• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.77-85
• /
• 2014

The helical pile has become popular with some constructional advantages because relatively compact equipment is needed for installing helical piles. However, field loading tests for estimating the bearing capacity of helical piles have drawbacks that the required dead load should be as much as the operation load, and reaction piles or anchors are required. In this paper, the bi-directional load test without necessity of reaction piles and loading frames was applied to the helical pile, and the load-settlement curves of the helical piles were measured. The bi-directional load test was performed in two separate stages with the aid of a special hydraulic cylinder whose diameter is equal to that of the pile shaft. In the first stage, the hydraulic cylinder is assembled immediately above the bottom helix plate, and the end bearing capacity of the helical pile is measured. In the second stage, the hydraulic cylinder is assembled above the top helix plate, and the skin friction of the helical pile is measured. The pile loading-test program was carried out for the two different helical piles with the shaft diameter of 89 mm and 114 mm, respectively. However, the configuration of helix plates is identical with three helix plates of 450-, 350-, 200- mm diameter. Results of the bi-directional load test were verified by the conventional static pile loading test. As a result, the bearing capacity estimated by the bi-directional load test is in good agreement with the result of the conventional pile loading test.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.559-570
• /
• 2003

In this paper, we investigate a problem with Web-based learing contents and introduce the solving method of the problem. To be more accurate, existing Web-based learning contents were one fixd and uniformed courseware file with a large size and HTML format. Also, They were written files with authoring tools of which depended upon providing a multimedia vender. These learning contents were difficult to reuse among cyber education systems and change the applicable contents to the learner for learning experiences in time. So in this paper, we produced reusable and interopreable learning contents among instruction designers and education systems. They were deconstructed into smaller chunks and added to its properties. For the purpose of this producing method, we used the pedagogical designs for units of reuse. These are just turorial link-more and tell-more and was implemented with CBD method. As a result, The problem of existing Web-based learning contents system was resolved and then the power of understanding about objectified learning content was increased for the learner and instruction designers.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.202-205
• /
• 2011

최근 들어 스마트폰 시장이 활성화 되면서 휴대기기용 플랫폼인 안드로이드 역시 각광받고 있다. 오픈 플랫폼인 안드로이드에 수많은 제조사들과 개발자들이 가세하면서 다양한 플랫폼 버전이 탑재된 하드웨어가 출시되고 있다. 이처럼 혼재된 안드로이드 환경 때문에 상호호환성 문제와 함께 그에 따른 테스트의 필요성 또한 대두되고 있는 상황이다. 하지만 기존의 연구들은 테스트 케이스 자동 생성에 주로 초점이 맞추어져 있고, 컴파일 및 실행에 있어서 반복적인 작업이 필요한 안드로이드의 특성을 반영하지 못하고 있어 테스트 과정에 과도한 시간이 소모되고 인력 및 비용 또한 손실되고 있다. 이에 본 논문에서는 안드로이드 기반 소프트웨어 테스트 시 고려해야 할 문제점을 분석하여 비효율적인 면을 제거하고 테스트를 자동으로 진행할 수 있는 테스트 자동화 체계를 제안한다. 이를 통해 기존의 테스트 과정에서 과하게 투입되는 시간, 인력 및 비용을 줄이고 개발 기간이 짧은 안드로이드 소프트웨어 마켓 시장에 효율적으로 대응할 수 있는 이점을 얻을 수 있다.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.48-48
• /
• 2010

소형 공조장치용 냉매 압축기 부품인 기계식 제어 밸브는 에어컨 컴프레서의 핵심부품이고 년간 수백만 개가 국내에 수입된다. 이를 국산화 하기 위하여 진공로 속에서의 브레이징 공정이 수반되는 외국제품의 제조공정을 탈피하여 진공 속에서 DC 프로젝션 용접을 수행하는 기법을 개발하였다. 실린더 형상의 캡과 케이스를 맞대고 그 사이에 박판을 삽입한 상태에서 butt welding 방식으로 진행되는 본 공정에서는, 생산성이 높고 서보가압 장치를 사용하여 soft touch 를 구현하므로 프로젝션이 손상되지 않은 상태에서 통전이 시작되고 2 단 가압 및 프로파일 가압이 가능하므로 링(ring)형상의 너깃이 축대칭으로 안정적으로 형성되기 때문에 실린더 내부의 밀봉성능이 우수함을 확인하였다. 진공로 속에서 본 가압장치를 설치하여 간편한 방법으로 실린더 내부의 진공상태를 유지할 수 있기 때문에 진공로 속에서의 브레이징 공정이 적용되는 외국제품보다 생산성이 월등함을 알 수 있다. 본 연구에서 개발된 링 프로젝션(ring projection) 용접기법은 초소형 및 소형 실린더 형상의 부품 내부를 진공으로 유지해야 하는 산업현장에서 당장 적용될 수 있는 혁신적인 용접공정이라 판단된다.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.79-87
• /
• 2013

