improved model and implementational strategies for kid's OPAC. 6 fourth and fifth graders in the elementary school and 5 children librarians in public libraries participate in the final evaluation process.