• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.740-743
• /
• 1995

The analysis model is the power law creep material containing an elliptical rigid inclusion subjected to the arbitrarily directional stress on infinite boundary. The stress analysis is performed using the conformal mapping function and complex pseudo-stress function. The stress distributions near an elliptical rigid inclusion are obtained with various ellipse shapes, strain hardening exponents and directions of applied stress.

• Korean Journal of Materials Research
• /
• v.4 no.3
• /
• pp.349-356
• /
• 1994

For the deformation, life time prediction and improvement of the life time in high temperature materials it's very important to know the mechanism of deformation. For these mechanisms the dislocation loop models of Orlova et al. and Mills et al. are used often now. But they show controversial differencies, even if they have unertaken similar experimental tests with the same alloy of A1-5.5at.% Mg. In this work also the similiar tests of them have done under the same temperature of 573 K ; (1) The specimen was deformed by $\sigma$= 30MPa and $\varepsilon$=0.03. (2) Direct after creep deformation of $\sigma$= 30MPa and $\sigma$= 0.03 the stress reduction tests to 15, 10 and OMPa have been performed. (3) To study the loop models dislocation structure and dislocation density ( p ) have been observed.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.05a
• /
• pp.401-402
• /
• 2004

생분해성 고분자 재료들은 지구환경 보호측면에서 다양한 분야, 즉, 1회용 재료, 농업용 필름 및 생체적합성 재료(약물 방출, 봉합사) 등에서 실용화되거나 활발한 연구가 진행되고 있다. 이들 재료의 상업적응용은 물성, 분해능, 제조가격, 대량생산 등에 의해 좌우 될 수 있다. 이들 중 특히, 분해 메커니즘의 규명은 본질적인 응용에서 가장 중요한 위치를 차지하고 있다. 분해 속도의 규명 및 조절은 제품의 수명을 제어할 수 있고 응용 분야를 넓힐 수 있다. 본 연구에서는 분해매채에 따른 생분해성 고분자의 분해 메커니즘 및 속도를 단결정과 단분자막 기법을 이용하여 연구하였다. 결정성영역에서는 분해매체의 크기가 작은 알칼리 이온에 의해 표면 및 측면 분해가 일어나고 크가가 큰 효소는 비규칙성을 가진 영역에서 선호적 분해가 일어남을 두 모델 시스템으로부터 확인하였다.

• Clean Technology
• /
• v.19 no.3
• /
• pp.243-248
• /
• 2013

Thermally conductive materials are widely used in various applications where effective heat dissipation is required. Graphene shows high potential for various uses owing to high electrical conductivity, good mechanical strength, and high thermal conductivity. Generally previous works used organic solvents are generally used for the dispersion of graphene in fabrication procedure. In order to achieve clean fabrication it is required to use water media. In this study, we fabricated graphene attached poly(methyl methacrylate) (PMMA) microsphere via microfluidic method. With the aid of surfactant, graphene was well dispersed in water which was used as continuous flow. Thermal conductivity was improved with the small amount of graphene addition and this indicate potential use of this system for thermally conductive composite material.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1455-1461
• /
• 1991

본 연구에서는 Kachanov의 재료손상(material damage)모델을 이용하여 새로운 수명예측식을 만들고, 이 수명예측식의 타당성을 조사하기 위하여, 최근에 발표된 크 립 수명과 기공분포와의 실험결과와 비교하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.21-27
• /
• 2003

The copolymers with various composition of methyl methacrylate (MMA), ethyl methacrylate (EMA), methacrylic acid (MA) and hydroxyethyl methacrylate (HEMA) were synthesized for capacitive humidity sensitive materials. The capacitive humidity sensor consisted of a polymethacrylate film coated on both sides with gold electrode. Capacitance versus relative humidity increased with HEMA content in the copolymer. In the case of self-crosslinkable MMA/MA/HEHA= 40/10/10, the average capacitance at 30%RH, 60%RH and 90%RH are 102, 134 and 166 pF, respectively. And also, the hysteresis, temperature cycle and long-term stability were evaluated as a capacitance humidity sensor.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.89-96
• /
• 2018

Purpose: The aim of this study was to evaluate the effect of delayed time, surface treatment, and repair materials on repair of bis-acryl composite resin through comparison of shear bond strength and to evaluate the utility of bis-acryl composite resin repair using polymethyl methacrylate resin. Materials and Methods: A total of 90 bis-acryl composite resin specimens were fabricated and classified into 9 test groups, each of 10 pieces according to delayed time, surface treatment and repair material. The shear bond strength of each specimen was measured using a universal testing machine immediately after fabrication and analyzed using a statistical analysis program (IBM SPSS statistics 20). After the shear bond strength measurement, the fracture surface of the specimen was observed. Results: The highest shear bond strength ($17.54{\pm}3.14MPa$) was observed in the experimental group bonded immediately with a light-curing flowable composite resin using a bonding agent. Conclusion: When repairing bis-acryl composite resin, it is necessary to consider whether to remake according to the delayed time. For effective repair, it is desirable to consider appropriate materials and surface treatment methods according to the site or purpose of use.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.408-415
• /
• 1998

The analysis model is the power law creep material containing an elliptical rigid inclusion subjected to the arbitrarily directional stress on infinite boudary. The stress analysis is performed using the conformal mapping function and complex pseudo-stress function. The stress distributions near an elliptical rigid inclusion are obtained with various ellipse shapes, strain hardening exponents and directions of applied stress.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.85-86
• /
• 1997

1. 서론 : Nanofiltration(NF)은 분자량이 200-1000인 유기물과 음이온 및 다가 이온등을 일가 이온으로부터 선택적으로 분리함으로써 유기물의 농축과 이온의 선택적인 분리를 동시에 행할 수 있는 분리 공정이며, 순수의 제조, 과일과 야채주스의 농축, 저알콜 맥주와 와인의 제조, 낙농 산업에서 유제품의 농축, 섬유공업에서 염료와 이온의 분리 및 제지공업의 폐수 처리 등에 응용되고 있다. NF용 막재료로는 셀룰로오스 계열의 고분자나 폴리아미드, 폴리술폰, PAN등이 연구되어 왔으며 최근에는 친수성이 좋고 가교를 하지 않고도 이온 결합에 의하여 강도를 유지할 수 있다는 아이오노머의 성질을 이용하여 아이오너마를 Nanofiltration용 막재료로 이용하려는 연구가 이루어지고 있다.[1-3] 그러나 아이오노머의 미세구조와 유기물의 분리특성간의 관계에 관한 연구는 미흡한 실정이다. 따라서 본 연구에서는 분리막의 성형성을 향상시키고자 알킬메타크릴레이트가 도입된 아이오너머를 합성하고 알킬기의 길이나 이온의 함량 등 고분자의 구조에 따른 아이오노머막의 분리특성을 연구하여 아이오노머막의 NF용막으로서의 응용가능성을 살펴보았다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.157-160
• /
• 2000

In author's previous paper, a finite element algorithm was presented to calculate the buckling and crippling stresses of composite laminated stringers. In this study, for the validation of the finite element analysis, Z-section composite stringers of different lengths and flange-widths were tested in axial compression. The stacking sequence of graphite/epoxy is [$\pm$45/0/90]s. Strain gages were attached to each specimen to get the strain response. Deflection and end-shortening were obtained by a displacement transducer. The buckling and crippling loads are determined from the strain response, load vs. end-shortening curves, and load vs. out-of-plane deflection curves. Comparison between finite element and experimental results shows good agreement in the buckling, local buckling, and crippling stresses.