• 대한교통학회지
• /
• 제27권1호
• /
• pp.43-51
• /
• 2009

이 논문은 타이어-노면간 마찰계수(drag factor)와 노면에 발생된 스키드마크를 통해 제동직전 속도(pre-braking speed) 산정을 정확하게 하기 위한 방법론을 제시하고자 한다. 제동직전 속도(pre-braking speed)와 활주직전 속도(pre-skidding speed)간 어떠한 상관관계가 있는지 판단하기 위해 실차 주행 및 제동실험을 통해 데이터가 수집되었다. 두 대의 차량에 fifth wheel(오륜) 장비, 스피드건, vericom 2000 등 다양한 측정장비를 탑재하여 제동실험이 수행되었으며, 자동차 속도, 제동거리, 활주거리, 감속도 등이 정밀 측정되었다. 실험자료의 분석을 통해 노면 마찰계수값과 활주직전 속도를 산정하고, 이후 활주직전 속도와 제동직전 속도를 비교하여 이들간의 상관관계를 규명하였다. 결과적으로 산정된 마찰계수값은 현재 일반적으로 적용되고 있는 0.8보다 높았으며, 제동직전 속도는 활주직전 속도보다 $5{\sim}10km/h$ 정도 높은 것으로 나타났다. 향후에는 다양한 차종과 노면조건에 대한 후속실험을 통해 더욱 정교한 한국형 분석모형의 개발과 실무적용이 필요할 것으로 판단된다.

• 대한기계학회논문집A
• /
• 제41권7호
• /
• pp.585-590
• /
• 2017

주행중인 차량의 거동은 지면과 타이어의 접촉면에 발생하는 힘과 토크에 의해 결정된다. 타이어에 작용하는 힘과 토크를 계산하기 위하여 다양한 타이어 모델들이 사용되고 있으며, 본 연구에서 사용하는 브러쉬 모델(brush model)은 타이어의 물리적 특성을 이용하여 지면과의 접촉면에 발생하는 힘과 토크를 구하는 모델이다. 브러쉬 모델은 힘과 토크를 계산하는데 다른 타이어 모델에 비하여 적은 수의 계수를 필요로 하지만, 힘과 토크를 계산하는데 낮은 자유도를 가지기 때문에 시험 데이터를 정확하게 표현하는데 한계가 있다. 본 논문에서는 이러한 단점을 개선하기 위하여 타이어 마찰계수 및 특성계수에 최소한의 변수를 추가한 개선된 모델을 제안하고, 이의 유효성을 검증하였다.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.310-318
• /
• 2016

The demands for vehicle safety systems such as ABS and ESC have been increased. Accurate vehicle state estimation is required to realized the abovementioned systems and tire-friction coefficient is crucial information. Estimation of lateral tire-road friction coefficient using pneumatic trail information is mainly dealt in this paper. Pneumatic trail shows unique characteristics according to the wheel side slip angle and these property is highly sensitive to vehicle lateral motion. The proposed algorithm minimizes the use of conventional tire models such as magic formula, brushed tire model and Dugoff tire model. The pure side slip maneuver, which means no longitudinal dynamics, is assumed to achieve the ultimate goal of this paper. A simulation verification using Carsim and Simulink is performed and the results show the feasibility of the proposed algorithms.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.517-523
• /
• 2004

Recently, wheel slip controllers with controlling the wheel slip directly has been studied using the brake-by-wire actuator. The wheel slip controller is able to control the braking force more accurately and can be adapted to various different vehicles more easily than the conventional ABS systems. The wheel slip controller requires the information about the tire braking force and road condition in order to achieve the control performance. In this paper, the tire braking forces are estimated considering the variation of the friction between brake pad and disk due to aging of the brake, moisture on the contact area or heating. In addition, the road friction coefficient is estimated without using tire models. The estimated performance of tire braking forces and the road friction coefficient is evaluated in simulations.

