• Nuclear industry
• /
• v.37 no.9
• /
• pp.58-90
• /
• 2017

'공포의 값비싼 대가(The High Cost of Fear)'는 공개된 자료 중 동료 평가를 마친 최신의 자료와 간단한 계산 방법을 통해 한국의 탈원전 정책이 가져올 경제적, 환경적 영향을 분석한 보고서이다. 우리는 탈원전 정책이 다음과 같은 영향을 미칠 것으로 예측한다. ${\cdot}$천연가스 구매에만 최소 매년 100억 달러의 비용이 들 것이다. 이는 한국 평균임금인 연소득 29,125달러를 받는 일자리 343,000개에 해당하는 금액이다. ${\cdot}$비용의 대부분은 연료 수입에 사용될 것이며, 한국의 무역 수지가 악화될 것이다. ${\cdot}$한국의 부족한 재생에너지 자원을 고려할 때, 상당한 양의 화석 연료를 추가로 사용하게 될 것이다. ${\cdot}$LNG 발전소가 석탄 발전소를 대체하지 못하고 원자력발전소를 대체하면서 대기 오염으로 인한 조기 사망자 수가 증가할 것이다. ${\cdot}$한국의 전도유망한 원전 수출 산업이 아예 붕괴되거나 큰 타격을 입을 것이다. ${\cdot}$평균적 미국 자동차의 연간 주행거리를 기준으로 150만대에서 270만대의 미국 자동차가 배출하는 배기가스의 양만큼 연간 탄소 배출이 증가할 것이고, 한국은 파리기후협정에서 약속한 탄소 배출 감축 목표를 달성할 수 없게 된다. 본 보고서는 현재 계획된 탈원전 정책의 역사적 사회적 배경을 분석하여 다음과 같은 결론을 도출하였다. ${\cdot}$'그린피스(Greenpeace)', '지구의 친구들(Friends for the Earth)' 등 막대한 자금 지원을 받는 해외 환경단체들은 탈원전 거짓 정보의 근원이며, 이들은 저렴하고 풍부한 에너지라는 개념을 반대한다. ${\cdot}$후쿠시마 원전 사고와 그 여파의 주된 원인은 일본 원자력산업계의 오만과 원자력에 대한 과장된 집단 공포이다. ${\cdot}$반핵 진영의 논리에는 산업계와 정부에 대한 불신과 원자력, 방사선에 대한 몰이해가 반영되어 있다. ${\cdot}$반핵 진영은 후쿠시마 사고를 2014년 한수원 납품 비리 사태의 심각성을 과장하는 데 사용하고 있다. 2014년의 비리 사태는 한국 원자력 규제기관의 독립성을 증명했으며, 2016년의 경주 지진은 2011년 후쿠시마에서 쓰나미와 노심 용융을 초래한 동일본 대지진의 1/350,000의 크기밖에 되지 않는다. 본 보고서는 한국과 타국가의 반핵 운동이 주는 교훈을 다음과 같이 정리하였다. ${\cdot}$어떠한 국가도 에너지 자원 최빈국인 프랑스나 한국 같은 국가조차도 탈원전 '전쟁'에서 자유롭지 않으며, 이는 전 세계적으로 원자력산업이 쇠퇴하는 원인이다. ${\cdot}$원자력산업계, 정부, IAEA 등은 한국과 세계 여러 국가에서- 문화적, 제도적, 재정적 원인으로 원자력산업의 보호와 확대라는 목표를 달성할 수 없다. ${\cdot}$원자력산업을 구하기 위해서는 새로운 비전과 새로운 제도, 그리고 새로운 리더십이 필요하다. ${\cdot}$원자력의 근원적이고 혁신적인 비전 원자력 인본주의(atomic humanism)에 대한 재조명이 필요하다. ${\cdot}$원자력을 지키고 대중과 소통하기 위해 과학 연구단체, 대학교, 사단법인, NGO 등의 새로운 기관들을 후원해야 한다. ${\cdot}$공포를 조장하는 반원전 세력에 맞서 공포를 극복해야 하고, 대중의 공포를 극복해왔던 다른 기술들의 사례에서 교훈을 얻어야 한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.1-10
• /
• 2008

