• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.4
• /
• pp.22-32
• /
• 2001

In this paper, we propose an average acquisition time and hardware design of high speed PN code synchronous acquisition system using DMF(Digital Matched Filter) with new switching method in DS-SS/CDMA(Direct Sequence Spread Spectrum Code Division Multiple Access). In reality, the PN code synchronous acquisition system using DMF has very complicated hardware, high cost and high power consumption. The PN code synchronous acquisition system using proposed switching method DMF can overcome those disadvantages. Therefore, we can make hardware simple and obtain low power and high density by reducing the area by 1/5 against the conventional approaches of using either the matched filters or the serial correlators. The proposed system architecture is also simple and easily controllable since there is no square-term circuit after execution of digital filtering.

• Journal of Korea Multimedia Society
• /
• v.16 no.7
• /
• pp.802-809
• /
• 2013

In this paper, we propose the similarity measurement method between two program codes by counting the frequency and length of continuous patterns of specifiers and keywords, which exist in two program codes. In addition, we propose the visualization method of this analysis result by formal concept analysis. Proposed method considers adjacencies of specifiers or keywords, which have not been considered in the previous similarity measurements. Proposed method can detect the plagiarism by analyzing the pattern in each function regardless of the order of function call and execution. In addition, the result of the similarity measurement is visualized by the lattice of formal concept analysis to increase the user understanding about the relations between program codes. Experimental results showed that proposed method succeeded in 96% plagiarism detections. Our method could be applied into the analysis of general documents.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.914-925
• /
• 1998

This paper considers the evaluation of the hybrid acquistion perdformance for the pilot signal in the direct sequence code division multiple access(DS/CDMA) forward link. the hybrid acquisition is introduced by the combination of two schemes, the parallel and serial acquisions. The mean acquisition time of the proposed scheme is derived to consider both the best case(the correct code-phase offsets are included i one subset) and the worst case(the correct code-phase offsets exist at the boundary of two subsets), which are cause by the distribution of the correct code-phase offsets in the subset. Expressions for the detection, false alarm, and miss probabilities are derived for the case of multiple correct code-phase offsets and multipath Rayleigh fading channel. Numerical results present the hybrid acquistion performance with repect to design parameters such as postdetectio integration length in the search and verification modes, subset size, and number of I/Q noncoherent correlators, and compare the hybrid acquistion with the parallel acquistion in terms of the minimum acquistion time under the same hardware complexity.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.23-30
• /
• 2021

An Automated Industry and Occupation Coding System assigns statistical classification code to the enormous amount of natural language data collected from people who write about their industry and occupation. Unlike previous studies that applied information retrieval, we propose a system that does not need an index database and gives proper code regardless of the level of classification. Also, we show our model, which utilized KoBERT that achieves high performance in natural language downstream tasks with deep learning, outperforms baseline. Our method achieves 95.65%, 91.51%, and 97.66% in Occupation/Industry Code Classification of Population and Housing Census, and Industry Code Classification of Census on Basic Characteristics of Establishments. Moreover, we also demonstrate future improvements through error analysis in the respect of data and modeling.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 1994

The flame speed correlation considering thermal-hydraulic phenomena under severe accidents is proposed and correction coefficients are defined. This correlation modifies the pressure dependency in Iijima-Takeno correlation and adds the steam suppression effects to it in the anticipated hydrogen and steam concentration ranges under severe accidents. The existing models of flame speed due to hydrogen combustion under severe accidents are based on the experiments which were performed merely at room temperature and atmospheric pressure. They have difficulty in predicting a accurate flame speed in a case of high temperature and pressure during severe accidents. Thus the flame structure is assumed as a prerequisite to the reliable determination of flame speed and theoretical model is developed. To examine the validity, flame speeds in various conditions calculated by this model are compared with those obtained by the calculation of the existing correlations of the codes such as improved HECTR and MAAP. Also the steam suppression ratio is quantified and the steam suppression coefficient is defined as a composition of mixture. Initial temperature and pressure dependencies are investigated and correction coefficents are determined. More experimental studies can be recommended to improve this correlation to its further works.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.151-153
• /
• 2005

