• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.497-506
• /
• 2015

A composite guidance law for impact angle control against nonstationary nonmaneuvering targets is proposed. The proposed law is based on the characteristics of proportional navigation and generates two kinds of guidance commands during the homing phase. The first command is to keep the desired look angle, and the second is to attack the target with impact angle constraint. The switch of guidance phases occurs when the specific light-of-sight(LOS) angle determined from the engagement information is satisfied. The calculation method of the maximum achievable impact angle is also proposed to design easily the desired impact angle within the missile capability. Numerical simulations are performed to investigate the performance and characteristics of the proposed law.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.106-115
• /
• 2021

Classifying work trades using images can serve an important role in a multitude of advanced applications in construction management and automated progress monitoring. However, images obtained from work sites may not always be clean. Defective images can damage an image classifier's accuracy which gives rise to a needs for a method to enhance a work trade image classifier's performance. We propose a method that uses work dependency information to aid image classifiers. We show that using work dependency can enhance the classifier's performance, especially when a base classifier is not so great in doing its job.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.328-334
• /
• 2020

At the recent practice test of the Remote Controlled Munition system (for practice), nine out of 125 samples were generated. Although 7.2 % misfires occurred, the acceptance test met the defense standards. Minimizing the probability of broken fuses is essential to reducing the number of samples and improving the AQL according to the process quality. In addition, it is necessary to increase military training and ensure user safety. In the case of practical grenades, hit-type detonators are applied. Unlike the normal design, which takes a hit by strikers, a different design of a hit by pressure from a pressure generator was used. This study analyzed the detonator surface through computational fluid dynamics. The results showed that the probability of functional weakness and retraction increased with increasing slope of the detonator surface. To overcome this, design changes were made to improve the fuse crimping process and increase the detonator holder seat. A performance test with the same number of samples from the whole quantity was operated. The probability of broken fuses was 0 %. Therefore, the reliability and performance of the ammunition can be improved and is expected to contribute to the drawing and process design when developing similar ammunition.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.10a
• /
• pp.63-66
• /
• 2003

남획에 의한 어자원 감소와 오염으로 인한 해양 환경의 변화, 그리고 주변국과의 어업협정 체결 및 수입 개방 조치 등에 의한 어업정책의 변경으로 어업인의 소득이 심각한 타격을 입게 되면서, 어획 성능이 우수하고 조업 방식이 간편하며 소요 경비가 절감되는 어구어법으로의 전환이 빠르게 진행되고 있는 실정이다. 삼중자망은 홑자망, 통발에 비해 조업방법이 간단하고 특별한 어로설비를 필요로 하지 않으며 우수한 어획성능을 가지고 있어 어업인들이 선호하고 있으나 심각한 자원 남획을 유발하는 어구이기 때문에, 삼중자망의 불법사용에 대한 규제와 단속을 지속적으로 실시하고 있다. (중략)

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.1
• /
• pp.17-24
• /
• 2009

The performance improvement of a small-size integrated-type fully hydraulic breaker is studied in this paper. Mathematical modeling of the breaker is established and verified by experiment. Through sensitivity analysis using AMESim, the key design parameters are selected and nearly optimized to maximize the impact energy as well as to improve the dynamic characteristics such as the piston upper chamber pressure, piston and valve displacements. As a result, the impact energy, blows per minute(bpm) and output power are increased by 52.9%, 1%, and 55.6%, respectively compared with the current design. The dynamic characteristics of the piston upper chamber pressure, piston and valve displacements are also improved by the design change.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.3
• /
• pp.1-8
• /
• 2008

The optimal design of a large-size fully hydraulic breaker is studied in this paper. Mathematical modeling of the breaker is established and verified by experiments. Through sensitivity analysis, the key design parameters of the breaker are selected, which mostly affect the performance of the breaker. Taguchi method is used to optimize the key design parameters in order to maximize the output power through simulation using AMESim. As a result, the impact energy is increased by 18.9% and the output power is increased by 12.4% compared with the current design. The pressure pulsation in the supply line is also reduced by the optimization.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.104-112
• /
• 2011