Shear wave velocity($V_S$), which can be obtained using various seismic tests, has been emphasized as representative geotechnical dynamic characteristic mainly for seismic design and seismic performance evaluation in the engineering field. For the application of conventional geotechnical site investigation techniques to geotechnical earthquake engineering, standard penetration tests(SPT) and piezocone penetration tests(CPTu) together with a variety of borehole seismic tests were performed at many sites in Korea. Through statistical modeling of the in-situ testing data, in this study, the correlations between $V_S$ and geotechnical in-situ penetrating data such as blow counts(N value) from SPT and piezocone penetrating data such as tip resistance ($q_t$), sleevefriction($f_s$), and pore pressure ratio($B_q$) were deduced and were suggested as an empirical method to determine $V_S$. Despite the incompatible strain levels of the conventional geotechnical penetration tests and the borehole seismic tests, it is shown that the suggested correlations in this study are applicable to the preliminary estimation of $V_S$ for Korean soil layers.

• Journal of the Economic Geographical Society of Korea
• /
• v.24 no.3
• /
• pp.313-329
• /
• 2021

This study analyzed the characteristics of the management crisis, the level of resilience, and the alternatives based on the companies' self-evaluation of the game industry in Daegu. The Daegu game industry, which started spontaneously in the late 1990s, grew rapidly until the late 2000s with the support of the government and supporting organizations. However, from the mid-2010s, it has entered a period of recession due to the number of companies that failed to respond to the saturation of the mobile game market and fierce competition at home and abroad. In response, some game companies turned the crisis into an opportunity to strengthen their competitiveness by pursuing challenging strategies for product differentiation and pioneering new markets. On the other hand, companies that were passive in responding to the crisis have not get out of the management crisis. In addition, in terms of the resilience level of game companies in Daegu, the level of immediate response to shock(rapidity) and replacement of the damaged part(redundancy) was low, but the level of mobilizing sufficient resources internally(resourcefulness) was high. However, as the Daegu game industry is facing more complex multi-spatial-scale environmental changes than in the past, its resilience should be strengthened through strategies that can compensate for weaknesses in terms of the game industry ecosystem beyond individual company-level efforts.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.41-48
• /
• 2019

In modern-war campaign, precision-guided missiles are dominantly used to minimize the collateral damage. Imaging infrared seekers are widely applied for the precise guidance. Due to the high cost of the infrared detector, the cost for the one-shot weapon's test is a burden for the development. To reduce the test cost, a simulation method including imagery tracking is required, which is so-called integrated-flight simulation(IFS). The synthetic image generation(SIG)-based simulation method is typically used, which however cannot represent various environmental and target conditions. In this paper, a new IFS method is proposed using on-sight measured image to overcome the limitations of the SIG-based IFS(SIIFS). The target image acquired at the launching sight has been used only for checking the performance criteria of the image tracker and has not been tried for IFS since it has low resolution and little information. The study described in this paper, however, shows that the on-sight image-based IFS can predict the pre- and mid-course flight performance quite similarly and is very useful for the flight test analysis.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.51-60
• /
• 2011

Electrical resistivity is applied for understanding details about layers and obtaining basic properties of soils to various measurement devices. The objective of this study is development of TRP(Temperature-compensated Resistivity Probe), analysis about effects of temperature changes during cone penetration test, and observation of characteristics of cone penetration. In order to observation of temperature changes according to a diameter difference of resistivity cone probe, the cone which has wedge type cone tip is made to two types, 2mm and 5mm. Temperature sensor is attached at 15mm below from cone tip because of an electrical interference with elecrical resistance probe. Delectrical connector is used to prevent electric disturbance between motor type penetrating machine and electrical resistivity cone probe. Application tests are carried out in acrylic cell whose diameter is 30cm with uniform Jumunjin sand according to densification caused by blows. The test results indicate that the temperature is increased uniformly during penetration and a tendency, characteristics of cone penetration, is discovered during altering state of soils. This study suggests that the temperature effects and characteristics of penetration should be considered in penetrating tests in order to conduct an accurate ground investigation using TRP(Temperature-compensated Resistivity Probe).

