• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.80-84
• /
• 2000

To investigate the effect of packaging condition on functional MA films laminated (30CE, 50CE), corrugated paperboard box (control), 30LDPE, and 50LDPE pouches on the freshness extension of Fuji apples, the weight loss, firmness, total ascorbic acid, titratable acidity, soluble solids content and appearence were evaluated at 5$^{\circ}C$ after 75 days. Weight loss of 30CE and 50CE, and 30LD and 50LD was 0.4 to 0.5%, and 0.2%, but control was 2.7%. Firmness in film packages was higher than that of control, and CE packagings were higher than LD. Total ascorbic acid content of Fuji apple in control after 75 days was 2.12 mg%, that of control was decreased by 42%, those of LD packagings were 31% and 29%, and those of CE were 24% and 22%. Titratable acidity and soluble solids content in control changed more than that of MA film packagings. Overall appearence of 'Fuji' apples in CE packagings was better than that of control.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.233-239
• /
• 2013

A quartz crystal microbalance (QCM) system coated with poly (isobutylene), polystyrene, and poly (methyl methacrylate) has been prepared to measure the adsorption amounts of benzene, toluene, and p-xylene at very low pressures. The resonant frequency shift of the QCM system is proportional to the increase in pressure in all experiments. The Henry's constants for all adsorbates on the polymer films are obtained from experimental data and compared with the minimum adsorption potential energies between adsorbates and the polymer films. In general, there is an explicit correlation between adsorption amount and the minimum adsorption potential energy.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.373-378
• /
• 2013

The interfacial adhesion strength is very important in $SiO_x$ deposited PC film for the barrier enhanced polycarbonate (PC) flexible substrate. In this study, PC films were treated by undercoating, UV/$O_3$ and low temperature plasma and then the effect of physical and chemical surface modifications on the interfacial adhesion strength between PC film and $SiO_x$ barrier layer were studied. It was found that untreated PC film shows significantly low interfacial adhesion strength due to the smooth surface and low surface free energy of PC. Low temperature plasma treatments resulted in the increase of both surface roughness and surface free energy due to etching and the appearance of polar molecules on the PC surface. However, UV/$O_3$ treatment only shows the increase of surface free energy by developed polar molecules on the surface. These surface modifications caused the enhancement of surface interfacial strength between PC film and $SiO_x$ barrier. In the case of undercoating, it was found that the increase of surface interfacial strength was achieved by adhesion between various acrylic acid on acrylate coated surface and $SiO_x$ without increase of polar surface energy. In addition, the barrier property is also improved by organic-inorganic hybrid multilayer structure.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.81-91
• /
• 2003

본 연구에서는 복층으로 구성된 $WSio_2Al$ 금속절연체의 상세를 보여주고 있는데, 금속과 절연체의 합성물질은 태양 흡수율의 설계와 열적인 현상을 보여주기 위해 종종 사용된다. 금속의 접착기면 위에 얇은 복층 코팅으로 구성되는 디자인은 태양 스펙트럼의 파장권역에서 선택적 흡수를 위함이다. 본 연구는 태양 복사의 열성능 평가를 위해 금속과 절연체 필름의 방사율, 태양흡수율, 코팅순서, 미 반사층(AR)의 두께, 코팅 두께와 코팅 면수, 전체 코팅 두께 등에 대해 시뮬레이션 하였다. 그 결과 네 겹의 코팅설계에서 $Sio_2AR$ 75 nm 두께와 각각의 층에서 $0.5\sim0.7$의 가변 금속부분 구성이 가장 우수한 성능을 갖는 것으로 나타났다. 또한 시뮬레이션으로 금속과 절연체 합성물의 최적의 구성과 각각의 코팅 두께에 대한 예측이 가능했으며, 최대 태양흡수율은 0.94, 방사율은 0.115의 금속과 절연체의 합성물을 구성할 수 있었다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2017

To identify applicability for packaging material of polyvinyl alcohol (PVA)/boric acid (BA) coating solution with highly-enhanced water vapor and oxygen barrier properties, the PET/PVA-BA/OPP multi-layer films were prepared through comma coating and lamination process. The oxygen and water vapor permeabilities, and tensile strength of as-prepared multi-layer films were investigated before and after pressure cooker test (PCT). Although oxygen and water vapor permeabilites, and mechanical properties of PET/PVA-BA/OPP multi-layer films was decreased after PCT, their properties were highly enhanced as increase of BA contents in PVA matrix. This is strongly related with enhanced cross-linking density in PVA-BA layer. In storage test of seasoned-laver, the PET/PVA-BA/OPP multi-layer films were comparatively effective to suppress the increase in peroxide value originating from oxidation of seasoned-laver. Comparing the commercially available PP/Al-metallized PP for seasoned-laver packaging, however, PET/PVA-BA/OPP multi-layer films did not show any advantage in water activity. This is due to higher water vapor permeation properties of as-prepared multi-layer films. Therefore, further studies are required to enhance the water vapor permeation in PET/PVA-BA/OPP multi-layer films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.484-485
• /
• 2011

