• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.75-91
• /
• 2015

This study aims to assess the competitiveness of 30 logistics centers that operate in the hinterland of the North Container Port at Busan New Port. Thirty-two key factors were selected from previous studies to analyze and improve competitiveness and expand business opportunities in the hinterland. Suggestions from logistics experts were also canvassed. These variables were then put through first- and second-factor analysis to verify validity and measure confidence levels; they were later categorized into five factors and 15 sub-factors impacting on competitiveness. The categorized factors were compared using the analytic hierarchy process (AHP) to assess the importance of each factor and sub-factor in the case of logistics centers in the North Container hinterland of Busan New Port. The findings indicate that factors related to the securing of significant amounts of container cargoes were of greater importance. On the other hand, relatively basic factors proved to be less important in improving the competitiveness of the port hinterland.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.233-236
• /
• 2008

In the traditional way floors has been constructed there are no shear connectors between the concrete slab and timber joists. In this study, an existing floor system os improved by simply providing normal bolts or lag screw so that the composite action can be achieved. It is evident that the key elements in the composite beam are the shear connectors. The selection of these connectors was based on their shear capacity. The experimental study carried out in this research investigated the flexural behavior of composite beams. The experimental studies of composite beams showed that the ultimated load capacity of the proposed composite beam(LS-S10 specimen) is 1.29 times as high as the noncomposite one. Finally, it can be concluded that LS-S10 specimen consisting structural laminated timber beam and concrete slab can be significantly improved by providing appropriate shear connectors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.26-26
• /
• 2020

하천수의 수심을 유지하기 위하여 설치된 콘크리트 취수보 대신 강자갈이나 쇄석을 채움재로 하는 돌망태를 사용하게 되면 토사퇴적으로 인한 건천화나 상, 하류 수생태계 단절과 같은 문제를 어느 정도 감소시킬 수 있을 뿐만 아니라, 자갈접촉산화작용에 의한 수질개선과 공사비 절감 효과 등의 장점이 있다. 그러나 돌망태는 투수성이므로 불투수성인 콘크리트 보다 저류측면에서 불리하다. 콘크리트 취수보에서의 흐름은 보 정점의 형상, 보의 폭, 높이, 그리고 월류수심에 좌우되며, 베르누이 방정식과 연속방정식에 의해 방류량 산정식을 유도하고, 유량계수와 같은 실험상수를 결정하여 방류량을 계산한다. 돌망태 취수보의 흐름은 보의 높이, 보의 길이, 보의 상류수심 외에 채움재의 형상, 입경, 배치상태가 흐름에 영향을 미친다. 따라서 콘크리트 취수보에 적용되었던 기존의 방류량 산정식을 그대로 적용할 수 없다. 돌망태 보의 통과류는 실험상수가 포함된 비선형 수두손실방정식으로 표현할 수 있다. 실험상수는 비표면적의 크기를 의미하는 채움재의 평균동수반경와 관계되며, 평균동수반경은 채움재 입자의 형상으로 부터 구할 수 있다. 따라서 실험을 통하여 채움재 입자의 형상과 크기에 따른 실험상수와 평균동수반경의 관계를 구하면 비선형 수두손실방정식으로부터 통과류의 방류량을 계산할 수 있게 된다. 본 연구는 돌망태 취수보가 대수층함양 원수 공급시설물로서 타당한가를 평가하기 위하여 수행되었다. 콘크리트 취수보의 월류량 계산은 기존의 방류량 산정식을 이용하였으며, 돌망태 취수보는 실험상수와 평균동수반경의 기존관계식을 이용하여 통과류의 방류량을 계산하였다. 이와 같이 계산된 각각의 수심-방류량 관계로 부터 수심을 비교하였다. 동일한 유량조건에서 돌망태 취수보의 상류수심은 콘크리트 취수보보다 작게 계산되었다. 상류수심은 돌망태 채움재 입자의 크기가 작을수록 증가하여, 돌망태 취수보는 채움재의 입자크기가 작을수록 저류성능이 개선됨을 알 수 있었다. 따라서 돌망태 취수보는 채움재의 입경이 작을수록 콘크리트 취수보의 저류수준에 접근할 수 있을 것으로 판단되었다.

