• 한국지하수토양환경학회지:지하수토양환경
• /
• 제7권4호
• /
• pp.40-47
• /
• 2002

본 연구는 유류저장시설에서의 토양오염 방지를 위한 국·내외 관련 시설과 기술 조사 및 관련 법규정 검토를 통해 국내 시설의 현황과 문제점을 도출하고 토양오염 방지조치시설의 기준을 구체화하거나 보완 또는 개선하여 보다 효과적인 토양오염 방지책을 제시하고자 하였다. 부식산화 방지를 위해 저장탱크는 강철-클래드 탱크, 내부 라이닝 탱크 또는 이중벽 탱크를 사용하고 배관은 내부식성 물질로 만든 배관을 사용하는 것이 비용경제적이며 효율적이라고 사료된다. 흘림방지를 위해 주유기 Sump를 설치할 필요가 있으며, 넘침방지 시설의 보호를 위해 유류의 주입방식을 가압식 주입에서 자연 유하식 주입으로 변경할 필요가 있다. 모든 탱크 및 배관 관련 시설은 저장물질의 누출여부를 확인할 수 있도록 자동누출측정기기, 증기 감지시설, 지하수 감시시설, 또는 이중벽 감시시설 등 저장물질의 누출여부를 확인할 수 있도록 한가지 이상의 모니터링 시설을 갖추어야 할 필요가 있는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.47-53
• /
• 2013

We have investigated the traits of clad metals in hot-rolled clad steel plates, including the sensitization and mechanical properties of STS 316 steel plate and carbon steel (A516), under various specific circumstances regarding post heat treatment, multilayered welds, and thick or repeated welds for repair. For evaluations, sectioned weldments and external surfaces were investigated to reveal the degree of sensitization by micro vickers hardness, tensile, and etching tests the results were compared with those of EPR tests. The clad steel plates were butt-welded using FCAW and SAW with the time of heat treatment as the variable, a that was conducted at $625^{\circ}C$, for 80, 160, 320, 640, and 1280 min. Then, the change in corrosion resistance was evaluated in these specimens. With carbon steel (A516), as the heat treatment time increased, the annealing effect caused the tensile strength to decrease. The micro-hardness gradually increased and decreased after 640 min. The elongation and contraction of the area also increased gradually. The oxalic acid etch test and EPR test on STS316 and the clad metal showed STEP structure and no sensitization. From the test results on multi-layered and repair welds, it could be concluded that there is no effect on the corrosion resistance of clad metals. The purpose of this study was to suggest some considerations for developing on-site techniques to evaluate the sensitization of stainless steels.

• 센서학회지
• /
• 제9권5호
• /
• pp.365-372
• /
• 2000

소산장 흡수를 이용한 다채널 광섬유형 미각센서를 제작하여 인간이 느끼는 다섯 가지의 기본 맛 및 혼합 맛에 대한 센서의 특성을 평가하고 그에 대한 패턴을 분석하였다. 센서소자는 광섬유의 클래드 층을 제거하고 그 대신 실리콘 폴리머내에 6가지의 색소를 고정화한 감지막을 각각 코팅하여 다채널로 제작하였으며, 측정하고자 하는 미물질의 농도변화에 따른 감지막내로의 소산장의 흡수량 변화를 측정하는 방법을 이용하였다. 제작된 센서로부터 얻어진 출력값에 대한 응답패턴을 제작한 결과, 5가지의 기본 맛 즉, 단맛, 짠맛, 신맛, 쓴맛 및 우마미를 내는 대표 물질들에 대해 각기 다른 패턴을 얻을 수 있었으며 센서의 감도는 인간이 느낄 수 있는 역가 이상의 넓은 범위에서 선형적인 측정이 가능하였다.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.465-473
• /
• 2020

