• Resources Recycling
• /
• v.32 no.1
• /
• pp.13-20
• /
• 2023

The objective of this article is to summarize the commercial lithium ion battery (LIB) recycling processes in Korea and to suggest new direction for LIB recycling. A representative LIB recycler, SungEel Hitech Co. has successfully operated the LIB recycling process for over 10 years, and new recycling processes were recently proposed or developed by many recycling companies and battery manufacturers. In the new recycling processes, lithium is recovered before nickel and cobalt due to the rapid rise in lithium prices, and metal sulfate solution as final product of recycling process can be supplied to manufacturers. The main problem that the new recycling process will face is impurities, which will mainly come from end-of-life electric vehicles or new additives in LIB, although the conventional processes must be improved for mass processing.

• New & Renewable Energy
• /
• v.4 no.1
• /
• pp.11-18
• /
• 2008

In-situ lithiated NiO has been manufactured as a conventional cathode material of molten carbonate fuel cell (MCFC), however this material has a weakness for commercialization of MCFC because NiO is spontaneously dissolved into the electrolyte under MCFC operating conditions, resulting in short circuit between cathode and anode. In this research, therefore, $Co(OH)_2$-coated Ni powder was prepared by precipitation method with controlling pH at low temperature and atmospheric pressure. Modified cathode was fabricated by a conventional tape casting method and sintered at 700$^{\circ}C$ in a $H_2/N_2$ atmosphere, Based on characterization result, Pore size distribution and porosity was suitable for the cathode of MCFC. According to the result of dissolution, Ni solubility of modified cathode was 33% lower than that of conventional cathode. In addition, modified electrode showed a good performance from the single cell operation.

• Journal of the Korean institute of surface engineering
• /
• v.22 no.3
• /
• pp.128-134
• /
• 1989

Mechanism of cobalt deposition was investigated using the potentiodynamic potentiostatic methods in solution of pH 4 and pH6.4 In all experimental conditions, polarization curves showed two regions with different Tafel slopes and the reaction order of cobalt ion was varied with the pH. It is belived that the deposition mechanism depends not only on the portential but also on the ph.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.223-228
• /
• 1998

Glass films of $SiO_2-TiO_2-M_xO_y$ (M = Co, Cr or Cu) have been prepared on soda-lime-silica slide glasses by the chemical solution method using a spin-coating technique. Commercially available tetraethyl orthosilicate, titanium trichloride, and cobalt-, chromium- and copper-nitrates were used as starting materials. No crystalline segregations of $Co_3O_4$, $Cr_2O_3$ and CuO were observed by X-ray diffraction ${\theta}-2{\theta}$ scans. From the optical transmission analysis, cobalt existed as $ Co^{2+}$ in tetrahedral coordination, chromium as $Cr^{6+}$ in tetrahedral symmetry and copper as $Cu^{2+}$ in octahedral coordination. Films with a crack-free and no texture exhibited homogeneous interfaces between the films and the substrates along the cross-section.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.490-494
• /
• 2016

This paper describes the very efficient and highly enantioselective ring opening of terminal epoxides with alkyl and arene sulfonic acid. The dinuclear chiral (salen) Co complexes bearing Lewis acids of Al, Ga and In catalyze the reaction enantioselectively in the presence of tetrabutylammonium chloride using tert-butyl methyl ether as a solvent. The variation of the anion of the tetra butyl ammonium salt has significant impact on the reactivity and selectivity of the asymmetric ring opening of phenyl glycidyl ether with p-toluenesulfonic acid. The order of reactivity and selectivity was found to be $Cl^-$ > $l^-$ > $Br^-$ > $OH^-$. Strong synergistic effects of the different Lewis acid centers of Co-Al, Co-Ga and Co-In complexes were observed in the catalytic process. The dinuclear chiral salen catalyst containing $AlCl_3$ was found to be most active and highly enantioselective (91% ee).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.15-30
• /
• 2002