체크섬은 에러검출의 우수성 때문에 TCP등에서 널리 사용하고 있다. 이 체크섬 방식은 연산이 간단하고 빠르나, 미검출 에러가 생기는 경우가 있기 때문에 여러 다른 형태의 체크섬 방식등이 연구가 진행되고 있고 각 방식에 성능과 효율면에서 상관관계가 있어 어플리케이션에따라 선택에 어려움이 있는 경우가 있다. 이에 저자는 새로운 개념인 이차원 체크섬이라는 방식을 제안하고자 한다. 알고리즘이 단순하면서도 기존의 체크섬의 미검출 에러의 문제를 현저하게 줄일 수 있고 비용-이득 스펙트럼상에서 매우 효과적이고 효율적이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.27-27
• /
• 2002

본 연구에서는 상용코드 FLUENT를 통한 수치모사 결과를 바탕으로 개발한 이중 원호익형의 성능상관식을 축류펌프의 설계에 적용하여 보았다. 일반적으로 익형의 설계는 크게 두 단계를 거치게 된다. 먼저 반경방향의 평형과 설계조건을 만족하는 임펠러와 디퓨저의 입구와 출구의 속도 삼각형을 얻고, 다음으로 적당한 익형을 선택하여 기하학적 형상을 결정하는 과정으로 이루어져 있다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.04a
• /
• pp.95-99
• /
• 1998

본 논문에서는 웨이브렛 변환을 이용한 영상 부호화에서 입력 영상의 통계적 성질에 관계없이 부호화 결과에 범용성을 갖는 새로운 벡터 양자화기 설계법을 제안한다. 제안하는 벡터 양자화기에서는 대표벡터를 생성하기 위한 학습계열로 난수에 영상의 상관과 에지성분을 첨가한 모사 영상을 사용한다. 제안한 방식에 의해 설계된 벡터양자화기와 코드북 생성에 이용하는 학습계열에 부호화 대상이 되는 영상과 같은 실제의 영상을 사용한 종래방식으로 설계된 벡터양자화기와 부호화 성능을 비교하여 종래방식의 문제점을 명확하게 밝힌다.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.67.2-67.2
• /
• 2010

구형 분자운에서의 복사전달문제를 탈출확률방법에 기초하여 non-local method로 풀었다. 매질을 여러 개의 구간으로 나누고 각 구간에서 물리량이 일정하다고 가정하여 복사전달식을 전개하였고 뉴턴방법을 채택하여 수렴속도를 빠르게 하였다. 이번 연구에서는 분자운 내부의 속도구배가 작든 크든 상관없이 복사전달식을 풀 수 있도록 수치코드를 개발하였다. 우리의 계산 결과는 속도구배가 큰 경우에는 LVG방법을 사용한 결과와 일치하고, 분자운이 정적인 경우에도 이전 연구의 결과와 일치한다. 앞으로 이 방법에 line-overlap과 saturation효과를 추가하여 만기형 별에서의 SiO메이저 연구에 활용할 계획이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.652-654
• /
• 2002

본 연구에서는 물체의 길이론 측정하기 위한 영상 처리 방법으로 하나의 이미지 프레임으로는 처리하기 힘든 큰 물체를 두 개의 프레임으로 분할하여 처리함으로써 정밀한 측정을 할 수 있는 길이 측정 기법을 제안한다. 본 연구에서 제안한 분할 측정 방식은 이진수로 인코딩되어 있는 눈금 코드 블록을 이용하여 그 차이를 계산하여 상대적으로 측정되어 물체의 크기에 상관없이 정확한 측정이 가능한 방식으로, 공장자동화 시스템의 제품 검사 공정에 효과적으로 사용됨을 보인다.