• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.377-383
• /
• 2017

In this thesis, Improvisation of Jazz Vocal that can be characterized as Jazz music, namely practice of Scat suggest that way of applied approach that root position of chord and chord tones. Scat plays a solo using reproduced tunes of meaningless scat syllable that is not use the lyrics and melodies, which are written in a score. For this, Using the root position of chord is a reference point that Jazz vocal constructs a musical melody. Singing person can develop that reference point from simple scat to develop increasingly complex scat and can express that musical expression and communion. It analyzed the music functionally with a standard Jazz music 'All of me' as the center from composition of chord tone that improvise song to bass line, bass scat, analysis of chord tones arpeggio and expression. In this thesis, the improvisation of a Jazz vocal that may seem somewhat abstruse and complex could be relatively easy to construct through a gradual approach.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.285-288
• /
• 2012

많은 해 동안 기타를 배우는 학생들은 거의 한 가지 방식으로 기타 지판을 습득해왔다. 바로 '근음기준 코드 톤 방식'이 그것인데 기타 상에서의 코드 톤 모양을 이해하는 데는 매우 유용한 방식이기도 하다. 그러나 오랜 음악 교육 경험에서 가이드 톤 기준 방식과 비교해 볼 때 근음기준 연습 방식에서 문제점이 발견되었다. 따라서 어떤 방식이 학생들이 멜로디적인 즉흥연주를 할 때 더 효과적인지 증명하기 위한 실험이 이루어졌다. 이 연구에서는 기타교육에 대한 해답을 얻고자 함이 아니라 초기 연습이 어떻게 멜로디적인 연주와 음악적인 연주에 영향을 주는지에 그 초점이 있다 하겠다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.2
• /
• pp.77-86
• /
• 2007

우주발사체 추적용 지상국비행종단지령장비는 위성발사체 발사 후 비행 중 일어날 수 있는 비상사태(비행안전영역을 벗어나거나 지상에서 더 이상 추적이 불가능할 경우)에 대하여 지상통제장치에서 비행종단을 명령하여 비행을 강제로 종단시키는 역할을 한다. 일반적으로 발사체에 비행종단을 명령하는 방식은 발사체의 종류 및 운용개념에 따라 다르게 적용되며, 가청주파수 대역의 톤 신호를 조합하는 IRIG 표준 톤 방식과 Secure 방식, 또한 잡음 및 보안특성에 강한 암호화 코드화 방식이 사용되고 있다. 본 글에서는 비행종단명령에 사용되는 다양한 전송방식 및 적용 사례를 살펴보고 세계 각국 및 국내 나로우주센터(고흥)에서 설치 운용 중인 지상국비행종단지령장비에 대한 운용개념 및 주요특성을 살펴보도록 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1588-1596
• /
• 1999

This paper describes a signaling processor IC for land mobile radio systems. This IC generates CTSS tone or DCS code signals for signaling between the land mobile radio systems and decodes them to open the audio path. The CTSS tone or DCS code signals occupy the subaudio band and are transmitted with voice signal. The audio and subaudio paths consist of switched capacitor filters. The IC has been implemented in 0.6-$\mu\textrm{m}$ 2-poly 3-metal CMOS process. The chip size is 3 mm$\times$4.3 mm and total current is about 3.4 ㎃ at 3.3 V.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.3
• /
• pp.31-39
• /
• 2016

As the computer technology is developed, score-writers that can edit music have more improved functions. A user not only can insert notes, chords, and musical symbols conveniently, but also can listen to music displayed in the score. Existing commercial score-writers make scores look good and play notes through VSTi(Virtual Studio Technology instrument). However chord accompaniment function is so vulnerable that it is hard to know whether or not displayed chords are suitable for music. If a score-writer has a proper function that plays chord sound good to hear, it will be a good reference to band music sheet writers. In this paper, to improve chord playback function in existing score-writers, we propose an algorithm that selects suitable chord tones for chord playback and implemented a program. If we apply this algorithm, the chord play function of a score-writer will be strengthened and resultantly a music sheet writer who makes a band music can make scores more conveniently.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.418-429
• /
• 1996