최근 화장품 사용인구의 증가와 안전성에 대한 관심 증대에 따라 화장품 중 유해성분 함유에 대한 논란이 종종 있어왔다. 화장품에 대한 전문적 지식이 없는 사람들에 의하여 진행된 잘못된 정보로 인하여 화장품 중에 포함된 모든 중금속이 인체에 심각한 영향을 초래한다는 등의 오해를 불러와 관련 업계에 적지 않은 피해를 주기도 하였다. 이에 본 자료에서는 구체적 근거자료와 연구 논문들을 기반으로 유해한 중금속, 안전하여 사용이 공인된 중금속 등을 조사하여 화장품에서의 중금속의 개념을 정립하고자 하였다. 국내에서는 식품의약품안전청 고시 제2000-27호에 화장품에 포함되었을 때 유해한 중금속으로 납, 비소 및 수은을 명시하고 그 규제농도를 규정하고 있다. 규제 중금속은 아니지만 피부에 알러지를 일으키는 중금속으로는 니켈이 있는데 화장품 중 몇몇 제품군에서 소량(수∼수십ppm) 이 검출되기도 한다. 그러나 이는 일상으로 사용하는 각종 귀금속, 시계, 안경테, 클립, 지퍼 등의 금속 용품에 포함된 니켈의 양(수∼수십%)에 비하여 매우 적은 양이며 정상적인 사람에게는 무해하다. 실제 대다수의 니켈 알러지는 화장품이 아닌 귀금속이나 시계 등의 금속류 제품 등에 의하여 유발된다. 또한 많은 종류의 중금속 화합물이 화장품 원료로 사용되고 있다. 전세계적으로 널리 사용되는 것으로 크롬, 망간, 비스머스, 구리, 철, 코발트, 티타늄, 아연 등의 화합물이 있으며 이들은 각종 화장품 공정서 및 원료집 등에 수재되어 사용되고 있다. 이들 중 코발트와 크롬이 피부에 유해하다는 몇몇 보고가 있지만, 이는 이들 원소의 수용성염형태의 특정 화합물인 cobalt chloride와 chromate 및 dichromate의 염에 관한 것으로 화장품에서 사용되는 불용성 산화물인 cobalt aluminum oxide, cobalt titanium oxide, cobalt blue, chromium oxde greens 및 chromium hydroide green 등, 국제적으로 널리 사용되는 안전한 중금속 화합물과는 그 특성 및 독성이 판이하게 다르다. 따라서 화장품에서는 매우 안전한 중금속 화합물만이 사용된다. 업계는 유해 중금속에 관해서는 규제에 입각한 엄격한 품질관리에 힘쓰고 중금속의 화학적 분자구조(수용성염 vs 불용성산화물)를 구별할 수 있는 분석방법 개발에 주력하여야 한다. 그리고 안전한 화장품을 사용하고자 하는 소비자의 욕구를 충족시키고 잘못된 인식과 보도로 인하여 안전한 화장품이 유해한 것으로 오도되는 것을 막아야 할 것이다.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.1
• /
• pp.52-58
• /
• 2013

In order to overcome the cost issue for commercialization of polymer electrolyte membrane fuel cell (PEMFC), this research was conducted for replacing platinum cathode catalyst with non-precious metal catalyst. The non-precious metal catalyst (Co-PANI-C) was synthesized by the simple reduction method with polyaniline (PANI), carbon black, and cobalt precursor without any heat treatment. Characterization of new Co-PANI-C composite catalysts was done by the measurement of X-ray diffraction (XRD) and thermogravimetric analysis (TGA) for structure analysis and performed by rotating disk electrode (RDE) and rotating ring disk electrode (RRDE) for electrochemical analysis. As a result, Co-PANI-C catalyst showed 60 mV lower on-set potential for oxygen reduction reaction (ORR) than Pt/C catalyst, but the overall reduction current of Co-PANI-C catalysts by ORR was still smaller than that of Pt/C. In addition, the ORR behavior of Co-PANI-C catalysts depending on the rotation speed of electrode and the stability of Co-PANI-C catalyst under potential cycling and the performance of fuel cell conditions are also discussed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.1-9
• /
• 2008

This study examined the effect of an electrokinetic-flushing remediation for a soil of a high permeability. The soil was sampled from the site around a research atomic reactor which had high hydro-conductivities due to a high content of sand in the soil. The flow rate of the washing reagent was fast at the beginning but it was reduced as time lapsed. In the case of using citric acid as a washing reagent, the flow rate was fastest, 78.7 ml/day. The removal efficiencies of $Co^{2+}$ and $Cs^+$ from a soil cell with acetic acid were the highest, which were 95.2% and 84.2% respectively. The soil waste-solution volume generated from the electrokinetic remediation was reduced to about 1/20 of that from the soil washing remediation. Meanwhile, the electrokinetic-flushing method enhanced the removal efficiencies of $Co^{2+}$ and $Cs^+$ from the soil by about 6% and 2% respectively, compared to those by the electrokinetic method. Consequently, it was found that the electrokinetic-flushing method was more effective for the remediation of a soil with a high permeability.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.173-176
• /
• 1999

The production of fine metal oxide particles in supercritical water has been studied. Cobalt nitrate solution and manganese nitrate solution have been selected as model solutions for metal salt aqueous solution and the particles of cobalt oxide and manganese oxide have been produced. It was observed that the production of fine metal oxide particles in supercritical water was feasible and the dehydration rate was remarkably high in supercritical water. In spite of a short residence time (3~100 seconds), fine particles ($0.5{\sim}2{\mu}m$) have been produced. In the supercritical water process, the temperature of mixer had a significant effect on particle size and size distribution. It was observed that a change in reaction temperature resulted in the control of particle size.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.743-745
• /
• 2015

Amorphous cobalt phosphates were synthesized with their distinct morphology by controlling the amount of base in the synthetic condition. The crystallinity and morphology of cobalt phosphates were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The prepared cobalt phosphates were applied as a heterogeneous catalyst for generating hydrogen gas from the hydrolysis reaction of sodium borohydride. We found that the catalyst prepared using the least amount of base condition at room temperature showed a plate shape with less than 10 nm thickness, which resulted in the best catalytic activity among all catalysts due to the large surface area.