• Korean Journal of Construction Engineering and Management
• /
• v.21 no.2
• /
• pp.79-87
• /
• 2020

The Korean domestic construction management at risk (CMAR) market is in the process of completing the pilot project execution under the leadership of the Ministry of Land, Infrastructure and Transport as of December 2019. The government starts practicing CMAR an alternative delivery method widely in order to diversify delivery methods and enhance construction technology. The CMAR market is thus expected to grow. This study was conducted to improve CMAR firms' capability by developing self-assessment tools for them to evaluate current capability more effectively. As a result of defining standard core capability and additional elements categorized by project execution phase and management area, and performing evaluation from the CMAR project participants, it was found that the general project management capability in the pre-design and procurement phase and quality management area was lower compared to the construction phase and other areas. In addition, the capability of cost management area was lower in spite of its high importance. Communication and coordination, process optimization, and target values achievement were at the initial level of capability and continuous improvement was required.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.62-71
• /
• 2018

According to own investigation conducted by Korea Gas Safety Corporation Gas Safety Research Institute in 2017, the length of underground pipes in domestic high-pressure gas pipelines is approximately 770km, of which 84% is buried in Ulsan and Yeosu industrial complexes. In particular, 56% of underground pipelines have been in operation for more than 20 years. This suggests urgent management of buried high pressure gas pipelines. PHMSA in US and EGIG in Europe, major causes of accidents in buried gas pipelines are reported as third party damage, external corrosion and loss of pipe wall thickness. Therefore, it is important to evaluate whether the defects affect the remaining life of the pipe when defects occur in the pipe. DNV and ASME have evaluated the residual strength of pipelines through the hydraulic rupture test using pipe specimens with artifact flaws. Once the operating pressure is known through the residual strength of the pipe, the wall thickness at the point at which the pipe ruptures is calculated. If we know the accurate rate of corrosion growth, we can predict the remaining life of pipe. In the study, we carried out experiments with A53 Grade.B and A106 Grade.B, which account for 80% of domestic buried pipes. In order to modify the existing model equation, specimens with a defect depth of 80% to 90% was tested, and a formula expressing the relationship between defect and residual strength was made.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.129-138
• /
• 2005

Until the early part of the 1990s, interior design has never been thought important by car makers. Repeated attempts have been made to systemize a technical structure, such as layout, driving method, and size, and the car's interior design has been developed by in simple comparison with the exterior design. In the 1990s, however, this trend began to change because consumers began spending more time in their cars, so the motive of the technology development became that of giving comfort and functional satisfaction to the customers. Observing how a person spends inside his or her car and considering the latest trends in car interiors have made a consumer-oriented sense of value i.e., intensifying the personality of the car's interior design and considering the emotional makeup of the consumer factor in the acquisition of a strategic brand identity. These days, car interiors assume a new concept every year due to the constant change in various factors, and the application of a high-tech design, with a sensing function and a navigation system, to achieve driverless running, is being raised as a key trend element technology for the future. Now, at the present when multilateral concept applications of design are attempted under the direct influences from other fields such as product design, fashion and furniture, I would like to lay stress on investigating and analysing the changes in car interior design varying with the background of the times and formative characteristics from the object point of view. On this study, I would like to compare the background of the times and flow of car interior design with priority given to crash pad and would like to attempt to present the direction of the future car interior design together with diversifying major technical factors.

• Korean Business Review
• /
• v.21 no.2
• /
• pp.1-16
• /
• 2008

This paper investigate the volume-volatility and volume-return relationship in the Korean Treasury Bond futures market using daily price and volume data categorized by three trader type i.e. individual investor, institutional investor and foreign investor over the period of October 1999 through December 2005. Major results are summarized as follows: (i) The effect of volume on return was not different across the trader type. (ii) The effect of volume on volatility was not unidirectional across the type of investor. While unexpected sell of individual investor has positive effects on volatility, negative effects in the case of institutional investor. (iii) We cannot find the evidence of asymmetric response of volatility to shock in trading volume or net position. This result differs from that of Korean Stock Price Index 200 futures market which showed strong positive asymmetry. Finally, some limitations of this paper and direction for further research were suggested.