• Journal of agricultural medicine and community health
• /
• v.36 no.1
• /
• pp.36-46
• /
• 2011

Objectives: To investigate the experience and competence of physicians providing emergency medical services at public health sub-centers on remote Korean islands. Methods: This study enrolled 79 doctors who work at public health sub-centers on remote Korean islands. Data were collected in December 2009 via self-administered e-mail questionnaires. The response rate was 44.3%. Results: Emergent situations occurred at most (58.68%) of the public health sub-centers that were surveyed in December 2009. An average of 1.92 cases required treatment by public health physicians. Only 20.25% of the physicians were specialists in emergency medicine, while the remainder were general practitioners (GPs) without clinical experience as emergency doctors. We also found that the physicians we surveyed had insufficient knowledge of emergency medical care. At some health centers only one doctor was available, and there was no medical team in holiday, although most of the physicians indicated that the ideal number of doctors per center was two or three. In cases of emergency, patients were often sent to the mainland by ship without receiving first-aid treatment. The public health sub-centers lacked the necessary medical equipment to save lives in emergencies and lacked escort systems for emergency patients. Conclusions: The Korean government should address the importance of providing emergency care in remote areas. Health administrators should provide suitable manpower, medical equipment, guidelines for emergency medicine, and education for public health physicians on remote islands.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.11-19
• /
• 2014

The Construction industry is a labor-intensive industry that its labor cost takes up about 30~40% out of the whole construction cost. However, due to a stereotype that on-site work is a 3D job there is a shortage of the labor forces. Modular construction method is to produce modular units in the plant so that workers could work stably. Also, after delivering the module from plant to the site, there will be only installment to be required that shortens construction duration. Even though the modular market is currently expanding based on military facilities in Korea, its best strengths are not demonstrated well which are shortened construction period and low cost. It also causes labor problem of production due to minimum utilization of the modular construction method. Multi-skilled labor means a technician that is able to perform more than two kinds of work with more than two techniques. Multi-skilled labor can proceed smoothly by figuring out the connectivity between the precedent and following operations. Therefore, this research is to apply the concept of Multi-skilled labors, suggest solutions and allocate manpowers efficiently. As a result, it helps to decrease idle manpowers during the operation and the total labor forces can be saved. Low cost is the original strength of the modular which can stand out so the modular market is expected to expand.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5218-5228
• /
• 2012

The aim of this study is to classify the social network types among elderly people with dementia, and to examine the relationship of network type to quality of life. This is to identify influence of social network on quality of life of elderly people with dementia. And the study seeks to identify the differences of quality of life among types of social network. The data of 222 elderly people used in this study were collected from the health center and elderly people with dementia living in the community. The interview was conducted from July 17 to August 31 in 2012 using a structured questionnaire. Descriptive statistics, one way ANOVA, multiple regression analysis and also cluster analysis with the SPSS 18.0 program were used to analyze the data. As a results, three network types were classified.:(1) inactive isolated, (2) active independent (3) inactive dependent networks. Respondents in the different network type are found to have different degrees of quality of life. Respondents inactive independent network is reported to have the highest quality of life, while those with inactive isolated network are the lowest. The results of the study suggest that the classification of network types allows consideration of the interpersonal environments of elderly people with dementia. The relative effects on quality of life for elderly people with dementia, evident in the current analysis, are the case in point. Therefore Social service programs should focus on different groups based on social network type.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.877-886
• /
• 2019

The size of the subway entrance should be calculated according to the user's demand, but Korea has the same size for each entrance by applying a uniform value. Recently, the installation of mobile convenience facilities such as escalators, elevators, etc. is mandated by the traffic weakness promotion law, but it is inconvenient to use the existing stations because it is mainly arranged in the place where it can be installed regardless of user demand. This study aims to establish a model for estimating the size of mobile convenience facilities by predicting the use demand of each station entrance so that the location and size of mobile facilities can be reflected in the design or construction of the station. To this end, a multiple regression model was established to forecast daily demand by utilizing the demand for getting on and off by station and the building association area for each purpose around the railway station. The actual data of Dongdaemun and Jonggak Stations were used to verify the estimated model. In addition, the escalator installation scale was compared / analyzed by doorway using domestic and overseas escalator equations. As a result, it was more accurate to estimate the usage demand for a single station. Also, Jonggak Station has an up and down escalator installed at exit 1, but it was analyzed that it is appropriate to install at exit 4. This study is an advanced form of the essay model for estimating the users of the entrance and exit users of urban railway stations published in 2018. In addition, it seems to be the basis of the current escalator installation criteria.

