• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.145-152
• /
• 2010

Most wearable system for mobile healthcare applications consists of three parts. The first part is the sensing elements based on bio-signal, the second is the circuit module for control, data acquisition and wireless communication and control and the third is garment with a built-in electrodes and circuits. The existing healthcare garment systems have to find a solution to signal-wire and uncomfortable and inappropriate electrode to long-term attachment. Even if the wireless communication is used for healthcare garment system, the interface between sensors and circuits have to use wires. To solve these problems, this paper use electrode using PEDOT coated PVDF nanoweb for ECG signal and PVDF film sensor for respiratory signal. And, we constructed garment network using digital yarn of 10um, and transmitted ECG and respiratory signal to mobile phone through the integrated circuit with bluetooth called station To evaluate feasibility of the proposed mobile healthcare garment system, we experimented with transmission and measurement of ECG and respiratory signal using nanoweb electrode and digital yarn. We got a successful result without noise and attenuation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.425-428
• /
• 2013

In this paper, we present a novel hydrophilic coating material (Wellture Finetech, Korea) which can be utilized as a coating layer for anti-contamination for electrical and electronic system. The coating material was deposited on 4 inch silicon wafer with several different film thickness. The film thickness was controlled by spin coating speed. After curing of the film, we have scratched by permanent marker to check self-cleaning property of the film. Also we have executed several mechanical tests of the films. As the spin coating speed is increased, the film thickness was thinned from 230 nm to 125 nm. Contact angle of the film was lowered from $30^{\circ}$ to $12^{\circ}$ as the spin coating speed is increased from 700 to 2,500 rpm. On permanent marker scratched film surface coated at 1,000 rpm, we have poured regular city water to investigate self cleaning property of the film. The scratches were gradually separated from the film surface due to super-hydrophilicity of the film. Hardness of spin coated film was 9H measured by ASTM D3363 method. and adhesion of all film was 5B tested by ASTM D3359 method. Also, to get exact hardness value of the film, we have utilized a nano-indenter. As spin speed is increased, the hardness of film was increased from 3 GPa to 5 GPa.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.467-472
• /
• 2009

Ultraviolet curable coating solution was prepared with poly(ethylene glycol) acrylate oligomer and various mono and multi-functional acrylate monomers. The optical properties of UV cured coating layer on PET film with acrylate coating solution containing metal oxides, such as fumed silica and alumina, were also investigated to reduce light reflection on films. Poly(ethylene glycol) diacrylate which has 575 of average molecular weight was used as oligomer acrylate, and pentaerythritol triacrylate and dipentaerythritolpenta-/hexa acrylate were used as multi-functional acrylate monomers. Also, butyl acrylate was used to improve the adhesion as well as to reduce glass transition temperature to give a better flexability. 1-hydroxy cyclohexyl phenyl ketone was used as photoinitiator. We found out the metal oxides in acrylate coating solution showed a homogeneous dispersion from energy dispersive spectroscopy data. Transmittance and light reflection of coated PET film was measured with UV/vis spectrometer and gloss meter, respectively. When 1.00 g of both metal oxides was added into coating solution, the transmittance and the glossiness were reduced from 90% to 30% and from 190 GU to 35 GU, respectively. However, adding up to 1.00 g of the metal oxide into coating solution did not affect on the hardness of coating layer and adhesion between coated layer and PET film. Conclusively, we can control transmittance and light reflection of coated film by adjusting the amounts of metal oxide in coating solution.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.49-52
• /
• 2008

Structural Wood is developed by purpose to make efficient use of wood resources. The biggest advantage of structural wood is stable as strength is high than wood product that is used by structure in existing. Order manufacture according to design details is available. It Is used to main structure elements to large spatial structure. Structure wood kind utilizes Glulam, prefabricated wood I-joists and laminated veneer lumber(LVL) and so on. Structural Design and construction of Open-air Stage Roof Structure is described in the presented paper. Architectural roof materials is used to PVF/PFLT membrane. Column and diagonal members is used to steel members(SS400), and Cantilever beam is used to Glulam assembled with different Grade laminations(10S-28B).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.5
• /
• pp.517-521
• /
• 2012

Carbon nanotubes (CNTs) have been regarded as a promising material for the fabrication of flexible conductors such as transparent electrodes, flexible heaters, and transparent speakers. In this study, a multiwalled carbon nanotube (MWCNT) film was deposited on a polyethylene terephthalate (PET) substrate using a spraying technique. MWCNTs were dispersed in water using sodium dodecyl sulfate (SDS). To evaluate the effect of the weight ratio between SDS and MWCNTs on the electromechanical properties of the film, direct tensile tests and optical strain measurement were conducted. It was found that the CNT film hardly affected the mechanical behavior of CNT/PET composite films, while the electrical behavior of the CNT film was strongly affected by the SDS concentration in the CNT film. The electrical resistance of CNT/PET films gradually increased with the strain applied to the PET substrate, even up to a large strain that ruptured the substrate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.213-213
• /
• 1999