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.143-152
• /
• 2024

Due to COVID-19, domestic Duty-free shops have been severely impacted, and with the expansion of the untact market, the proportion of mobile shopping has increased. So far, mobile duty-free shop AR shopping is not active, and related research is scarce. Therefore, we aims to enhance Duty-free Shopping APPs with AR technology by researching the needs of foreign users. First, in the mobile duty-free shop app, the AR shopping interface must be in a prominent position to be open and easy to use. Second, there should be an explanation or help for location and function so that all users can easily recognize the AR shopping interface. Third, when wearing duty-free items in the AR shopping interface or adding them to the storage and shopping cart of interest, the interface must be simple and flexible, making it convenient to use and operate. Fourth, technical improvements must be made to prevent errors. We expect that the research will help develop AR shopping technology and domestic duty-free shop AR shopping technology and revitalize online and offline duty-free shops.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.4
• /
• pp.5-16
• /
• 2018

In the current study, the engineering behaviour of prebored and precast steel pipe piles was examined from a series of full-scale field measurements by conducting static pile load tests, dynamic pile load tests (EOID and restrike tests) and Class-A and Class-C1 type numerical analysis. The study includes the pile load - settlement relations, allowable pile capacity and shear stress transfer mechanism. Compared to the allowable pile capacity obtained from the static pile load tests, the dynamic pile load tests and the numerical simulation showed surprisingly large variations. Overall among these the restrike tests displayed the best results, however the reliability of the predictions from the numerical analysis was lower than those estimated from the dynamic pile load tests. The allowable pile capacity obtained from the EOID tests and the restrike tests indicated 20.0%-181.0% (avg: 69.3%) and 48.2%-181.1% (avg: 92.1%) of the corresponding measured values from the static pile loading tests, respectively. Furthermore, the computed results from the Class-A type analysis showed the largest scatters (37.1%-210.5%, avg: 121.2%). In the EOID tests, a majority of the external load were carried by the end bearing pile capacity, however, similar skin friction and end bearing capacity in magnitude were mobilised in the restrike tests. The measured end bearing pile capacity from the restrike tests were smaller than was measured from the EOID tests. The present study has revealed that if the impact energy is not sufficient in a restrike test, the end bearing pile capacity most likely will be underestimated. The shear stresses computed from the numerical analysis deviated substantially from the measured pile force distributions. It can be concluded that the engineering behaviour of the pile is heavily affected if a slime layer exists near the pile tip, and that the smaller the stiffness of the slime and the thicker the slime, the greater the settlement of the pile.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.293-303
• /
• 2012

Recently, as construction technology improved, concrete structures not only became larger, taller and longer but were able to perform various functions. However, if extreme loads such as impact, blast, and fire are applied to those structures, it would cause severe property damages and human casualties. Especially, the structural responses from extreme loading are totally different than that from quasi-static loading, because large pressure is applied to structures from mass acceleration effect of impact and blast loads. Therefore, the strain rate effect and damage levels should be considered when concrete structure is designed. In this study, the low velocity impact loading test of steel fiber reinforced concrete (SFRC) slabs including 0%~1.5% (by volume) of steel fibers, and strengthened with two types of FRP sheets was performed to develop an impact resistant structural member. From the test results, the maximum impact load, dissipated energy and the number of drop to failure increased, whereas the maximum displacement and support rotation were reduced by strengthening SFRC slab with FRP sheets in tensile zone. The test results showed that the impact resistance of concrete slab can be substantially improved by externally strengthening using FRP sheets. This result can be used in designing of primary facilities exposed to such extreme loads. The dynamic responses of SFRC slab strengthened with FRP sheets under low velocity impact load were also analyzed using LS-DYNA, a finite element analysis program with an explicit time integration scheme. The comparison of test and analytical results showed that they were within 5% of error with respect to maximum displacements.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.111-126
• /
• 2017