• Journal of KIBIM
• /
• v.1 no.2
• /
• pp.19-23
• /
• 2011

The planning stage of an architectural project has much more significant effects on the cost or outcome of the project than other stages of the project. In addition, the importance of architectural planning has been further increasing according to the recent trend of construction projects becoming larger in scale and more complex. In spite of this, the current situation is that the planning stage work is not being systematically managed. Accordingly, the purpose of this study was to develop a BIM-based simulation system for providing support during architectural planning stage such as spatial planning & review, cost review, project owner requirements management, etc. It is easy to review various alternatives using this system that allows not only the modeling of space object modeling but also the instantaneous review of spatial area & layout, cost, etc. based on object information. In addition, it can be used as a communication tool with the project owner as it provides the visualized information and quantitative data of the building model, and the information created through this system can be delivered to the following stage for usage. It is thought that using this system, the entire project work including the architectural planning stage can be supported and even contributing to the advancement of architectural process.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.674-682
• /
• 2020

Recently, the problem of air pollution has become a global concern due to industrialization and overcrowding. Air pollution can cause various adverse effects on human health, among which respiratory diseases such as asthma, which have been of interest in this study, can be directly affected. Previous studies have used clinical data to identify how air pollutant affect diseases such as asthma based on relatively small samples. This is high likely to result in inconsistent results for each collection samples, and has significant limitations in that research is difficult for anyone other than the medical profession. In this study, the main focus was on predicting the actual asthmatic occurrence, based on data on the atmospheric environment data released by the government and the frequency of asthma outbreaks. First of all, this study verified the significant effects of each air pollutant with a time lag on the outbreak of asthma through the time-lag Pearson Correlation Coefficient. Second, train data built on the basis of verification results are utilized in Deep Learning algorithms, and models optimized for predicting the asthmatic occurrence are designed. The average error rate of the model was about 11.86%, indicating superior performance compared to other machine learning-based algorithms. The proposed model can be used for efficiency in the national insurance system and health budget management, and can also provide efficiency in the deployment and supply of medical personnel in hospitals. And it can also contribute to the promotion of national health through early warning of the risk of outbreak by atmospheric environment for chronic asthma patients.

• Journal of Science and Technology Studies
• /
• v.14 no.1
• /
• pp.3-33
• /
• 2014

Over the last forty years, the dominant perspective of social science on medicine has been the medicalization theory. It indicates the social process of expanding power of medical professionals by (re)defining the problems which were treated as non-medical phenomena(e.g. homosexuality, alcoholism, obesity, etc.) into "diseases" and thus the spheres of medical intervention. Meanwhile, rapid technoscientific changes in the medical field owing to the diffusion of biological sciences and information technologies since the mid-1980s and the accompanying emergence of new social arrangements such as bioeconomy and biological citizenship have led to the rise of a new social scientific perspective called the biomedicalization theory. This paper attempts to compare the two theories and assess their merits and demerits as a basic work to deepen the understandings of sociology and STS on contemporary medicine. And it also attempts to analyze their relative relevance through the case of mental disorder. The analysis on the case of mental disorder clearly shows that the medicalization in that area seems to have continuously proceeded since the early 19th centiry to the present. Furthermore, it also seems true that the five central processes of biomedicalization(except for risk surveillance technologies of mental disorder) have been observed and realized since the late 20th century. These results indicate that although medicalization has consistently proceeded, it has not been limited to the quantitative expansion of the medical field but been extended to the qualitative transformation asserted by the biomedicalization theory. Therefore, while the concept of medicalization is valid and significant even today, we can recognize that the concept of biomedicalization allow us to capture the new phenomena which cannot be properly and sufficiently captured by that of medicalization.