• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.280-283
• /
• 1995

In centrifugal barrel finishing, it is easy to establish the optimum working conditions for different workpieces. As they are adjusted in trial and error practically, production efficiency and quality are some- times low In the present paper, firstly, installation of the barrel finishing machine, finishing purpose and working conditions have been analyzed in order to eliminate the defects of the finished surface. Secondly, on the basis of this result, quantity of the water and selection of the media and the compound, etc. have been investigated. As a result, production efficiency and quality have been improved under the specified optimum working conditions. In addition, durability of the media and the compound has been tested experimentally. As a result, it was found that the expected life of the media is about 85 hrs and that of the compound is about 5 hrs. Besides high quality control has been achieved by newly proposed inspection at regular intervals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.91-92
• /
• 2007

저압 개폐기는 에어컨, 냉동기, 산업용 청소기, 전기온수기, 공조기, 펌프, 콤프레션 등의 모터제어 및 히터와 조명기기의 개폐 둥에 광범위하게 이용되는 개폐장치이다. 저압 전자개폐기는 수 천회에서 수백만회까지 빈번한 개폐 사용조건으로 인해 시험 규격에서는 개폐시험을 통해 제품의 수명을 검증하도록 되어 있으며 과다한 시간이 소요된다. 따라서 시험 시간을 단축하기 위한 가속수명 시험이 필요하게 되었으며 가속 스트레스인 과도 회복전압(TRV)의 피크비율(factor ${\gamma}$) 변화에 따라 저압개폐기의 전기적 수명 시험을 실시하였으며 시험결과를 바탕으로 가속 수명 시험을 하기 위한 가속계수를 산출하였다.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1463-1470
• /
• 2018

In this study, 20 types of samples were prepared by mixing different kinds of inorganic materials to develop insulation materials for epoxy - based GIS substation equipment used under high voltage environmentally friendly insulation gas. One of the electrical characteristics, AC insulation breakdown experiment was performed. As mixing ratio of mixed heterogeneous inorganic materials, the dielectric breakdown strength was increased with increasing filler ratio of micro silica, micro silica : micro Alumina, 1:9, 3:7, 5:5, 7:3, 9:1, and decreased as the filling amount of micro alumina increased. The AC insulation breakdown characteristics were the best when the composition ratio was 9:1. The higher the content of silica, the better the interfacial properties, and the larger the alumina content ratio, the worse the interfacial properties.

• 대한전자공학회논문지
• /
• 제9권2호
• /
• pp.24-35
• /
• 1972

한 회로에서 각 트랜지스터의 파라미-터를 한장의 카아드에 한꺼번에 수용할 수 있게 하기 위하여 ECAP 콤파일러·프로그램을 수정하였다. 이로서 트랜지스터의 베이스, 에밋터 및 콜랙터에 관한 모든 파라미-터가 한꺼번에 입력되고 따라서 상호관계 재확인을 위해서 여러 써브·루우틴을 거칠 필요도 없어진다. 베이스 및 콜랙터등 2개의 브랜치·카아드와 상호관계를 나타내는 카아드 대신, 하나의 카아드로서 입력시킬 수 있으므로 상당히 머신타임(Machine time)이 절약되고, 한편 트랜지스터 회로에서 등가회로로 옳겨 각 브랜치와 노-드를 번호 붙일 필요없이 직접 데이타·카아드(회로를 나타내는)를 작성할 수 있게 되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.98-98
• /
• 2010

A epoxy/multilayered silicate nanocomposite was prepared by a new AC electric application method and micro silica particle was poured into the nanocomposite in order to prepare epoxy/micro-and-nano- mixed composites (EMNC). Electric insulation breakdown strength was measured in a sphere-sphere electrode system designed for the prevention of edge breakdown and the data were estimated by Weibull plot. As the exfoliated silicate nano-plates were homogeniously dispersed in the micro silica particles, the insulation property was higher.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.31-31
• /
• 2010

Nano particles (10nm $SiO_2$) were silane-treated in order to modify the surface characteristics in a epoxy nanocomposite. Then, micro particles ($3{\mu}m$ SiO2) were poured into the epoxy nanocomposite using various mixing process and epoxy/micro-and-nanomixed composites (EMNC) were prepared. The thermal (Tg) and mechanical (tensile and flexural strength) properties were measured by DSC, DMA and UTM and the data was estimated by Weibull plot.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.30-30
• /
• 2010

In order to prepare a epoxy/multilayered silicate nanocomposite, various mixing processes were tried and it was found that the silicate could not be fully exfoliated in the epoxy matrix through various mechanical mixing process. In this study, a new AC electric application method was developed to prepare epoxy/multilayered silicate nanocomposite. The exfoliation of the silicate was confirmed by XRD (X-Ray Diffraction) and TEM observation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.32-32
• /
• 2010

A epoxy/multilayered silicate nanocomposite was prepared by a new AC electric application method and micro silica particle was poured into the nanocomposite in order to prepare epoxy/micro-and-nano- mixed composites (EMNC). Electric insulation breakdown strength was measured in a sphere-sphere electrode system designed for the prevention of edge breakdown and the data were estimated by Weibull plot. As the exfoliated silicate nano-plates were homogeniously dispersed in the micro silica particles, the insulation property was higherd.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.84-84
• /
• 2010

Nano particles (10nm SiO2) were silane-treated in order to modify the surface characteristics in a epoxy nanocomposite. Then. micro particles ($3{\mu}m$ SiO2) were poured into the epoxy nanocomposite using various mixing process and epoxy/ micro-and-nano- mixed composites (EMNC) were prepared. The thermal (Tg) and mechanical (tensile and flexural strength) properties were measured by DMA and UTM and the data was estimated by Weibull plot.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.83-83
• /
• 2010

This study investigates the thermal and mechanical properties of insulation elements through mixing epoxy based micro- and nano particles. Regarding thermal properties, DSC and DMA were used to calculate crosslinking densities for various types of insulation elements. In a mechanical property of bending strength, shape and scale parameters were obtained using the Weibull plot. This study obtained the most excellent results of scale parameters, such as Vol 3.2%, in the bending strength of EMNCs.