• 자동차안전학회지
• /
• 제5권2호
• /
• pp.17-23
• /
• 2013

This paper describes an algorithm for Advanced Emergency Braking(AEB) with tire-road friction coefficient estimation. The AEB is a system to avoid a collision or mitigate a collision impact by decelerating the car automatically when forward collision is imminent. Typical AEB system is operated by Time-to-collision(TTC), which considers only relative velocity and clearance from control vehicle to preceding vehicle. AEB operation by TTC has a limit that tire-road friction coefficient is not considered. In this paper, Tire-road friction coefficient is also considered to achieve more safe operation of AEB. Interacting Multiple Model method(IMM) is used for Tire-road friction coefficient estimation. The AEB algorithm consists of friction coefficient estimator and upper level controller and lower level controller. The numerical simulation has been conducted to demonstrate the control performance of the proposed AEB algorithm. The simulation study has been conducted with a closed-loop driver-controller-vehicle system using using MATLAB-Simulink software and CarSim Vehicle model.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.25-32
• /
• 2013

차량이 곡선도로를 선회함에 있어 차량 내부적 요소인 차량의 진입속도, 차량에 작용하는 횡가속도, 전복과 관련된 롤 각, 그리고 외부적 요소인 노면과 타이어와의 마찰 및 도로의 구조는 중요한 요소이다. 본 연구에서는 교통사고 재현을 위한 PC-Crash프로그램을 이용하여 차량의 진입속도와 도로의 편경사, 노면상태에 따른 마찰계수를 변수로 두어 선회 시 차량의 상태변화를 분석하였다. 그 결과로, 곡선도로 선회시 한계속도 설정에 관해 도로구조와 노면상태에 따른 마찰계수가 중요한 요소가 된다는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제24권7호
• /
• pp.106-111
• /
• 2007

In this paper, the transient brake time was studied on the van type vehicle with accelerometer. Experiments were carried out on the asphalt(new and polished), unpacked road(earth and gravel) and on wet or dry road conditions. The transient brake time is not effected bzy the vehicle speed. The transient brake time is about 0.41$\sim$0.43second on the asphalt road surface and the error range is within 0.1$\sim$0.16second. For the asphalt road condition, the transient brake time is not effected by both new asphalt road surface and the polished asphalt road surface. With compared by dry and wet road surface condition, the transient brake time of wet condition is longer than dry road condition and compared with unpacked road condition and packed road condition, unpacked road condition is shorter than packed road condition. It is considered that the transient brake time is effected by the road surface fraction coefficient. In other words, the transients brake time increases as friction coefficient decreases.

• 한국자동차공학회논문집
• /
• 제24권5호
• /
• pp.512-519
• /
• 2016

In this study, the tire road friction estimation(TRFE) algorithm for controlling the rear wheel driving force of a 4WD vehicle during acceleration is developed using a standard sensor in an ordinary 4WD passenger car and a speed sensor. The algorithm is constructed for the wheel shaft torque, longitudinal tire force, vertical tire force and maximum tire road friction estimation. The estimation results of shaft torque and tire force were validated using a torque sensor and wheel force transducer. In the algorithm, the current road friction is defined as the proportion calculated between longitudinal and vertical tire force. Slip slop methods using current road friction and slip ratio are applied to estimate the road friction coefficient. Based on this study's results, the traction performance, fuel consumption and drive shaft strength performance of a 4WD vehicle are improved by applying the tire road friction estimation algorithm.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.52-59
• /
• 2008

Most accident reconstruction or analysis depend on the coefficient of friction to estimate the vehicle speeds. Skid mark and coefficient of friction are usually utilized to calculate the velocity and behavior of vehicles. For a critical case such as traffic accident reconstruction, however, the initial velocity of the car should be calculated precisely. In this paper, emergency brake tests on ABS and Non-ABS brake system are conducted on the dry pavement asphalt road on speed 40, 60, 80 and 100 km/h respectively. The SWIFT sensor was established in the front wheel and rear wheel at driver side to measure the forces, moments and speeds of revolution of the tires. These tests results can be available to brake tests and accident reconstruction.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.109-114
• /
• 2007

Skid mark and coefficient of friction are usually utilized to calculate the velocity and behavior of vehicles. For a critical case such as traffic accident reconstruction, however, the initial velocity of the car should be calculated precisely. In this study, the skid marks on dry asphalt pavement were measured, and the velocity at brake onset was precisely recovered. A passenger car with new tires and non-contact optical speedometer were set up for the tests. A new methodology to determine the more precise velocity for Non-ABS vehicle at braking onset were suggested.