During the ground operation of Korean army, the voice message is mainly used for exchanging informations related to the surveillance and reconnaissance, command and control, and precision strike. However, in order to the battlefield visualization among fighting powers participating in the ground force operation, automatic situational awareness and variable message format (VMF) for command and control are required. For securing core technologies necessary for the battlefield visualization, message standard and message handler are established through several applied researches. Besides, the VMF for equipping a weapon system is in development. In this paper, a study on the Korean variable message format (KVMF), where interoperability of integrated battle management system (BMS) is guaranteed due to performing joint, ground, and combined operations so that the situation awareness and strike system can be automated in almost real time, is presented. From the modeling and simulation (M&S) results of the message processor, delay time is varied in accordance with the number of nodes in unit platoon network, message length, and generation interval of routine messages. Therefore, it is shown that the system performance can be optimized by establishing proper network protocol for each situation.

• Information and Communications Magazine
• /
• v.28 no.4
• /
• pp.41-50
• /
• 2011

미래 전에서는 정보의 중요성이 더욱 부각되고 있으며 정보의 수집 및 전파, 정확한 지휘결심 및 전파, 기동타격체계의 통제 등으로 이어지는 지휘통제의 전 과정을 유기적으로 연결하여, 그 성능을 극대화시키는 것이 네트워크 중심전(NCW: Net-Centric Warfare)의 개념이다. NCW 실현을 위해 개발중인 여러 체계 중 주목 받고 있는 것이 무인기(UAV: Unmanned Aerial Vehicle) 이다. 무인기는 감시정찰, 고정밀 타격, 그리고 전투피해평가 기능 등을 수행하며, 전술적인 상황인식이 가능하게 한다. 무인기가 이러한 임무를 수행하기 위해서는 비행체의 상태정보, 비행체의 조종통제정보, 그리고 임무 탑재체가 획득한 정보의 간단없고 정확한 전달이 요구된다. 이러한 정보를 전송하기 위한 비행체와 지상체간의 제반 통신을 데이터 링크(Data Link)라 하며, NCW 구현에 있어서 가장 핵심이 되는 요소이다. 세계 각국은 영상정보 수집자산으로서 무인기와 데이터링크의 개발에 박차를 가하고 있는 실정이며, 우리 군도 전력화가 계획된 각 제대별 무인기의 통합운용을 위한 영상정보 공용데이터 링크 (MPI-CDL: Multi-Platform Image and Intelligence Commom Data Link)를 개발중에 있으며 지속적인 영상정보 수집자산의 소요증가에 따른 주파수 획득문제와 사업별 독자적인 데이터 링크의 개발을 지양하고 기존체계와의 상호운용 및 단절없는 통신을 보장을 위해 개발과 동시에 국가적 차원에서의 기술구조 표준화가 추진되어야 한다. 이러한 시점에서 본고에서는 먼저 선진국의 (CDL : Commom Data Link) 표준화 동향을 알아보고, 상호운용성과 연동을 위한 한국형 MPI-CDL 기술 표준화방향을 제시하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.333-333
• /
• 2010

압전형 에너지 하베스팅 소자는 외부에서 버려지는 기계적 진동 혹은 타격과 관련된 에너지로부터 전기 에너지를 획득할 수 있다는 잇점이 있다. 그러나 현재 이 방식으로부터 획득될 수 있는 에너지는 매우 작다는 단점이 있다. 이러한 문제들을 해결하기 위하여 본 연구에서는 두 가지 형태의 압전 소재를 제작하였다. 에너지 하베스팅 소자용 고효율 압전 세라믹와 결정배향된 세라믹을 제작하고 이에 대한 성능을 조사하였다. 결정 배향된 세리믹에서는 1 N의 외부 충격조건에서 소재가 100 V, 1 mW의 전력을 발생하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.5 s.98
• /
• pp.536-541
• /
• 2005

This paper Presents the performance test of an impact hammer drill in conjunction with the parameter consideration of coefficient of restitution, lubrication and friction, pressure leakage, vibration damper and production quality. Novel measurement setups are innovated in order to get the Parameter data. The measured data are compared with the computational results, and this comparison gives a confidence on the computational model, which can be used for a optimal design of impact hammer drills.