For surface hardening of a continuous casting mold component, a fundamental metallurgical investigation on dissimilar laser clads (Cu-NiCrBSi) is performed. In particular, variation behavior of microstructures and mechanical properties (hardness and wear resistance) of dissimilar clads during long-term service is clarified by performing high-temperature post-clad heat treatment (temperature range: 500 ~ 1,000 ℃ and isothermal holding time: 20 ~ 500 min). The microstructures of clad metals (as-clads) consist of fine dendrite morphologies and severe microsegregations of the alloying elements (Cr and Si); substrate material (Cu) is clearly confirmed. During the post-clad heat treatment, the microsegregations are totally homogenized, and secondary phases (Cr-based borides and carbides) precipitated during the short-term heat treatment are also almost dissolved, especially at the heat treatment conditions of 950 ℃ for 500 min. Owing to these microstructural homogenization behaviors, an opposite tendency of the surface mechanical properties can be confirmed. In other words, the wear resistance (wear rate) improves from 4.1 × 10^-2 ㎣/Nm (as-clad condition) to 1.4 × 10^-2 ㎣/Nm (heat-treated at 950 ℃ for 500 min), whereas the hardness decreases from 453 HV (as-clad condition) to 142 HV (heat-treated at 950 ℃ for 500 min).

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.29-36
• /
• 2014

Recently, in order to enhance the function and usefulness of products, cladding of dissimilar materials that maximizes the performance of the material is being widely used in all areas of industry as an important process. Clad steel plate, produced by cladding stainless steel plate, an anticorrosive material, on carbon steel plate, is being used to produce pressure vessels. Stainless steel plate has good corrosion resistance, and carbon steel plate has good rigidity and strength; clad steel can satisfy all of these qualities at once. This study aims to find the ${\delta}$-ferrite behavior, mechanical properties, structure change, integrity and reliability of clad steel weld on hot rolled steel plates. For this purpose, multi-layer welding, repair welding and post weld heat treatment were implemented according to welding procedure specifications (WPS). In order to observe the mechanical properties and toughness of clad steel weld zone, post weld heat treatment was carried out according to ASME Sec. VIII Div.1 UW-40 procedure for post weld heat treatment. With heat treatment at $625^{\circ}C$, the hold time was used as the process variable, increased by intervals that were doubled each time, from 80 to 1,280 min. The structure of weld part was typical cast structure; localized primary austenite areas appeared near central vermicular ferrite and fusion line. The heat affected zone showed rough austenite structure created by the weld heat input. Due to annealing effects of heat treatment, the mechanical properties (tensile strength, hardness, impact value) of the heat affected area tended to decrease. From the results of this study, it is possible to conclude the integrity of clad steel welds is not affected much in field welding, repair welding, multi-layer welding, post weld heat treatment, etc.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1369-1375
• /
• 2007

최근 전기통신통신망의 용량은 인터텟, 음성패킷, Audio/Video 스트리밍의 멀티미디어 서비스 수요로 인한 정보통신 용량의 증가에 비례하여 급속히 증가하고 있다. 그 결과 DWDM(Dense Wavelength Division Multiplexing) 기법이 초고속 광통신망에서 추가적인 광섬유망과 고속장비 없이 용량을 증가시키는 해결 방법으로 행하여지고 광학적인 방법이 가능하다는 것이 판명되었다. 따라서, 본 논문에서는 이러한 기능을 갖는 광필터를 설계하기 위하여 광섬유 한쪽의 클래드를 연마하여 다층 슬래브 도파로에 결합시킨 형태의 광섬유/다층 슬래브 결합구조의 광필터를 제안하였다. 광섬유와 슬래브의 분리간격이 $3{\mu}m$일 때 제안된 광필터는 $1.3{\mu}m$의 통신창에서 편광 독립성은 32nm로서 TM 모드와 TE 모드에 대해 중심파장이 각각 ${\lambda}_0=1.274755{\mu}m$와 ${\lambda}_0=1.30591{\mu}m$일 때 0.1 nm의 FWHM(Full Width at Half Maximun) 특성을 가진다.

• 센서학회지
• /
• 제6권5호
• /
• pp.356-361
• /
• 1997

광섬유 소산파 센서(fiber-optic evanescent wave sensor)를 제작하였다. 클래드층을 제거한 광섬유 코아 표면에 anti-mouse immunoglobulin G(IgG)를 결합시키고, 형광이 표지된 mouse IgG와의 반응을 직접적인 방법과 경쟁적인 방법을 통하여 측정하였다. 직접적인 방법과 경쟁적인 방법 모두 $1{\mu}g/m{\ell}$이하의 mouse IgG를 측정할 수 있는 감도를 얻을 수 있었다. Anti-mouse IgG는 단순 흡착 방법에 의하여 광섬유 코아 표면의 93.9%에 고정되었고 비특이적 결합반응을 제거하기 위하여 실시한 소혈청 알부민(bovine serum albumin : BSA)을 이용한 표면 코팅 효과는 없었다. Mouse IgG에 결합된 fluorescein의 비율이 높을수록 형광 발생량이 많았으나 관계는 직선적이지 않았다. 본 연구에서 제작된 광섬유 소산파 센서는 $1{\mu}g/m{\ell}$ 이하의 항원 항체 반응을 소산파 여기에 의한 형광량으로 측정할 수 있어 면역센서로의 응용이 가능할 것으로 판단된다.

