• Magazine of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.33-39
• /
• 2002

레미콘의 품질성능을 좌우하는 것은 콘크리트 사용재료 및 배합뿐만 아니라 레미콘을 제조하는 믹서 및 이를 현장까지 운반하는 트럭 에지테이터의 품질성능에 크게 좌우된다. 그러나, 레미콘 공장의 혼합 설비인 믹서 및 트럭 에지테이터에 관한 국내 자료는 거의 전무한 실정이며 이에 관한 연구도 상대적으로 매우 부족하다. 특히, 최근에는 고강도 콘크리트, 고유동 콘크리트, 고강도 경량 콘크리트, 수중불분리 콘크리트, 섬유보강 콘크리트 등 고성능 콘크리트 성능에 대한 요구가 날로 증가하는 추세이며 이에 따라 레미콘 공장에서도 혼합설비 및 운반설비가 고성능화 되어 가는 추세이다.(중략)

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2012

Recently, due to developments in construction technology, the use of high-performance concrete became popular. High-performance concrete when compared to the ordinary concrete can better satisfy required performances by using mineral admixture and superplasticizer. Various studies on the effect of admixture materials on the quality of high-performance concrete have been reported. But there exist limited number of reported results on the effect of cement qualities, which is the most important constituent material in concrete. Therefore, in this study, the relationship between the quality of cement and the flowability of high flowing concrete is investigated. Qualities of domestically produced cement were identified, and then the influence of the qualities of cement on the flowability of high flowing concrete is evaluated. The result showed that the dosage of required superplasticizer was dependent on cement fineness, to brain, free-CaO, and interstitial phase, which all trigger initial hydration process of cement. Particularly, the results showed that fineness of cement has a high impact on the dosage of the superplasticizer. For strength property of concrete, the dosage of superplasticizer had a significant effect on the early age strength, but had negligible effect in the long term strength.

• Resources Recycling
• /
• v.18 no.3
• /
• pp.20-26
• /
• 2009

The objective of this study is to investigate the properties of fresh concrete with recycled coarse and fine aggregates. Four different kinds of aggregate with natural, recycled aggregates were prepared. The concrete mixtures were produced with test parameters of replacement ratio of recycled aggregate. The properties of the fresh concrete were measured by means of slump and air content according to elapsed time. Quality control method to maintain the constant total mixing water for recycled aggregate concrete was suggested. The all concrete mixtures were produced with approximately the same slump on the job site after an hour. Test results indicated that compressive strength of concrete with constant slump is not affected by the replacement ratio of recycled aggregate. Also the practical way for the quality control of recycled aggregate concrete is to maintain the constant total mixing water.

• Journal of the Korean Professional Engineers Association
• /
• v.1 no.4
• /
• pp.9-15
• /
• 1968

콘크리트 공사시방에 있어서 강도 최저강도를 지정하는 것이 오늘날 까지의 관습으로 되어있다. 즉, 몇개의 강도시험의 평균치가 얼마이상 이어야 된다든가, 전부의 콘크리트가 얼마 이상의 압축강도를 갖어야 된다든가, 또는 콘크리트는 28일 압축강도 얼마를 낼 수 있도록 콘크리트 단위용 적당 cement를 몇 kg, 혹은 몇 포대를 사용해야 된다 든가로 규정되는 것이 보통으로 되여 있다. 그러나 이 방법만으로는 그 콘크리트의 실제의 안전율을 예측할 수 없을뿐만 아니라 균질한 콘크리트를 얻는것을 기대할 수가 없을 것이다. 즉 합리적인 시방이 되지 못 한다. 두말 할 것도 없이 우리는 현장에서 건축물설계자가 요구하는 강도의 콘크리트를 얻어야 될 것이고, 또 한편으로 그 강도가 골고루 되어야 할 것이다. 즉 강도의 변화가 심하지 않아야 될 것이다. 이것을 기대하기 위하여 concrete 제조현장에서 통계학적 이론에 입각한 품질관리를 행하는 것이다. 그렇게 하므로서 보다 합리적인 시방이 이루어지게 된다. 현재 미국에서는 콘크리트 공사의 큰 현장에서 concrete 생산 품질관리를 행하고 있는 것으로 안다. 그러면 여하한 이론에 입각하여 현장에서 다량으로 concrete를 생산할때에 그 품질을 관리하느냐 하는 것을 현재 미국에서 propose 되여 있는 안과 ASTM에 규정되여 있는것을 중심으로 소개하고 아울러 concrete 공사에서 강도에 관한 시방을 앞으로 이끄러, 나갈 방향을 제시하고저 한다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.67-75
• /
• 2013