반사방지(Anti-Reflection, AR) 특성은 태양전지, LED, 광검출기 등의 광전소자와 디스플레이의 효율과 투과도를 향상시키기 위해 적용되고 있다. 또한 최근에 네비게이션, 스마트폰의 보급 증가로 인해 소형 디스플레이에 지문방지와 동시에 반사방지 기능을 갖는 필름이 사용되고 있다. 현재 적용되고 있는 반사방지 필름은 다층박막 코팅으로 형성된 필름[1]으로 생산단가와 박막의 내구성 및 신뢰성에 문제점을 가지고 있다. 이런 문제점을 해결하기 위해 나노구조로 제작 되는 반사방지 필름에 관한 연구가 활발히 진행되고 있다[2]. 나노구조로 형성된 반사방지 구조는 moth-eye 구조라고 하며, 기본 원리는 원뿔 형태를 형성된 나노 구조를 통해 공기와 나노구조 사이의 유효 굴절률을 서서히 변화시켜 반사를 줄이는 것이다. 그러므로 moth-eye 나노구조는 파장 이하의 pitch와 파장 크기의 높이를 갖도록 구조가 제작되어야 한다[3]. Photo-lithography[4], e-beam lithography[5], interference lithography[6], dip-pen nanolithography[7], hybrid nano-patterning lithography[8] 등 여러 가지 방법으로 나노 구조를 제작하고 있으나, 네비게이션이나 스마트폰 등에 적용될 수 있는 대면적으로 제작하기 위해서는 roll-to-roll printing과 같은 대면적 공정을 이용하여 제작하는 것이 필요하다. 본 논문에서는 원통형 알루미늄 rod에 양극산화를 통해 다공성 AAO(anode aluminium oxide) template를 제작하고, roll-to-roll printing 기술을 사용하여 moth-eye 나노구조를 갖는 반사방지 필름을 제작하는 것에 대해 기술하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.296-304
• /
• 2014

For this research, prepared polyurethane dispersion of hard segment type and polyethylene emulsion wax. Use these resin, this article has been analyzed about mechanical properties variation by increasing amount of polyethylene emulsion wax on Lam skin leather and dried film. According to measure data for solvent resistance, PUD had good property. As known in the results, increase of polyethylene wax constant did not influence to big variation of hybrid resin properties. As test of tensile strength, PUD had good tensile characteristic($1.235kg_f/mm^2$) and PUD-EW4 had lowest tensile characteristic($1.022kg_f/mm^2$). As same as tensile characteristic, abrasion test determined PUD(52.225 mg.loss) had highest properties. In elongation case, PUD showed 698 % modulus which was best properties in this experiment.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.53-58
• /
• 2012

In order to improve the surface hardness of transparent plastic films, an organic-inorganic hybrid coating solution was sunthesized by the sol-gel method. Coating solutions that were prepared colloidal silica (CS), poly methyl methacrylate (PMMA), vinyltrimethoxysilane (VTMS), and [3-(methacryloyloxy)]propyltrimethoxy silane (MAPTMS) was varied with synthesizing parameters such as kinds of organic silane and weight ratio of CS to PMMA. Such coating solution was bar coated on the PET film, cured, and investigated on the chemical and physical properties of coating film. The organic-inorganic hybrid coating solutions have better properties at the pencil hardness and adhesion of coating film than those of an organic material such as PMMA.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.97-103
• /
• 2023

Barrier films for transparent packaging materials with excellent moisture barrier properties are prepared, utilizing a nanoclay dispersion coating layer formed after a pretreatment process of plasma activation surface treatment process under vacuum at room temperature. Attention is paid on optimizing the coupling additive through the appropriate crosslinking process and optimal dispersion process of the coating process to enhance adhesion. Analysis of the functional coating thin film shows that the water vapor transmission rate is less than 10 g/m²/24 hrs (ASTM F-1249) and the oxygen transmission rate is less than 30 cc/m²/24 hrs (ASTM D3985). It is shown that water barrier properties of coating thin film prepared in this study are greater than conventional untreated films by 10 times or more. The thickness of the transparent gas barrier film is within 0.1 mm, and the transparent gas barrier complex is implemented in two layers. In the study of PET thin film interface characteristics, FT-IR experimental analysis shows the reaction activity was optimized at RDS 1.125 %.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.2
• /
• pp.260-267
• /
• 2015

We investigated the applicability of polyethylene glycol (PEG) as a plasticizer in enteric-coated soft capsules based on determination of quality characteristics according to molecular weight and concentration of enteric-coating PEG solution. There was no difference according to molecular weight of PEG, whereas a low PEG concentration in the enteric-coating solution was associated with higher whiteness index and slower disintegration time in pH 6.8 media. Brittleness was observed in the coating film at seam areas in 5% PEG enteric-coating solution after 2 weeks of storage at room temperature. The enteric-coating properties of PEG were compared with those of acetylated monoglyceride (AMG) and triacetin, which are enteric-coating plasticizers. Enteric-coated soft capsule containing PEG as a plasticizer showed a lower whiteness index and faster dissolution profile than AMG and triacetin. Moreover, enteric-coated soft capsule containing AMG and triacetin as plasticizers showed coating film brittleness at seam areas after 2 months of accelerated storage [$40^{\circ}C$, relative humidity (RH) 75%] but no difference at room temperature storage ($25^{\circ}C$, RH 60%). The present study suggests that concentration of PEG is important to determine enteric-coating quality, regardless of the molecular weight of PEG. In conclusion, PEG has potential as a plasticizer due to its transparency and storage stability in enteric-coated soft capsules.