• 제목/요약/키워드: 콤

검색결과 283건 처리시간 0.024초

DICOM 표준 영샹을 위한 이미지 기반의 주석 (An Image-Based Annotation for DICOM Standard Image)

  • 장석환;김회율
    • 한국멀티미디어학회논문지
    • /
    • 제7권9호
    • /
    • pp.1321-1328
    • /
    • 2004
  • 본 논문에서는 DICOM 영상 내에 이미지 기반의 주석을 생성/삽입할 수 있는 새로운 DICOM 객체를 제안한다. 본 논문에서 제안한 주석 처리 방법은 이미지 자체를 주석으로 사용하기 때문에 사용자가 입력한 다양한 형태의 정보(문자, 스케치, 그림)를 주석 내에 쉽게 저장할 수 있다. 주석 영상은 원 영상과는 독립적으로 저장/관리 되기 때문에 원 영상에는 전혀 영향을 주지 않고 삽입/추가/변경 등이 가능하다. 또한, 제안된 주석은DICOM영상 내에 직접 저장되기 때문에 PACS/EMR이 설치되어 있지 않은 중소 병원에 매우 유용할 것으로 기대된다.

  • PDF

영구자석 매입형 브러시리스 직류 전동기용 센서리스 드라이브 개발에 관한 연구 (Development of a Sensorless Drive for Interior Permanent Magnet Brushless DC Motors)

  • 여형기;홍창석;이광운;박정배;유지윤
    • 전력전자학회논문지
    • /
    • 제2권3호
    • /
    • pp.44-50
    • /
    • 1997
  • 본 논문은 영구자석 매입형 브러시리스 직류 전동기를 회전자 위치 센서 없이 구동하는 센서리스 드라이브의 개발에 관한 연구이다. 영구자석 매입형 전동기는 회전자의 위치에 따라 각 상의 인덕턴스가 크게 변화한다. 회전자의 위치를 간접적으로 검출하기 위해 인덕턴스 변화에 따른 단자전압 파형의 특성을 분석하고 이에 적합한 회전자 위치 간접검출 방법을 제시하였다. 또한 87c196mc 원 칩 마이크로프로세서를 이용하여 실용적이고 경제성 있는 센서리스 드라이브를 제작하여 에어콘 콤프레서의 구동에 적용하였다. 제시된 실험 결과는 본 연구에서 제안한 간접검출 방법의 타당성과 개발된 드라이브의 유용성을 보여준다.

  • PDF

에폭시/구상실리카 콤포지트의 전기적 절연파괴 및 인장 강도 특성 연구 (A Study on Electrical Insulation Breakdown and Tensile Strength for Epoxy/Spherical Silica Composites)

  • 이승훈
    • 한국전기전자재료학회논문지
    • /
    • 제26권10호
    • /
    • pp.726-730
    • /
    • 2013
  • In order to develop a high voltage insulation material, spherical silicas with two average particle sizes of 5 ${\mu}m$ and 20 ${\mu}m$ were mixed in different mixing ratios (1:0, 0.7:0.3, 0.5:0.5, 0.3:0.7, 0:1) and their total filling content was fixed at 65 wt%. In order to observe the dispersion of the spherical silicas and the interfacial morphology between silica and epoxy matrix, field emission scanning electron microscope (FE-SEM) was used. The electrical insulation breakdown strength was estimated in sphere-plate electrodes with different insulation thicknesses of 1, 2, and 3 mm. Electrical insulation breakdown strength decreased with increasing mixing ratio of 5/20 ${\mu}m$ and the thickness dependence of the breakdown strength was also observed. The tensile strength of the neat epoxy was 82.8 MPa as average value and its increased with decreasing particles size and that of epoxy/silica (2 ${\mu}m$) was 107 MPa, which was 130.8% higher value.

표면개질된 나노알루미나를 혼합한, 에폭시/마이크로-나노알루미나 콤포지트의 열적특성 (A Study on the Thermal Properties of Epoxy/Micro-Nano Alumina Composites, as Mixture of Surface Modified Nano Alumina)

  • 박재준
    • 전기학회논문지
    • /
    • 제65권9호
    • /
    • pp.1504-1510
    • /
    • 2016
  • The aim of this study is to improve properties both glass transition temperature($T_g$) and coefficient of thermal expansion(CTE) using epoxy/micro-nano alumina composites with adding glycerol diglycidyl ether (GDE:1,2,3,5g). This paper deals with the effects of GDE addition for epoxy/micro alumina contents (40, 50, 60wt%)+surface modified nano alumina(1_phr) composites. 20 kinds specimen were prepared with containing micro, nano alumina and GDE as a micro composites(10, 20, 30, 40, 50, 60, 70wt%) or a nano/micro alumina composites(1phr/40, 50, 60wt%). Average particle size of nano and micro alumina used were 30nm and $1{\sim}2{\mu}m$, respectively. The micro alumina used were alpha phase with Heterogeneous and nano alumina were gamma phase particles of spherical shape. The glass transition temperature and coefficients of thermal expansion was evaluated by DSC and TMA. The glass transition temperature decreased and coefficients of thermal expansion become smaller with filled contents of epoxy/micro alumina composites. On the other hand, $T_g$ and CTE as GDE addition variation(1,2,3,5g) of epoxy/micro-nano alumina composites decreased and increased respectively.

