• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.606-609
• /
• 2011

본 연구에서는 실제 케이슨 방파제 구조물의 진동기반 안정성 평가를 위한 기초연구로서, 현장실험을 통해 케이슨 방파제 구조물의 진동응답을 분석하였다. 이를 위해 첫째, 대상구조물로서 부산항 오륙도 케이슨 방파제를 선정하였다. 둘째, 파랑에 의한 상시진동 가속도응답을 계측하였다. 마지막으로, 계측된 가속도신호로부터 파워스펙트럼밀도함수, 고유진동수 및 모드강성도 분석을 통해 케이슨 방파제의 진동특성을 분석하였다.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.79.1-79.1
• /
• 2010

본 연구에서는 케이슨식 방파제 구조물에 대하여 기초마운드의 잠재적인 손상 모니터링에 관한 연구를 수행하였다. 이를 위해 첫째, 케이슨식 방파제 기초마운드의 이상 상태 여부를 판단하기 위하여 진동응답 분석기법을 선정하였다. 둘째, 선정된 기법에 의한 손상 예측 가능성의 검증을 위하여 케이슨식 방파제의 구조모형을 제작하였다. 셋째, 모형케이슨에 대한 유한요소 모델 생생하여 기초마운드의 손상에 따른 진동응답을 분석하였다. 마지막으로, 모형케이슨에 대한 진동실험을 통하여 기초마운드의 손상 예측을 수행하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.3
• /
• pp.209-215
• /
• 2009

A new load surface method for reliability of caisson type breakwater was proposed. Linear functions for horizontal wave force and uplift force were estimated by using water level and wave height then they were applied to the reliability analysis of breakwater using first order reliability method(FORM). In the numerical example, sliding and overturning failure probability of caisson type breakwater were analyzed by using load surface and they were compared with those by Monte Carlo simulation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.206-208
• /
• 2018

울산신항의 활발한 개발로 인하여 기존에 설치되어 있던 온산항북방파제는 원래의 목적인 방파제로서의 기능은 사라지고, 울산항 3항로에 간섭된 지장물이 됨에 따라, 기존방파제의 철거를 수행하였으며 철거순서는 상치 콘크리트 깨기, 속채움 제거, 케이슨 절단 및 천공, 인양 및 제거, 케이슨 파쇄의 순서로 진행되었다. 특히, 파쇄한 콘크리트는 크라싱 작업을 통해 재생골재로 생산하였으며, 향후 신설케이슨의 속채움 재료로 재활용하는 것으로 하여 경제적 자원재활용에도 기여하고 있다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.213-220
• /
• 2005

An approach to calculate expected sliding distance of wave dissipating caisson breakwater is proposed. Time history of dynamic wave pressure for the calculation of sliding distance is made by extending conventional static wave pressure developed for the wave dissipating caisson breakwater. Construction of impact wave and standing wave was done by using duration time and maximum wave pressures of themselves. In the numerical analysis, the sliding distance for an attack of single wave and expected sliding distance for 50 years of wave dissipating breakwater by proposed method were compared with those by conventional method for uplift caisson breakwater. It was found that the sliding distance of wave dissipating breakwater by the proposed method is smaller than by conventional method.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.66.2-66.2
• /
• 2010

장대 케이슨 방파제에 작용하는 다방향 불규칙파랑의 파력 평활화 계수를 계산하였다. 다방향 불규칙파랑의 주파수 스펙트럼으로는 Bretschneider-Mitsuyasu 스펙트럼을 사용하였고, 방향 스펙트럼은 Mitsuyasyu 타입의 스펙트럼을 적용하였다. 계산 결과 단일 케이슨의 길이가 길수록, 주파향의 입사각이 클수록 평활화 계수는 감소하였다. 다양한 에 대해서도 계산하였으며, 가 클수록 평활화계수는 규칙파와 비슷한 경향을 보였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.396-410
• /
• 2020

The design and the construction are carried out by installation of new caissons on the back or the front of existing caissons to increase the stability of existing caisson breakwater. In this study, we use the eigenfunction expansion method to analyze the effects of wave structure interaction when new porous dual circular caissons are installed on the back or the front of existing breakwater. The porous dual circular caisson which consisting of a porous outer cylinder circumscribing an impermeable inner cylinder is one type of seawater exchanging breakwater. The comparison of numerical results between present method and Sankarbabu et al. is made, and the wave force and the wave run-up acting on each porous dual circular caisson are calculated for various parameters by considering the wave structure interaction.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.315-323
• /
• 2015

Damage level of coastal structures has been scaled up according to increase of wave height and duration of the storm due to the abnormal global climate change. So, the design criteria for new breakwaters is being intensified and structural strengthening is also conducted for the existing breakwaters. Recently, interlocking concept has been much attention to enhance the structural stability of the conventional caisson structure designed individually to resist waves. The interlocking caisson breakwater may be survival even if unusual high wave occurs because the maximum wave force may be reduced by phase lags among the wave forces acting on each caisson. In this study, the dispersion characteristics of wave forces using interlocking system that connect the upper part of caisson with cable in the normal direction of breakwater was investigated. A simplified linear model was developed for computational efficiency, in which the foundation and connection cables were modelled as linear springs, and caisson structures were assumed to be rigid. From numerical experiments, it can be found that the higher wave forces are transmitted through the cable as the angle of incident wave is larger, and the larger the stiffness of the interlocking cable makes larger wave dispersion effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.5
• /
• pp.156-168
• /
• 2022

The design and construction are carried out to improve the structural stability of caisson breakwaters by installing new caissons on the front or rear of old caissons. The wave forces acting on caisson are excessively calculated by the resonance of fluid existing between the old caisson and the new caisson in the numerical analysis using potential flow. In this study, we used the damping zone option in ANSYS AQWA program to analyze the wave forces acting on individual caissons according to the interaction effects between the incident wave and the caisson. By applying the damping zone option to the fluid in which resonance occurs, the wave forces acting on individual caissons were calculated by the change of damping factor. In addition, the wave force characteristics acting on individual caissons were analyzed for the different distances between caissons in the frequency domain analysis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.458-464
• /
• 2020

Calibration of load-resistance factors for the limit state design of perforated caisson breakwaters are presented. Reliability analysis of 12 breakwaters in nationwide ports was conducted. Then, partial safety factors and load-resistance factors were sequentially calculated according to target reliability index. Load resistance factors were optimized to give one set of factor for limit state design of breakwater. The breakwaters were redesigned by using the optimal load resistance factor and verified whether reliability indices larger than the target value. Finally, some load-resistance factors were proposed by changing target reliability index.