Recommender systems based on association rule mining significantly contribute to seller's sales by reducing consumers' time to search for products that they want. Recommendations based on the frequency of transactions such as orders can effectively screen out the products that are statistically marketable among multiple products. A product with a high possibility of sales, however, can be omitted from the recommendation if it records insufficient number of transactions at the beginning of the sale. Products missing from the associated recommendations may lose the chance of exposure to consumers, which leads to a decline in the number of transactions. In turn, diminished transactions may create a vicious circle of lost opportunity to be recommended. Thus, initial sales are likely to remain stagnant for a certain period of time. Products that are susceptible to fashion or seasonality, such as clothing, may be greatly affected. This study was aimed at expanding association rules to include into the list of recommendations those products whose initial trading frequency of transactions is low despite the possibility of high sales. The particular purpose is to predict the strength of the direct connection of two unconnected items through the properties of the paths located between them. An association between two items revealed in transactions can be interpreted as the interaction between them, which can be expressed as a link in a social network whose nodes are items. The first step calculates the centralities of the nodes in the middle of the paths that indirectly connect the two nodes without direct connection. The next step identifies the number of the paths and the shortest among them. These extracts are used as independent variables in the regression analysis to predict future connection strength between the nodes. The strength of the connection between the two nodes of the model, which is defined by the number of nodes between the two nodes, is measured after a certain period of time. The regression analysis results confirm that the number of paths between the two products, the distance of the shortest path, and the number of neighboring items connected to the products are significantly related to their potential strength. This study used actual order transaction data collected for three months from February to April in 2016 from an online commerce company. To reduce the complexity of analytics as the scale of the network grows, the analysis was performed only on miscellaneous goods. Two consecutively purchased items were chosen from each customer's transactions to obtain a pair of antecedent and consequent, which secures a link needed for constituting a social network. The direction of the link was determined in the order in which the goods were purchased. Except for the last ten days of the data collection period, the social network of associated items was built for the extraction of independent variables. The model predicts the number of links to be connected in the next ten days from the explanatory variables. Of the 5,711 previously unconnected links, 611 were newly connected for the last ten days. Through experiments, the proposed model demonstrated excellent predictions. Of the 571 links that the proposed model predicts, 269 were confirmed to have been connected. This is 4.4 times more than the average of 61, which can be found without any prediction model. This study is expected to be useful regarding industries whose new products launch quickly with short life cycles, since their exposure time is critical. Also, it can be used to detect diseases that are rarely found in the early stages of medical treatment because of the low incidence of outbreaks. Since the complexity of the social networking analysis is sensitive to the number of nodes and links that make up the network, this study was conducted in a particular category of miscellaneous goods. Future research should consider that this condition may limit the opportunity to detect unexpected associations between products belonging to different categories of classification.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.99-110
• /
• 2012

The purpose of the study is to collect basis data for to establish standard administrative processes of liquid fertilizer treatment. From this survey we could make out the key point of each step through a case of effective liquid manure treatment system in pig house. It is divided into six step; 1. piggery slurry management step, 2. Solid-liquid separation step, 3. liquid fertilizer treatment (aeration) step, 4. liquid fertilizer treatment (microorganism, recirculation and internal return) step, 5. liquid fertilizer treatment (completion) step, 6. land application step. From now on, standardization process of liquid manure treatment technologies need to be develop based on the six steps process.