표면처리된 나노알루미나가 첨가된 에폭시/멀티-알루미나 콤포지트의 교류절연파괴 특성 (The AC Insulation Breakdown Properties of Epoxy/Multi-Alumina Composites for Adding Surface Modified Nano Alumina)

  • 박재준
    • 전기학회논문지
    • /
    • 제65권9호
    • /
    • pp.1511-1517
    • /
    • 2016
  • The aim of this study is to improve of properties for electrical AC insulation breakdown strength using epoxy/micro-nano alumina composites with adding glycerol diglycidyl ether (GDE:1,3,5g). This paper deals with the effects of GDE addition for epoxy/micro alumina contents (40,50,60wt%)+surface modified nano alumina(1_phr) composites. 14 kinds specimen were prepared with containing epoxy resins, epoxy micro composites and epoxy nano-micro alumina mixture composites. Average particle size of nano and micro alumina used were 30nm and $1{\sim}2{\mu}m$, respectively. The micro alumina used were alpha phase with Heterogeneous and nano alumina were gamma phase particles of spherical shape. The electrical AC insulation breakdown strength was evaluated by sphere to sphere electrode system and raising velocity 1kV/s. The AC breakdown strength decreased insulation properties of multi-composites according to increasing micro alumina and GDE addition contents.

부하개폐 시험시 부하조건에 따른 과도회복전압 연구와 수명예측 (Study of transient recovery voltage according to condition of load circuit and extraction of life estimate)

  • 오준식;김명석;한규환;박종화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
    • /
    • pp.452-453
    • /
    • 2006
  • 저압 개폐기는 에어컨, 냉동기, 쇼케이스, 산업용 청소기, 전기 온수기, 건조기, 공조기, 펌프, 콤프레셔 등의 모터제어 및 히터와 조명기기의 개폐 등에 광범위하게 이용되는 개폐장치이다. 저압 전자개폐기는 수 천회에서 수백만회까지 빈번한 개폐사용조건으로 인해 시험규격에서는 개폐시험을 통해 수명을 검증하도록 되어 있다. 이 개폐시험 회로는 규정된 전압, 전류, 역률 조건을 맞추기 위해 저항과 리액터를 직렬 연결하여 구성한다. 또한 모터와 같은 리액터 부하를 개폐하는 개폐기의 경우는 전류차단 순간 과도회복전압의 피크비와 주파수를 규정하여 적용하고 있다. IEC60947-1에서는 과도회복전압의 피크비와 주파수에 대한 규정값을 제시하고 있으며 제시된 값을 제어하기 위한 회로를 제시하고 있다. 과도회복전압의 피크비와 주파수는 개폐기 접점의 절연성능과 밀접한 관계가 있으며 수명에 치명적인 영향을 미친다. 본 연구에서는 LS산전(주) 부하개폐시험 회로의 과도회복전압 조건과 영향을 설명하고 제어하기 위한 저항과 커패시터를 적용하는 방법을 제안하고자 한다.

  • PDF

토끼에서 norfloxacin의 경구 및 정맥 투여시 체내 동태 (Pharmacokinetic profiles of norfloxacin after intravenous and oral administration in the rabbits)