현재 LCD용 기판재료는 ITO/glass를 전극으로 사용하고 있다. 그러나 유리기판은 무겁고 깨지기 쉽기 때문에 사용상 곤란한 점이 많다. 최근 flexible하고 가공성 및 생산성이 우수한 플라스틱한 ITO를 성막하여 EL용, Touch panel, plastic LCD용 사용하려는 시도로, roll-to-roll 연속 스퍼터링에 의한 ITO성막공정에 대한 연구가 최근 활발하게 이루어지고 있다. 폴리머는 유리에 비해 Tg 온도가 낮고, 기판으로부터의 수분 및 여러 종류의 가스방출이 심하기 때문에 유리와는 달리 ITO막의 제조에 있어 큰 차이점이 있다. 따라서, 폴리머에 반응성 스퍼터링을 하기 위해서는 표면처리가 중요한 변수가 되며, roll to roll sputter로 ITO 필름을 얻기 위해서는 폭과 길이 방향으로 균일한 막을 얻는 것이 중요하다. 두께 75$\mu\textrm{m}$, 폭 190mm, 길이 400m로 권취된 광학용 Polyethylene terephthalate(PET:Tg:8$0^{\circ}C$)위에 In-10%Sn의 합금타겟과 Unipolar pulsed DC power supply를 사용하여 반응성 마그네트론 스퍼터링 방법으로 0.2m/min의 속도로 연속 스퍼터링 하였다. PET를 Ar/O2 혼합가스로 플라즈마 전처리를 한 후, AFM, XPS를 이용하여 효과를 분석을 하였고, 성막전에 가스방출을 막기 위해 TiO를 코팅하였다. Pilot 연속 생산공정에서 재현성을 위해 PEM(Plasma Emission Monitor)의 optical emission spectroscopy를 이용, 금속과 산화물의 천이구역에서 sprtter된 I/Sn 이온과 산소 이온의 반응에 의한 최적의 플라즈마의 강도값을 입력하여 플라즈마의 radiation을 검출하고, 스퍼터링 공정중 실질적인 in-situ 정보로 이용하였다. PEM을 통하여 In/Sn의 플라즈마 강도변화를 조사하였다. 초기 In/Sn의 플라즈마 강도(intensity)는 강도를 100하여, 산소를 주입한 결과, plasma intensity가 35 줄어들었고, 이때 우수한 ITO 박막을 얻을 수 있었다. Pulsed DC power를 사용하여 아크 현상을 방지하였다. PET 상에 coating 된 ITO 박막의 표면저항과 광투과도는 4-point prove와 spectrophotometer를 이용하여 분석하였고, AES로 박막의 두께에 따른 성분비를 확인하였다. ITO 박막의 광투과도는 산소의 유량과 sputter 된 In/Sn ion의 plasma emission peak에 따라 72%-92%까지 변화하였으며, 저항은 37$\Omega$/$\square$ 이상을 나타내었다. 박막의 Sn/In atomic ratio는 0.12, O/In의 비율은 In2O3의 화학양론적 비율인 1.5보다 작은 1.3을 나타내었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.969-974
• /
• 2011

A carbon nanotube (CNT) is a cylindrical carbon nanostructure with good transport properties along the tube's axis. As an approach for realizing the practical use of CNTs, CNT networks are fabricated and their applications in many fields are investigated. To fabricate thin CNT-based films, several methods have been proposed and used. Among these methods, the spray coating method is a robust method for fabricating a large area. However, it is difficult to achieve uniformity in the CNT network. To solve this problem, it is necessary to understand the effect of the sprayprocess parameters on the deposition thickness distribution. In this study, a numerical model for predicting the deposition thickness distribution during the spray process was developed. The spatial deposition thickness distributions obtained according to various nozzle paths were analyzed using the developed numerical model.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.421-428
• /
• 2003

The kinetics of photoinitiated polymerization of reactive oligomer methacrylates and oligomer methacrylate/SBS blends have been studied to characterize the diffusion-controlled reaction using Fourier Transform Infrared Spectroscopy-Attenuated Total Reflectance (ATR-FTIR). The polymerization rates of reactive oligomer methacrylates and oligomer methacrylate/SBS blends were autocatalytic in nature at the initial stage and then a retardation of the reaction conversion occurred gradually as the polymer matrix became vitrified, and finally the reaction became diffusion controlled. Photopolymerization behavior of methacrylate/SBS blends was well predicted using the diffusion-controlled reaction model. N-Vinyl-2-pyrrolidinone (NVP) as a reactive solvent was used to incorporate SBS into methacrylate to form semi-IPN via photopolymerization. Due to the high reactivity of NVP, polymerization rate increased with the increase of NVP content. As the content of NVP-SBS in the blends increased up to 10 phr, the reaction conversion maintained almost constant. But above 20 phr of NVP-SBS in the blends, the reaction conversion gradually decreased since the increase of viscosity affected on the photopolymerization rate. The semi-IPN films of methacrylate/SBS blends were transparent at room temperature as well as at increased temperature and were able to be applied to surface coating.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.89-89
• /
• 2017

