• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.412-416
• /
• 2017

CMOS device에서 off leakage current로 인한 power dissipation 문제는 미래 소자에 주어진 주요한 과제이다. Nanowire FET은 이러한 문제를 해결할 주요 미래소자로 각광받고있다. 하지만 nanowire FET을 공정할 때 채널 에칭을 완벽한 원형 구조로 가지는 것이 어렵기 때문에 타원형으로 시뮬레이션을 진행해 볼 필요성이 있다. 본 논문에서는 nanowire의 aspect ratio, crystal orientation의 변화에 따른 nanowire FET의 전압-전류 특성 및 transport 특성을 관찰하는 연구를 진행하였다. 시뮬레이션 결과, [100] 방향은 완벽한 원형구조에서 최적인 반면에 [110] 방향은 타원형으로 모델링함에 있어서 장점이 있는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1057-1062
• /
• 1991

본 연구에서는 형상을 미소하게 변화시켜 좌굴을 방지할 수 있는 최적 도움형 상을 설계하였고 타원형, 토리-구형도움의 가장 얕은 형태의 최적도움형상도 설계하였] 으며, 실제 적용예를 수치로 제시하였다. 또한 수압(hydrostatic pressure)을 받는 수조(reservoir)의 도움형상에 대해서도 직경 및 길이 변화에 따른 형상설계 결과를 제시하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.38-38
• /
• 2003

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.325-333
• /
• 2012

An experimental study was carried out to determine the correlation between the internal flow in a circular nozzle and elliptical nozzles with the external flow. The flow rate, spray angle and drop size were measured under various conditions of the injection pressure. Numerical simulations were attempted to investigate the internal flow structure in the elliptical nozzles, because the experimental study was limited in its measurements of flow velocity and pressure distributions in the relatively small orifice. In the case of the elliptical nozzles, the disintegration characteristics of the liquid jet were significantly different from those of the circular nozzle. Surface breakup was observed at the jet issued from the elliptical nozzles with injection pressure. This is due to the internal flow structure, which is reattached to the orifice wall at the minor axis plane of the elliptical nozzle, unlike that observed with the circular nozzle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.205-209
• /
• 2017

Unlike spherical drop impact, ellipsoidal drop impact can control the bouncing height on a heated surface by significantly altering impact behavior. To scrutinize the effect of the aspect ratio (AR) of the drop on the bounce suppression, in this study, non-axisymmetric spreading behaviors are observed from two side views and characterized based on the spreading width of the drop for horizontal principal axes. In addition, the maximum spreading width is investigated for various ARs. The results show that as the AR increases, the maximum spreading width of the minor axis increases, whereas that of the major axis shows no significant variation. In the regime of high AR and high impact velocity, liquid fragmentations by three parts are observed during bouncing. These fragmentations are discussed in this work. The hydrodynamic features of ellipsoidal drop impact will help understand bouncing control on non-wetting surfaces for several applications, such as self-cleaning and spray cooling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.817-824
• /
• 2016

In this paper, a modified elliptical lens antenna design is proposed to improve the performance of 100 GHz mini-lens antennas used in the ECEI(Electron Cyclotron Emission Imaging) module at KSTAR. A hemispherical lens is added on the bottom plate of the conventional elliptic lens antenna, and a 100 GHz dipole antenna is located on the end point of the hemispherical lens. Using geometrical optics, antenna radiated EM fields are designed to be totally reflected from the inner surface of the hemispherical lens, and thereby the antenna patterns are more focused toward the main beam. The validity of the proposed design is confirmed by the 3D EM simulator. The modified elliptical lens antenna provides 23.8 dB maximum gain, which is 2.2 dB gain improvement as compared with the conventional elliptic lens. Also, the side love levels of E- and H-planes are decreased by 2.6 dB and 3.4 dB, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.941-948
• /
• 2017

Recently, hydrogen energy has been in the spotlight as an alternative to diminishing fossil fuels and as a potential solution to environmental pollution. The development of hydrogen-fueled vehicles and the demands for improved fuel efficiencies have resulted in the need to increase the volume of the hydrogen pressure vessels. Pressure vessels having an elliptical bottom, as opposed to one that is hemispherical, allow for a greater capacity. However, there are insufficient studies on the feasibility of the forming process required for an elliptical bottom. In this study, the liner capacity is calculated according to the ratios of the major to the minor axes of the elliptical bottom part in a hydrogen pressure vessel. Structural safety is verified through finite element analyses, and the results are compared to the theoretical results. The feasibility of the proposed elliptical shape of the pressure vessel bottom, while filled to maximum capacity, is validated through forming analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.1-8
• /
• 2005

This paper explored the effects of separation control through the use of pulsating jet blowing on a two dimensional elliptical airfoil. To develop an active control technique of flow separation, a flow control actuator utilizing continuous/pulsed jet of pressurized air was designed and installed in a wind tunnel testing model of elliptic wing. PIV measurement and flow visualization of the wing near field were conducted to access the feasibility and effectiveness of the pulsed jet blowing on controlling the stall of the elliptical wing in subsonic flow. PIV experimental results show that separation control can provide significant reduction in turbulent flow wake and separation bubbles by jet blowing. The pulsating jet blowing is more effective on the separation control than continuous one. Increased jet frequency suppressed the turbulent separated flow wake effectively at even higher AOAs.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.1
• /
• pp.21-24
• /
• 1995

Vitamin contents in three different types of the fruits and seeds of Rosa davurica Pall. were determined to examine their applicability for a new health food products as well as medical supplies. HPLC analysis of the fruits showed that circular(L) type fruits contained the highest ascorbic acid (AA) concentration (911mg/1000g). Elliptical and circular(S) type fruits contained a little less amounts of AA, their concentrations being 358mg/l00g and 344mg/100g, respectively. Spectrophotometric analysis of total ${\beta}-carotene$ contents in the fruits showed a similar amount of ${\beta}-carotene$ in elliptical (286mg/100g) and circular(L) (208mg/100g) type fruits, but a far less amount was shown in the circular(S) type fruits (24 mg/100g).

• Applied Microscopy
• /
• v.34 no.2
• /
• pp.131-137
• /
• 2004

This study is observed the skin of the parrot fish, Oplegnathus fasciatus that related study of epidermal alternation with environmental and physiological change. It composed of supporting cells, unicellular glands and accessory cells. The supporting cells are classified into superficial cell, intermediated cell and basal cell. Superficial cell of epidermal layer is squamous or cuboidal and contain nucleus of ovoid type. And its free surface has many microridge which covered with glycocalyx. Intermediated cell is ovoid and has a nucleus of round shape. Basal cell is columnar, and nucleus is situated in the upper cytoplasm. Gland cells are classified into mucous cell and club cell. By the histochemical studies of the epidermal secretions the mucous materials react on blue in ABPAS (pH 2.5). Club cell is observed numerous vacuoles and microfilaments in the cytoplasm. The cytoplasm of chloride cells are occupied with numerous mitochondria. Pigment cells are classified into two type. The one contain pigment granules of electron dense, and the other contain reflecting platelets.