• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.209-210
• /
• 2007

본 연구에서는 건설현장에서 빈번히 발생하는 안전사고를 줄이기 위해 근로자의 안전모 턱끈 착용을 도와주고 안전관리 감독자가 쉽게 확인 및 관리할 수 있는 전자식 안전모 착용 확인 시스템을 개발하였다. 안전모 착용을 확인하기 위해 마그네틱 근접 센서를 안전모 턱끈에 장착하여 안전모 착용 여부를 검출할 수 있게 하였다. 그리고 무선 센서 네트워크를 구성하기 위해 424.700MHz 주파수를 사용하는 무선 모듈을 개발하여 안전모의형에 장착하여 센서 노드(Sensor Node)를 구성하였으며, 메쉬 토폴로지(Mesh Topology)를 적용하였다. 그리고 중앙 관리실에서 근로자의 상황 인지를 위한 안전모 확인 모니터링 시스템을 개발하였다. 본 시스템으로 인하여 근로자의 안전을 도모하고, 안전 사고에서 근로자의 부상 및 인명 손실을 최소화할 수 있으며, 건설용 엘리베이터 안전 상황 인지, 타워크레인 안전 문제등의 시스템으로 활용이 가능할 것이다.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.817-827
• /
• 2022

The real-name safety management system is to indicate "safety" after inspection by construction personnel before workers use it for the purpose of preventing safety accidents caused by unsafe conditions in temporary facilities and temporary constructions installed at construction sites. Purpose: By implementing the real-name system for safety management at construction sites, the objective is to respond to the "Severe Accident Punishment Act" and to improve the level of safety management at the same time. Method: In this study, a hierarchical analysis model was produced through previous studies of actual conditions such as types of safety incidents and causality at construction sites. The AHP model was used to calculate integrated weights and rankings with a pairwise comparison questionnaire for experts. Conclusion: As a result of the analysis of the upper classes, construction machinery was evaluated the highest, and real-name management system was evaluated the lowest. As a result of the lower-level analysis, it was considered that opening doors for safety facility management, tower cranes for construction equipment, management under the "Occupational Safety and Health Act" under the real-name management system, and CEO duties for safety management organizations were the most important.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.1
• /
• pp.36-44
• /
• 2019

$21^{st}$ century is digitally civilized era. Technologies such as AI, Iot, Big Data, Mobile and etc makes this era digitally advanced. These advancement of the technology greatly impacted detection range of the radar. Human's eye sight can see about 20Km and hear 20 ~ 20000 Hz. These limitations can be overcome using radar. This radar technology is used in military, aircraft, ship, vehicle and etc. to replace human eye. However, radar technology is capable of making False Alarm Rate. This document will propose the fix of these problems. Radar's distortion includes beam refraction, diffraction and reflection. These inaccurate data result in deterioration of human judgements and my cause various casualties and damages. Radar goes through annual testing to test how many false alarm is being produced. Normal radar usually makes 10 to 20 False alarms. In emergency situation, if operator were to follow this false alarm, this might result in following false object or take 12 more seconds to follow the right object. This problem can be overcome by using different radar data from different places and angles. This helps reduces False Alarm rate and track the object twice as fast.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.68-75
• /
• 2019

As the tower crane accident emerged as a social issue in 2017, various government measures were prepared. Most of the measures are focused on erecting, climbing, and dismantling phases. Analyzes of 84 serious accidents related to tower cranes from 2000 to 2018 and 104 near misses accidents from 2016 to 2018 revealed that 50% of the serious accidents occurred during the operating phase. The main occupation influencing operating phase accidents was signalman(81.6% of serious accidents), whose communication and competency were governing causes. This result was the same in 294 questionnaires to signalmen. Signal systems and education policies for tower crane signalman in Korea and foreign countries were analyzed, and standardization of wireless signal system and improvement of education system were propose.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.115-123
• /
• 2015

The study conducted statistical analysis of survey on the 239 workers participating in national Tower Crane installation/dismantlement in order to identify work environment and health hazard exposure of Tower Crane workers. Consequently for work related safety status of Tower Crane workers, the number of installation/dismantlement work was the highest at 15-20 times per month, and safety equipments were not arranged at work and they felt highly anxious when boarding on the Tower Crane. Furthermore, it is found that they feel anxious working in the influence of the weather, noise, vibration, wind, the sun ray, and structure characteristic. They have very low satisfaction in the insecureness of workplace and the work environment, and recognizes that their work affect highly on the health. 81.6% of workers have experienced accident at work, the cause of accidents were mainly due to poor work environment, and the health abnormality they have experienced were mostly fatigue and concentration reduction. For job stress, job demand and conflict in relationship were the highest sections. Total 66.5% of workers complained of musculoskeletal disorder related subjective symptom, and back pain patients were the highest of all groups.