• 한국정보통신학회논문지
• /
• 제11권7호
• /
• pp.1359-1366
• /
• 2007

최근 광통신 용량은 VoIP, AUdio/Video 스트리밍의 멀티미디어 서비스 수요로 인한 정보통신 용량의 증가에 비례하여 증가하고 있다. 초고속 광통신망에서 추가적인 광섬유망과 고속장비 없이 이를 해결하기 위한 방법으로 DWDM(Dense Wavelength Division Multiplexing) 기법이 대두되고 있다. 따라서, 본 논문에서는 이러한 기능을 갖는 광필터를 설계하기 위하여 광섬유 한쪽의 클래드를 연마하여 다층 슬래브 도파로에 결합시킨 형태의 광섬유/다층 슬래브 결합구조의 광필터를 제안하였다. 제안된 광필터는 $1.5{\mu}m$ 통신창에서 분리간격이 $4.15{\mu}m$일 때 65nm의 편광 독립성, TM 모드와 TE 모드에 대해 중심파장이 각각 ${\lambda}_0=1.54946\;{\mu}m$와 ${\lambda}_0=1.6144\;{\mu}m$일 때 0.1 nm의 FWHM(Full Width at Half Maximun) 특성을 가진다.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.939-948
• /
• 2012

A 3-ply clad metal consisting of aluminum and copper was fabricated by roll bonding process and the microstructures and mechanical properties of the roll-bonded and post-roll-bonding heat treated Cu/Al/Cu clad metal were investigated. A brittle interfacial reaction layer formed at the Cu/Al interfaces at and above $400^{\circ}C$. The thickness of the reaction layer increased from $12{\mu}m$ at $400^{\circ}C$ to $28{\mu}m$ at $500^{\circ}C$. The stress-strain curves demonstrated that the strength decreased and the ductility increased with heat treatment up to $400^{\circ}C$. The clad metal heat treated at $300^{\circ}C$ with no indication of a reaction layer exhibited an excellent combination of the strength and ductility and no delamination of layers up to final fracture in the tensile testing. Above $400^{\circ}C$, the ductility decreased rasxpidly with little change of strength, reflecting the brittle nature of the intermetallic interlayers. In Cu/Al/Cu clad heat treated above $400^{\circ}C$, periodic parallel cracks perpendicular to the stress axis were observed at the interfacial reaction layer. In-situ optical microscopic observation revealed that cracks were formed in the Cu layer due to the strain concentration in the vicinity of horizontal cracks in the intermetallic layer, promoting the premature fracture of Cu layer. Vertical cracks parallel to the stress axis were also formed at 15% strain at $500^{\circ}C$, leading to the delamination of the Cu and Al layers.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.345-351
• /
• 2012

A three-point bending test was performed on roll-bonded Mg/Al/STS clad-metal plates under two different testing conditions (Mg layer in tension, or STS in tension) and their mechanical response and fracture behavior were investigated. Bending strength was found to be greater under the condition of Mg layer in tension. Heat treatment at $200^{\circ}C$ increased the bending formability, suggesting the interfacial strength increased at $200^{\circ}C$. Under the condition of Mg in tension, the clad heat-treated at $300^{\circ}C$ and $400^{\circ}C$ fractured in two steps, with the first step associated with the interfacial fracture between Mg and Al, and the second the fracture of the Mg layer. STS/Al layers were found to be bent without complete fracture. Under the condition of STS in tension, the clad heat-treated at $300^{\circ}C$ and $400^{\circ}C$ exhibited a very small load drop at the displacement, which is similar to that of the first load drop associated with the interfacial fracture under the condition of Mg in tension. In this case, no interfacial cracks were found and the complete cut-through fracture of clad was observed at low temperature heat treatment conditions, suggesting excellent interfacial strength. When the heat treatment temperature was higher than $300^{\circ}C$, interfacial cracks were observed. The local stress condition and the position of the interface with respect to the surface were found to have a great influence on the fracture behaviors of clad metals.