The number of bits per message and the number of tones in the frequency-hopping sequence are determined by the available bandwidth and the data rate of each user. These parameters in turn determine the tone duration which strongly influences the vulnerability of the system to transmission distortions. In this paper, an address code which is assigned to each individual user was employed in order to reduce the collisions or hit. Also the frequency band is divided into several subbands and each user transmits multitone frequency per subband per chip. And the new system which is to increase the duration of each tone by increasing the total number of system frequencies that has been proposed. It is found that an optimum value bit, tone, number of frequencies per chirp can improve the err performance. This flexibility slightly increases maximum efficiecy and makes the the system less vulnerable to multipath delay. So, It is found that as the nuber of user increased 50%, the efficiency as a tuncion of the bandwidth to user'rate ratio improve 20%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.664-665
• /
• 2016

This paper proposes an identification system based on QR (Quick Response) code for production and disposal information of Internet of Things (IoT) devices. Three thousands and five hundreds of electronic devices have replaced and discarded in South Korea in a year, and twenty millions to fifty millions tons of e-wastes have happened throughout the world every year. According to Gartner, market research institution, the number of IoT devices will increase from 2.3 billions in 2013 to 30 billions in 2020, however, the regulations and systems which take into account environment were not prepared. The identification systems for reflecting information of devices, which are produced or discarded, are required to resolve the problem. The proposed identification system based on QR code can store much more massive data such as the producer, product's model, serial number, recycling rate, recovering rate, recyclability rate, recoverability rate than RFID (Radio-Frequency Identification). Also, users can immediately recognize production and disposal information by a QR code application in a smartphone.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.94-98
• /
• 2013

A report of security problems and simultaneous operation limits of Standard tone currently used for FTS introduces the development of a next generation FTS. In this paper, BER performance by modulations and channel coding methods for EFTS are compared. Simulation results show that coherent modulations have better BER performance than noncoherent modulations. However the environments of a lunching vehicle may cause serious problems in achieving and maintaining synchronization and the increasing complexity of coherent systems also increases reliability problems. Therefore noncoherent systems are suitable for FTS even though BER performace of noncoherent systems is lower than coherent systems. Noncoherent DPSK has better BER performance than noncoherent CPFSK. However the PEP of noncoherent DPSK is 0.8dB higher than noncoherent CPFSK. Therefore a transmitter of noncoherent DPSK has more output power than noncoherent CPFSK. Convoltional code has better BER performance than RS code. However RS code has a tendency of steeply decreasing BER near the wanted $E_b/N_0$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.441-447
• /
• 2020

In a situation in which around 50 million metric tons of electrical and electronic products is generated globally per year, the total installed base of Internet of Things (IoT) devices is projected to amount to around 75 billion worldwide by 2025. However, there is very little research on identification schemes for end-of-life treatment (EoLT) of IoT devices. To address this issue, this paper proposes new identifiers including EoLT information such as recyclability rate (Rcyc) and recoverability rate (Rcov) of an IoT device, recycling rate (RCR) and recovery rate (RVR) of each part in the IoT device, etc. and implements them by using object identifier (OID), mobile radio frequency identification (RFID) and quick response (QR) code. The implemented OID and mobile RFID can be used with cooperation of a remote server via communication networks and the implemented QR code can be used simply with a smartphone app.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.1
• /
• pp.16-24
• /
• 2012

In this study, two-stage hypersonic scramjet vehicle was designed for the flight condition of Mach number 6. In order to launch at sea level, two stage concept was applied. The first stage of the vehicle is solid rocket-powered and is mounted under the second stage. The second stage is powered by scramjet propulsion system and gas wings. The suggested mission scenario is to deliver 0.2 ton payload to the range of 2,000 km. For the first step of conceptual design, trajectory of air vehicle was calculated by 3-DOF trajectory code. Based on the result of trajectory code, scramjet engine design and mass estimation were performed by non-equilibrium nozzle flow code and NASA's HASA model, respectively. In order to find best solution, all steps of designing process was iterated until they was reached.