Recently, the interest is increasing about the exposed concrete, accordingly, exposed concrete is expanding the use. However, concrete structures is difficult to apply the general concrete for exposed concrete, due to complex section and compact reinforcement, increasingly. Therefore, in this paper, for application of high fluidity concrete as exposed concrete, exposed high fluidity concrete using fly ash and lime stone powder was manufactured and observed quality property(fluidity properties, mechanical properties and Surface Properties) of exposed high fluidity concrete. The experiments are based on the OPC and LSP10, was evaluated Impact on the quality of concrete according to mixing ratio of FA(0, 10, 15 and 20). As a result, fluidity properties, mechanical properties and Surface Properties of exposed high fluidity concrete were satisfied to requirement conditions, fluidity and surface finishability was improved depending on mix of fly ash and limestone powder. Through this, we utilize of basic research data for development of high fluidity concrete for exposed concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.349-350
• /
• 2009

According to result of this study on quality improvement of fly ash concrete using activator, fly ash concrete using activator was improved compression strength without a change of fresh concrete properties.

• Magazine of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.82-86
• /
• 2016

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.4
• /
• pp.193-205
• /
• 2008

Quality is an important keyword representing the corporate competitiveness and image in today' s construction industry. Especially in concrete construction, any problems or defects in fresh concrete can significantly degrade the entire quality and performance of the facility built. Thus, adequate quality inspection and testing must be exercised over the fresh concrete, if concrete with the required strength, durability and appearance is to be obtained. The testing of concrete delivered to the construction job site involves testing of fresh concrete and performing strength tests on hardened concrete. The principal tests conducted on fresh concrete include the slump test and tests for air and salt content. The temperature of fresh concrete should be checked out hot or cold weather concreting. The 7-day and 28-day strength of hardened concrete are also determined by compression tests on usually cylinder samples. However, it is very complex and time-consuming process requiring a lot of efforts to document those on-site concrete testing results and to accumulate their historical data. The primary objective of this study is to suggest a unique PDA and web-based system which enables an on-site quality manager to effectively conduct the concrete inspection and testing, automatically document and accumulate the collected historical data, and promptly obtain the approval from supervisors. Finally, it is anticipated that the effective use of the proposed PDA and web-based system would be able to improve reliability of the concrete quality inspection and testing data as well as significantly reduce the approval process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.617-620
• /
• 2008

When fresh concrete is exposed to the cold weather, the concrete may happen frost damage because of freezing at early ages and the strength development may be go down. Therefore, this paper is intend to investigate the properties and availabilities of cold weather concrete using anti-freeze based formate-acetate for ensure of excellent concrete quality on cold temperature. According to test result for concrete in anti-freeze agent, strength properties in sub-zero temperature increases in comparison with concrete of non anti-freeze agent without decline of strength until later age. When anti-freezing agent is added by 3.0% to binder, it gives good effects on the performance of the fresh and harden concrete.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.229-236
• /
• 2006

Recently, the use of crushed sand produced by the crushing of stone is continuously increasing to reach an utilization rate of about 20% of the whole fine aggregates that is foreseen to grow larger in the future. However, the lack of recognition concerning quality during the production of crushed sand results in the use of crushed sand that do not satisfy the KS F 2527 standard during the manufacture of concrete. And, studies investigating the effects of such crushed sand on concrete are still neglected. Therefore, this study intends to provide data that can be exploited for concrete using crushed sand through the analysis of the effects of the grain shape of crushed sand on the quality of concrete. Results revealed problems in the workability, air entraining and durability for a value of 53% for the solid volume percentage for shape determination specified by the current KS F 2527. Analysis showed that the adjustment of the solid volume percentage for shape determination from the currently specified 53% to 55% will improve the quality of concrete using crushed sand in high strength concrete particularly.