가속기 기술을 이용한 재료에의 표면처리기술은 일정에너지를 가지는 이온이 재료표면에 충돌함으로서, 스퍼터링, 이온주입, 미세구조 변화 등의 현상을 이용하여 재료표면의 특성을 변화시켜 기계적, 화학적, 광학적, 전기적 특성 등을 변화시키는 표면개질기술에 활용되어져 왔다. 이러한 이온빔 표면처리기술은 이온의 종류나 시편의 제한 없이 치밀한 원자혼합물을 형성하고, 계면형성이 없고, 또한 저온공정이 가능하므로, 정밀도가 요구되는 부품의 내마모성과 내부식성 등을 포함한 기본적인 표면특성 뿐만 아니라 전기전도도, 친소수특성, 내광성 등 표면에 관계된 특성을 개선시키는 역할을 하며, 이온빔 믹싱, 이온빔 스퍼터링, 이온빔 전처리 후 코팅 등의 복합공정을 통해 보다 개선된 표면특성을 가지는 박막제조공정에 적용될 수 있다. 본 발표에서는 지난 10년간 가속기기술을 응용한 이온빔 장치기술 개발현황을 발표하고, 이러한 장치를 활용하여 이온빔 표면처리기술 사례인 내광성/내스크래치성 향상 고분자, 정전기방지, 초친수 표면처리, 기체투과도제어, 자외선차단 필름, 고속에칭기술 등의 기술개발 현황을 발표하고자 한다. 한국원자력연구원 양성자가속기연구센터에서는 수백 keV급의 이온빔 표면처리 장치 이외에도 100MeV 선형 양성자가속기를 이용하여 2013년부터 다양한 분야의 양성자빔/이온빔 이용자들에게 이온빔 장치와 20MeV와 100MeV 이용시설에서 양성자빔/이온빔 서비스를 제공하고 있다. 2016년 기준 이용자수는 양성자가속기 392명, 이온빔장치 279명이며, 이용자 수행과제는 양성자가속기, 이온빔장치 각각 130여개 과제가 수행되었다. 이러한 이용자들의 빔이용연구를 통해 20여편의 논문투고, 10여편의 특허출원의 성과를 얻었으며, 나노분야, 생명공학분야 등의 다양한 분야에서의 빔이용기술을 통해 활발한 연구가 이루어질 것으로 예상된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.25-25
• /
• 2010

Cu(In, Ga)$Se_2$ (CIGS), $CuInS_2$ (CIS) 등의 Se, S계 화합물 박막 소재를 활용한 태양전지는 높은 광흡수 계수, 상대적으로 높은 효율, 화학적 안정성, 도시적인 미관 등으로 인하여 최근 부각되고 있다. 하지만 CIGS, CIS 등의 Se, S계 박막 소재는 상대적으로 매장량이 적은(희유 원소) In, Ga을 사용하고 있는 약점이 있으며 특히 In의 경우는 LCD Display에 사용되는 ITO 필름으로 인해 가격이 상승하고 있다. 따라서 결정질 실리콘 태양전지의 경험에서와 같이 생산량의 급증에서 기인하는 소재 부족 문제를 미연에 방지하고 안정적인 성장을 이루기 위해서는 희유 원소인 In과 Ga을 저가 범용원소로 대체 하는 기술을 추가적으로 개발해야 한다. $Cu_2ZnSnS_4$ (CZTS) 박막 태양전지는 Se, S계 태양전지에서 III 족 원소인 In, Ga을 II-IV 원소인 Zn와 Sn으로 대체하는 기술로 기존의 CIGS계 태양전지가 보유하고 있는 장점을 유지하면서 저가 태양전지를 구현할 수 있는 대체 물질로 최근 많은 관심을 받고 있다. CZTS 박막 태양전지 관련 세계 기술동향 조사에 따르면, 최근 2008년에 일본 Nagaoka 대학의 Katagiri 그룹에서 스퍼터를 이용하여 제조한 CZTS 박막 태양전지의 최고 효율이 6.77%가 됨을 보고하였고, 2010년 초에는 IBM에서 스핀코팅법을 이용하여 제조한 CZT(S, Se) 박막 태양전지의 효율을 9.66%까지 올릴 수 있음을 Advanced Materials에 보고하였다. 본 발표에서는 우선 CZTS 박막태양전지 제조 및 특성 분석 관련 개요 및 세계 기술 개발 동향 분석 결과를 설명할 것이다. 또한 본 실험실, 에너지 기술 연구원 및 KIST, 영남대 등 국내에서 진행되고 있는 CZTS 관련 기술 개발 현황에 대하여 설명할 것이다.