• Korean Journal of Social Welfare
• /
• v.55
• /
• pp.131-153
• /
• 2003

This study was aimed at investigating important factors influencing career success among disabled workers. The current researcher scrutinized the degree to which variables and factors affect the career success and occupational turnover rates of the research participants. The participants in this study (n=837) were 374 workers with disabilities and 463 workers without disabilities. The results of this study can be summarized as follows: First, the results of factor analysis showed important categories of conceptual themes of career success. The initial conceptual factor model did not accord with the empirical one. Second, both research participant groups seemed to be influenced by their occupational types. However, all predictive variables excluding the wage rate and the average length of work years had significant impact on job success for the disabled work group, while all the variables excluding the frequency of advice and length of working years had significant impact on job success for the non-disabled worker group. Third, the turnover rate was significantly influenced by the age and the experience of turnover of the research participants. However, the number of co-workers was the strongest predictive variable for the worker group with disabilities, but the occupation choice variable for the worker group without disabilities. Fifth, as a result of verifying the hypothetical path model, it showed that the first model was somewhat proper and could predict the career success on both research participant groups. In conclusion, the following research implications can be suggested. The occupational type of research participants was one of the most important variables to predict the career success for both research participant groups.

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.496-504
• /
• 2016

As people's interest in forest trail increases, it has reached a critical time to extend forest trail program. This study clarifies correlation between two variables, organizational commitment and job motivation and identifies the variations in organizational commitment level for job motivation so that the forest trail programs attain its object and meet users' satisfaction. As a result, first, job motivation can be divided into 'personal satisfaction', 'work value', and 'external reward and recognition'; the biggest motivation is 'personal satisfaction', followed by 'work value' and 'external reward and recognition'. Second, job motivation has a positive correlation with organizational commitment. Especially 'personal satisfaction' and 'external reward and recognition' have a positive impact on the organizational commitment. To sum up, the personal satisfaction has a greater impact on organizational commitment than other factors. Therefore, it is needed to draw up measures to increase their personal satisfaction like making them have self esteem from forest trail guide.

• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.83-90
• /
• 2004

DVB-MHP recommends that NPT(normal play time) be used as the times of stream events. NPT is the local time within an event(TV program). But we found that commercial transport stream (TS) generators and middlewares for DVB-MHP settop boxes are not ready to support the use of NPT by applications. In particular, TS generators do not create NPT reference descriptors needed to reconstruct NPT at the TV receiver. This situation is undesirable because program providers cannot experiment with the idea of synchronized applications. So we have implemented a TS generator that inserts NPT reference descriptors to TS and MyGetNPT API to approximately reconstruct NPT. STC (system time clock) is needed to reconstruct NPT, but Xlets are not allowed to read it. So, we approximate STC by using PCR (program clock reference) and the Java system tune. In this method, the stream generator extrats PCRs from an existing TS and inserts them into null TS packets in the form of MPEG sections, which can be read by Xlets. Because PCRs are displaced into new positions in TS, their values should be adjusted based on the time intervals between the original positions and the new positions. We implemented a synchronized application by using our TS generator and MyGetNPT API, where the task of stream events are to display graphic images. We found that graphic images are displayed where 240 ㎳ from their intended time, where 240ms is a human tolerance for the synchronization skew between graphic image and video.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1756-1761
• /
• 2006

