• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.805-814
• /
• 1999

In this paper, elliptic function bandpass filters using ceramic coaxial resonators are designed. Since elliptic function filters have better performance of frequency selectivity than those based on Butterworth or Chebyshev, therefore it is possible to make better use of limited frequency resources. Elliptic function bandpass filters using ceramic coaxial resonators are designed for reducing it's size, weight, cost and for easy manufacturing and tuning. From measurements, an accurate resonator model is obtained and the coupling coefficient values are extracted. Based on these results, elliptic function bandpass filters are designed. The experimental results have shown that the 8th order elliptic function filter of 959 MHz center frequency with 28 MHz bandwidth using coaxial ceramic resonators have about more tan 17 dB return loss, 5 dB insertion loss, more than 20 dB attenuation at $f_c\pm$5 MHz.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2001.11a
• /
• pp.139-143
• /
• 2001

본 논문은 작은 홀수 표수를 갖는 유한체에서 정의된 타원곡선의 스칼라 곱 연산속도를 향상시키는 새로운 방법을 소개한다. 본 논문에서 제안하는 알고리즘은 스칼라의 프로베니우스 자기준동형 (Frobenius endomorphsim) 확장길이를 줄이는 최근의 방법들을 개선한 방법이다.

• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.9-9
• /
• 1993

GPS는 지구 중심으로부터 GPS 위성의 거리와 위성과 관측자사이의 의사거리(pseudorange)를 이용해서 위치를 결정하는 시스템이다. 1993년 6월 12일 연세대학교에서 3시간동안 관측하여 연세대학교의 위치를 구하였다. 이 위치는 WGS-84 타원체이므로 Bessel타원체로 좌표변환하였다. 위치를 결정하기 위해서는 정확한 위성의 위치와 의사거리에 미치는 잡음(noise)을 제거해야 한다. GPS 위성의 위치 결정에는 지구 비대칭중력항에 의한 섭동, 태양, 달에 의한 섭동, 태앙 복사압에 의한 섭동, 지각, 해양의 조석력에 의한 섭동, 태양빛의 지구 반사도(albedo)에 의한 섭동을 고려해야하며 이를 위해서 위성의 Telemetry를 분석하여 구해 보았다 의사거리의 잡음중 가장 큰 요소인 이온층, 대류층에 의한 지연(delay)에 대해 연구 하였고 각각 Kiobuchar모델, Hopfield모델을 써서 보정을 하였다. 자료 처리를 P모델, PV모델을 만들어 칼만 필터에 적용하였고 RV모델이 P모델보다 더 정확하였나, 위치 결정의 정확도를 알아 보기위해서 국립 천문대부설 GPS관측소에서 결정한 위치와 비교,분석하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.247-249
• /
• 2017

NIST에서 표준으로 정의된 P-192, P-224, P-256, P-384 타원곡선 상의 스칼라 곱셈(scalar multiplication) 연산을 지원하는 Scalable 타원곡선 암호(Elliptic Curve Cryptography; ECC) 프로세서의 설계에 대해 기술한다. 투영(projective) 좌표계를 이용하여 하드웨어 자원 소모가 큰 나눗셈 연산을 제거하였으며, GF(p) 상의 덧셈, 뺄셈, 곱셈 등의 유한체 연산을 지원한다. 워드 기반 몽고메리 곱셈기를 이용하여 다양한 크기의 필드(field)에서 고정된 하드웨어 자원을 통하여 곱셈 연산을 수행하도록 하였으며, 필드의 크기에 따라 연산 사이클이 증가하거나 감소한다. 설계된 Scalable ECC 프로세서는 Verilog HDL로 모델링 되었으며, Modelsim을 이용한 기능검증을 하였다. Xilinx Virtex5 FPGA 디바이스 합성결과 5,376-비트 RAM과 970 슬라이스로 구현되었으며, 최대 55 MHz의 동작 주파수를 갖는다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.300-300
• /
• 2007

