• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.49-50
• /
• 2011

Receiving sensitivity of the power gain by using Soret typed FZPL antenna should be worse when obliquely incident wave is illuminated on the FZPL. To solve this problem, elliptic Fresnel Zone Plate Lens antenna system should be introduced. Some numerical results computed by PO method are compared with Kirchhoff's approximation and measurement result.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.435-442
• /
• 2014

In this paper, radar cross section (RCS) analysis program, RACSAN has been developed to predict RCS of complex structures. RACSAN is based on the high frequency range analysis method of Kirchhoff approximation in physical optics (PO). This program can present RCS including multi-bounce effect in complex structures by combination of geometric optics (GO) and PO method. GO method has a concern in the evaluation of the effective area, and PO method is involved in the calculation of RCS for the final effective area that is evaluated by GO method. Comparisons of the predicted results and analytical solutions showed that the developed program could be an effective tool for predicting RCS in complex structures.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.5
• /
• pp.282-290
• /
• 2014

Though there have been advances in the numerical analysis of the acoustic scattering by smooth objects, numerical analysis of the acoustic scattering by the objects that are partially exposed on the interface are still rare. In determining the backscattering amplitude by a partially buried cylinder on a seabed, reverberation by the interface changes the feature of the scattering form function. Current study adopted the Method of moments (MoM) to provide the numerical analysis on the backscattering amplitude for a partially buried cylinder on a flat interface. Suggested numerical analysis showed the good agreements with the measurements and the analytic solution obtained by the Kirchhoff approximation. Numerical analysis described in the current study can be applied to the backscattering problem of any shape of the objects partially imbedded on a seabed by combining the reverberation from the seabed with the scattered wave from the objects.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.410-415
• /
• 2013

Acoustic target strength (TS) is one of the most considerable design elements for survival capacities of the submarine. It needs to reduce acoustic TS that submarines are getting larger and larger, Alberich anechoic coatings are widely used as the representative method. In this paper, the finite element method (FEM) is used to analyze the reflection and transmission coefficients of Alberich anechoic coatings, which have periodic unit cells. The FEM results are compared with experimental results in the literature. Moreover, acoustic TS for the submarine is analyzed by using that result. Finally, it is shown that acoustic TS (Case 1: 10dB, Case 2: 6dB) are reduced due to the use of Alberich anechoic coatings.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.5
• /
• pp.440-451
• /
• 2014

A multi-static SONAR system consists of the transmitters and receivers separately in space. The active target echoes are received along the transmitter-target-receiver path and depend on the shape and aspect angle of the submerged objects at each receiver. Thus, the target echo algorithm used with a mono-static system, in which the transmitter and receiver are located at the same position, has limits in simulating the target echoes for a multi-static SONAR system. In this paper, a target echo modeling procedure for a 3D submerged object in space is described based on the Kirchhoff approximation, and the SONAR system is extended to a multi-static SONAR system. The scattered field from external structures is calculated on the visible surfaces, which is determined based on the locations of the transmitter and receiver. A series of experiments in an acoustic water tank was conducted to measure the target echoes from scaled targets with a single transmitter and 16 receivers. Finally, the numerical results were compared with experimental results and shown to be useful for simulating the target echoes/target strength in a multi-static SONAR system.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.64-70
• /
• 2005

Target Strength(TS) is an important factor for the detection of the target in an active sonar system: thus the numerical model for the prediction of TS is widely being developed. For the frequency range of several kHz, the most important scattering mechanism is known to be specular reflection, which is largely affected by the geometrical shape of the target. In this paper, a numerical algorithm to predict TS is developed based on the Kirchhoff approximation which is computationally efficient. The developed algorithm is applied to the canonical targets of simple shapes, for which the analytical solutions exist. The numerical results show good agreement with the analytical solutions. Also, the algorithm is applied to more complex scatterers, and is compared with the experimental data obtained in the water tank experiment for the purpose of verifying the developed numerical model. Discussions on the effect of spatial sampling and other aspects of numerical m odeling are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.138-144
• /
• 2024

This paper presents a bistatic to monostatic conversion technique to analyze the bistatic target strength of submarines. The technique involves determining the transmission path length of acoustic waves, which are emitted from a source, scattered off an underwater target, and eventually received by a receiver. By generating a corresponding virtual scattering surface, this method effectively transforms the target strength analysis problem from bistatic to monostatic. The converted monostatic target strength problem can be assessed using a well-established monostatic numerical methods. The bistatic target strength analysis for Benchmark Target Strength Simulation (BeTTSi), a widely used target strength model were performed. The results were compared with those calculated by boundary element methods and Kirchhoff approximation, and confirmed the validity and the practical applicability of the proposed analysis technique for evaluating submarine target strength.