• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.731-734
• /
• 1997

In this study, a shape optimization is performed for circular and elliptical holes to reduce weight of a plate. It is accomplished in reference to the results of topology optimization of the square plate with circular hole. From the results. it is concluded that the stress values of shape optimization of them are satisfied with 100MPa of constraint condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.757-760
• /
• 2002

In this study, 3 kinds of holes (square, circular and elliptic holes) are attempted on a cantilever to reduce the weight by 30%. Maximum Von-Mises stresses of cantilever plate with 3 kinds of holes are investigated. For the elliptic holes, a shape optimization is attempted to fad the optimum angle of axis by rotating the axis by $10^{\circ}\; from\; 50^{\circ}\; to\; 120^{\circ}\;$ From the results, it is known that the maximum stress is decreased to 0.868 MPa by rotation of the axis of elliptic hole and 0.26 MPa is decreased compared with the maximum stress occurred on the circular hole.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.68-77
• /
• 2013

This report is based on the investigation of potholes which are formed by fluvial erosion. A pothole is called so because it is a hole that looks like a coffeepot. The results of previous studies are applied to the 'Jakgwaecheon Porthole' of this study. The study is focused on the dimension and morphology of the Pothole and investigates the effects of stream sediments, river flow, geological structural lines, etc. on the formation of potholes. As a result of measuring 61 potholes in this area, we recognized that the elliptical dish-shaped cross sections are dominant and inferred that their longitudinal direction on the plain is affected by the direction of the stream flow. Also, 'Jakgwaecheon Pothole' is very characterized in terms of scale and morphology. Furthermore, it is harmonious with the beautiful landscape, humanity, and historical values and it can be suggested that it is qualified to be registered as a geoheritage structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.4
• /
• pp.337-342
• /
• 2016

A spudcan is mounted on the lower leg of the jack-up rig, a device for preventing a rollover of a structure and to support the structure in a stable sea floor. At the time of inserting the surface of the spud can to penetrate when the sand layer is stable and smoothly pulled to the clay layer, and at that time of recovery when uploading the spud can is equipped with a water injection device. In this study, it is significant to optimize the shape of pipelines holes for water injection device and it was set in two kinds of shape, the oval and round. Interpretation of the subject into the site of Gulf of Mexico offshore Wind Turbine Installation Vessels (WTIV) was chosen as a target platform. Using the ANSYS Workbench commercial programs, optimal design was conducted. The results of this study can be applied to the hole-shaped design of various marine structures.

• Journal of the Korean Vacuum Society
• /
• v.22 no.5
• /
• pp.262-269
• /
• 2013

Though focused ion beam (FIB) is one of the candidates to fabricate the nanoscale patterns, precision milling of nanoscale structures is not straightforward. Thus this poses challenges for novice FIB users. Optimal determination in FIB parameters is a crucial step to fabricate a desired nanoscale pattern. There are two main FIB parameters to consider, beam current (beam size) and dose (beam duration) for optimizing the milling condition. After fixing the dose, the proper beam current can be chosen considering both total milling time and resolution of the pattern. Then, using the chosen beam current, the metal nano hole structure can be perforated to the required depth by varying the dose. In this experiment, we found the adequate condition of $0.1nC/{\mu}m^2$ dose at 1 pA Ga ion beam current for 100 nm thickness perforation. With this condition, we perforated the periodic square array of elliptical nano holes.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2013

This study aims to provide fundamental data for further shape-factor research on karst by measuring and classifying the shape of surface topography in Hogye, Mungyeong. First, in the research area, there are 35 dolines and uvalas. Second, large uvalas are found in three places, including Gulnomjae in Bugokri, and Teotgol and Denjimigol in Urori. Third, there are 13 round dolines and 22 oval dolines. Next examining the cross section of dolines, there are 27 bowl shaped dolines, 2 plate shaped dolines, and 6 funnel shaped dolines. Fourth, most dolines lay over 200m elevation, which is ridge and top of mountain. Fifth, development direction of dolines resembles the strike direction of limestone in Hogye, suggesting that the development direction of limestone affects doline corrosion. From this situation, we can guess sinkholes of the doline would be linked with limestone caves by the underground water pipe. Three limestone caves, karren and dry valley etc. appear in the research area.