최근 전기전자기기 및 광학기기 등의 소형화 및 고기능에 맞추어 구동 장치의 소형화가 필수적으로 요구됨에 따라, 보다 간단한 구조의 다양한 소형 압전 선형 모터에 대한 개발이 활발히 진행되고 있다. 본 연구에서는 굴곡 진동 모드를 갖는 평판형의 압전체와 탄성체로 구성된 압전 트랜스듀서와 두 개의 압전 트랜스듀서를 연결하여 타원 운동을 구현하기 위해, 굴곡 변형이 발생하는 한 쌍의 압전 트랜스듀서에 $90^{\circ}$ 위상차를 갖는 정현파를 각각 인가하여, 한 쌍의 압전 트랜스듀서를 연결하는 돌출부에서 타원궤적을 형성하는 소형 압전 액츄에이터를 설계하였다. 유한요소해석 프로그램인 ATILA를 이용하여 결합부의 타원 궤적의 형성하기 위한 압전 트랜스듀서의 최적 동작 주파수로 운동 모드를 결정하고자 한다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.45-51
• /
• 2002

As Koblitz curve, the Frobenius endomorphism is know to be useful in efficient implementation of multiplication on non-supersingular elliptic cures defined on small finite fields of characteristic two. In this paper a method using the extended Frobenius endomorphism to speed up scalar multiplication is introduced. It will be shown that the proposed method is more efficient than Muller's block method in ［5］ because the number of point addition for precomputation is small but on the other hand the expansion length is almost same.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6B
• /
• pp.531-539
• /
• 2011

It has been widely acknowledged that climate system associated with extreme rainfall events was difficult to understand and extreme rainfall simulation in climate model was more difficult. This study developed a new model for extracting rainfall filed associated with extreme events as a way to characterize large scale climate system. Main interests are to derive location, size and direction of the rainfall field and this study developed an algorithm to extract the above characteristics from global climate data set. This study mainly utilized specific humidity and wind vectors driven by NCEP reanalysis data to define the rainfall field. Geometric first and second moments have been extensively employed in defining the rainfall field in selected zone, and an ellipsoid based model were finally introduced. The proposed geometric moments based ellipsoid model works equally well with regularly and irregularly distributed synthetic grid data. Finally, the proposed model was applied to space-time real rainfall filed. It was found that location, size and direction of the rainfall field was successfully extracted.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.5
• /
• pp.1486-1497
• /
• 1996

The problem of determining the 3-demensional motion of any two rough bodies after a collision involves some rather long analysis and yet in some points it differs essentially from the corresponding problem in tdwo dimensions. We consider a special problem where two rough ellipsolids moving in any manner collide, and analyze the three dimensional impact process with Coulomb friction and Poisson's hypothesis. The differential equations that describe that process of the impact induce a flow in the tangent velocity space, the flow patterns characterize the possible impact cases. By using the graphic method in impulse space and numerical integration thchnique, we analyzed the impact process inall the possible cases and presented the algorithm for determining the post-impact motion. The principles could be applied to the general problem in three dimensions. We verified the effectiveness of the analysis results by simulating the numerous significant examples.

• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.147-153
• /
• 2016

Friction reduction between machine components is important for improving their efficiency and lifespan. In recent years, surface texturing has received considerable attention as a viable means to enhance the efficiency and tribological performance of highly sliding mechanical components such as parallel thrust bearings, mechanical face seals, and piston rings. In this study, we perform lubrication analysis to investigate the effect of dimple shapes and orientations on the lubrication characteristics of a surface textured parallel thrust bearing. Numerical analysis involves solving the continuity and Navier-Stokes equations using a commercial computational fluid dynamics (CFD) code, FLUENT. We use dimples consisting of hemispherical and different semiellipsoidal orientations for simulation. We compare pressure and streamline distributions, load capacity, friction force, and leakage flowrate for different numbers of dimples and orientations. We find that the dimple shapes, orientations, and their numbers starting from an inlet influence the lubrication characteristics. The results show that partial texturing of the bearing inlet region, and the ellipsoidal dimples with the major axis aligned along the lubricant flow direction exhibit the best lubrication characteristics in terms of higher load capacity and lower friction. The results can be used in the design of optimum dimple characteristics for parallel thrust bearings, for which further research is required.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.1
• /
• pp.13-23
• /
• 2020

In this paper, we propose a quantization parameter determination method for face depth image encoding in order to minimize an impact on a face recognition accuracy. When a face depth image is compressed through quantization in H.264/AVC, differential quantization parameters are assigned according to an accuracy of ellipsoid modeling prediction and an importance degree of a unit block in extracting facial features. The simulation results show that the face recognition success rates are improved by up to 6% at the same compression rates through the proposed compression rate determination method.