  • 박승춘;윤효인;오태광;조준형
    • 대한수의학회지
    • /
    • 제35권4호
    • /
    • pp.683-689
    • /
    • 1995
  • 임상적으로 건강한 New Zealand White 종인 수컷 토끼에서 항생제 norfloxacin(NFX)의 체내 동태를 조사하기 위하여 체중 kg당 5mg을 정맥 및 경구 투여하였다. 그 결과 빠른 분포기와 소실기를 갖는 2-콤파트먼트 모델 양상으로 나타났다. 혈장에서의 약물분석은 HPLC로 실시하였는데, 이동상은 acetonitrile/0.01M phosphate buffer/ 10% citric acid 1mM heptane sulfonic acid(10/70/20)이었고, 흡수 파장은 274nm에서 실시하였다. 정맥 투여후, 생물학적 반감기는 3.14시간으로 나타났으며, 분포반감기는 0.38시간으로 빠른 분포를 보여주었다. 최고 혈중농도는 $24.27{\mu}g/ml$로 계산되었으며 청소율은 0.68ml/kg/h로 분석되었다. 경구 투여후, 최고 혈중 농도와 최고 혈중 도달 시간은 $0.86{\mu}g/ml$과 0.43시간으로 각각 계산되었다. 이때의 생물학적 반감기는 3.61시간으로 정맥 투여시와 유의성 있는 차이는 없었으며, 흡수 반감기는 0.17시간으로 빠른 흡수를 보여주었다. 생체이용율은 30%로 나타났으며, 0.2-1.6g/ml인 치료혈중 농도 범위에서 혈장 결합율은 26%로 나타나, 토끼에서 항생요법은 구강 투여시 초기 투여량은 2.71mg/kg이며, 유지 투여량은 12시간마다 2.54mg/kg이 적당한 것으로 분석되었다.

  • PDF

COFDM 전송기술을 이용한 Wireless 카메라영상 전송시스템 연구 (A Wireless Camera Image Transmission System)

  • 김준원
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.89-96
    • /
    • 2010
  • 본 논문은 방송현장에서 TV중계차와 EFP카메라 또는 ENG카메라간의 카메라 케이블 연결이 방송프로그램 제작시 여러가지 장애물과 거리에 한계가 있어 자유로운 카메라 촬영활동에 불편을 주고 있는바, DVB-T방송에서 사용하는 무선영상 전송장치와 수신장비를 제작하여 본 연구에 응용하는 사례로, 야외는 물론 실내에서도 카메라 촬영활동이 자유스러운 "Wireless 카메라 영상전송 시스템"의 개발을 목표로 하였다. 본 연구는 연구접근이 용이한 아날로그 콤포지트 영상신호 출력을 갖는 카메라와 이 영상신호를 압축하는 MPEG-2시스템, COFDM 전송방식을 이용하는 영상전송시스템으로 제작실험하게 되었으며, 그 결과 영상 및 전송장치에 대하여 양호한 QoS값을 얻게 되었으며, 본 실험을 통해 TV방송제작 현장의 활용은 물론, 무선 CCTV 장치산업의 적용 할 수 있는 가능성을 갖게 되었다.

저치환율 모래다짐말뚝에 의한 복합지반의 응력분담거동에 대한 실험적 연구 (Experimental Study on Stress Sharing Behavior of Composition Ground Improved by Sand Compaction Piles with Low Replacement Area Ratio)

  • 유승경
    • 한국지반공학회논문집
    • /
    • 제19권5호
    • /
    • pp.253-261
    • /
    • 2003
  • 샌드드레인공법(SD공법)이나 고치환율의 샌드콤팩션파일공법(SCP공법)과 비교하여 저치환율SCP공법에 의해 개량된 복합지반의 역학거동은 모래말뚝과 점토지반 양방의 역학적 상호작용의 영향을 보다 현저하게 받는다. 따라서 본 공법의 적용에 있어서 침하저감효과나 모래말뚝 사이의 점토의 강도증가 등을 정확히 평가하기 위해서는 복합지반 내부에서의 모래말뚝과 점토와의 역학적 상호작용을 해명하여야 할 필요성이 있다. 본 연구에서는 저치환율의 모래말뚝이 타설된 복합지반에 대한 일련의 모형실험을 통하여 압밀중에 발생되는 모래말뚝과 점토 각각의 역학거동과 복합지반 내부에 대한 응력분담거동에 대하여 고찰하였다.

고전압 전력기기응용을 위한 에폭시-나노콤포지트의 전기장 분산기술연구 (A Study on Electric Field Dispersion Techniques of Epoxy-Nanocomposites for Application of High Voltage Power Apparatus)

  • 이창훈;김효철;조영화;김현;정훈;박재준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.97-97
    • /
    • 2010
  • A new electric application method was developed to prepare epoxy/organoclay nanocomposite for the electrical insulation in the AC electric fields and it could be also used in the field of various viscous polymer/organoclay systems. The applied AC electric field condition was as follows; (1) inter-electrode distance: 40 mm, (2) application voltage: 3-11 kV, (3) frequency: 60~1,000 Hz, and (4) application time: 0~60 min. To characterize the epoxy/clay nanocomposite, WAXS and TEM analyses were confirmed. In order to explain how the organic modifier affects the exfoliation phenomena, a mechanism of the oscillating collision of the quaternary ammonium head was proposed and the effects of the AC voltage and frequency and the organoclay content were studied.

  • PDF