본 연구의 목적은 임진강 유역을 대상으로 2005년에 발생한 유출특성을 분석하는데 있다. 임진강 유역은 유역전체 면적중 2/3이상이 북한지역에 위치하고 있어서 전체적인 수문관측 자료를 수집하기 어려운 상황에 있으나, 가용한 수문관측 자료 및 유량측정성과를 이용하여 5개 지점에 대한 유출특성을 분석하였다. 임진강 유역에서는 30분 단위의 연속적인 우량 및 수위관측(건설교통부)을 하고 있으며, 기상청에서는 1시간 단위의 기상관측을 하고 있다. 우량 및 수위자료의 수집과 검토를 통하여 유역면적우량과 5개 수위관측소의 수위를 최종 확정하였다. 그리고 2005년에 측정한 유량측정성과를 통하여 유량측정성과에 대한 불확실도, 기본 수리특성 분석, 수위-유량관계곡선식을 개발하여 유량을 산정하였다. 산정된 유량은 월별, 주요 호우사상별 유출률 분석을 통하여 합리적인 유출률 범위내에서 재 조정절차를 거쳐 최종 유량을 확정하였다. 산정된 유출률은 57.0%(영중)${\sim}$72.1%(적성)의 유출률을 보였으며, 2004년 임진강 유량측정용역 보고서의 유출률과 비교한 결과 일부지점을 제외하고는 비교적 일치하는 것으로 나타났다. 임진강 유역의 일부인 설마천 시험유역에서의 2005년 연간 유출률은 60.9%로 상기의 값은 매우 타당하다고 할 수 있다. 그리고, 남북한 수문자료의 공유 및 기술적 교류, 유역 전체의 정밀한 수문관측 및 신뢰성 있는 수문자료 생성이 이루어진다면 보다 정확한 유출특성 거동을 분석할 수 있을 것이며, 효과적인 치수 및 이수계획의 수립 등 수자원 개발을 위한 기반을 확보할 수 있을 것이다.수리모형실험과 연계하여 댐 설계에 효율적으로 사용될 수 있을 것으로 전망된다.지는 것으로 평가되었다. 그러나 본 연구결과를 통하여 투수성 포장과 지하수에 관련된 매개변수의 집적과 분석결과는 현장기술 적용 시 매개변수의 유용한 선택과 도시유역의 물 순환 건전화 대안기술 적용에 효과적인 방법론을 제시할 수 있을 것으로 사료된다.첨두홍수량을 저류하기 위해서 상대적으로 넓은 저류면적이 필요한 것으로 나타난다. 대등한 수위감소값의 홍수저감효과를 발휘하기 위해서 본 연구에서는 On-Line 저류지 면적은 Off-Line 저류지에 비 두배 이상이 필요한 것으로 보여졌다.들에 관한 정보는 종종 현장관측에서 조차 무시되는 경우가 많다. 이에 본 연구에서는 수질모형의 매개변수 중 특히 수리특성에 관련된 매개변수들이 수질에 미치는 영향을 파악하는 것을 목적으로 하고 있다. 이를 위해 적용된 수질모형은 QualKo를 사용하였으며, 대상 하천은 낙동강 본류 경남구간 시점 부근인 회천 합류 전부터 낙동강 본류 경남구간 종점 부근인 밀양강 합류 전까지의 경남 오염총량관리 기본계획 시 구축된 모형 매개변수를 바탕으로 분석을 수행하였다. 일차오차분석을 이용하여 수리매개변수와 수질매개변수의 수질항목별 상대적 기여도를 파악해 본 결과, 수리매개변수는 DO, BOD, 유기질소, 유기인 모든 항목에 일정 정도의 상대적 기여도를 가지고 있는 것을 알 수 있었다. 이로부터 수질 모형의 적용 시 수리 매개변수 또한 수질 매개변수의 추정 시와 같이 보다 세심한 주의를 기울여 추정할 필요가 있을 것으로 판단된다.변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.40-44
• /
• 2011

This study was conducted to develop method of producing okra in the plastic house and the 11 cultivar of okra were planted in plastic house for selecting proper cultivar in Korea. As result of observing growth, commercial cultivar germinated better than wild collected. The germination rate in 'No 1', 'No 4' and 'No 5' were better than in 'No 2' and 'No 3'. The plant height of 'No. 4', which is one of wild collected, showed biggest plant height moreover 'Greensode'. The numbers of node, which could indicate to set fruit, showed 4.2~6.5 per plant in most cultivar and 'No 2' and 'No 5' could yield more than others. 'Greensode' was planted in plastic house for finding out suitable planting method. The seeds were soaked could germinate 100% and those were taken 8 days for germinating but control seeds needed 15 days to germinate. The yield of 'Greensode' which was planted in $45{\times}75cm$ with planted 3 and 4 per hill could best produce in plastic house.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.3
• /
• pp.249-258
• /
• 2010

This study seeks to improve NFRDI Serial Oceanographic observation (NSO) system which has been operated at current observation stations in the Korean Seas since 1961 and suggests the direction of NSO for practical use of Korean operational oceanographic system. For improvement, data handling by human after CTD (Conductivity-Temperature-Depth) observation on the deck, data transmission, data reception in the land station, and file storage into database need to be automated. Software development to execute QA/QC (Quality Assurance/Quality Control) of real-time oceanographic observation data and to transmit the data with conversion to appropriate format automatically will help to accomplish the automation. Inmarsat satellite telecommunication systems with which have already been equipped on board the current observation vessels can realize the real-time transmission of the data. For the near real-time data transmission, CDMA (Code Division Multiple Access) wireless telecommunication can provide efficient transmission in coastal area. Real-time QA/QC procedure after CTD observation will help to prevent errors which can be derived from various causes.