The purpose of this study focuses on the development of the lightweight BIM shape format(LBSF) structure to present the large volume BIM geometry object based on GIS as the viewpoint of the building facility management. Recently, the BIM-based facility management with GIS is researching with the purpose of the urban facility management etc. To implement these use-cases, the BIM geometry objects can be visualized based on urban level with GIS effectively. To do this, the lightweight BIM shape format is designed with the considerations and the prototype for the pilot test is implemented. In the pilot test phase, after developing the IFC file and LBSF file about the model data of the three areas, the performance with the data volume, the screen loading time etc was compared.

• Journal of Digital Contents Society
• /
• v.8 no.1
• /
• pp.93-106
• /
• 2007

Web Applications are rapidly increasing and the structure becomes very complicated. However, when users explore such complex Web applications, they cannot often grasp the current location and get the information that they want. Therefore, a novel approach to model the navigation of Web application contents is required. In this study, a framework has been presented for modeling adaptive context-based contents navigation of Web applications. The framework performs activities including navigation analysis, navigation design, and navigation realization. first, in navigation analysis domain is analyzed by using use case, focusing on navigation. Next, in navigation design three models have been produced: a navigation information model, a profile, and a navigation interface model. Finally, in navigation realization a Webpage navigation model and a component navigation model have been produced. In this work, several formal definitions and rules for checking validity of navigation model have also been provided.

• Spatial Information Research
• /
• v.21 no.4
• /
• pp.25-34
• /
• 2013

The purpose of this study is to develop an efficient BIM-based FM(Facility Management) system architecture to integrate the heterogeneous solution data related to FM. The heterogeneous solution data can be an FM system, asset management system, or facility sensor database systems, as well as files created by a modeler. In this study, we define the consideration for the external heterogeneous data integration related to BIM-based FM and propose the methodology. To implement it, trends in related studies were reviewed and general use cases of BIM-based FM were derived to develop the architecture for the integration between BIM and the heterogeneous solution data. The component architecture was designed to implement the use cases, and the schema was developed for the prototype by using the proposed architecture.

• The Korean Journal of Archival Studies
• /
• no.38
• /
• pp.75-124
• /
• 2013

This study aims, by paying attention to the special values of records of Constitutional Court, to discuss the characteristics of them and figuring out their present state, and to suggest some measures for improvement in the records management. First of all, I defined the concept of the records of Constitutional Court and its scope, and made an effort to comprehend their types and distinct features, and on the basis of which I tried to grasp the characteristics of the records. Put simply, the records of Constitutional Court are essential records indispensible to the application of Constitutional Court's documentation strategy of them, and they are valuable particularly at the level of the taking-root of democracy and the guarantee of human rights in a country. Owing to their characteristics of handling nationally important events, also, the context of the records is far-reaching to the records of other constitutional institutions and administrations, etc. In the second place, I analyzed Records Management Present State. At a division stage, I grasped the present state of creation, registration, and classification system of records. At an archives repository stage, I made efforts to figure out specifically the perseveration of records and the present of state of using them. On the basis of such figuring-outs of the present situation of records of Constitutional Court, I pointed at problems in how to manage them and suggested some measures to improve it in accordance with the problems, by dividing its process into four, Infrastructure, Process, Opening to the public and Application. In the infrastructure process, after revealing problems in its system, facilities, and human power, I presented some ways to improve it. In terms of its process, by focusing on classification and appraisal, I pointed out problems in them and suggested alternatives. In classification, I suggested to change the classification structure of trial records; in appraisal, I insisted on reconsidering the method of appropriating the retention periods of administration records, for it is not correspondent with reality in which, even in an file of a event, there are several different retention periods so it is likely for the context of the event worryingly to be segmented. In opening to the public and application, I pointed at problems in information disclosure at first, and made a suggestion of the establishment of a wide information disclosure law applicable to all sort of records. In application, I contended the expansion of the possibility of application of records and the scope of them through cooperation with other related-institutions.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.37-58
• /
• 2011

In general, testing DB applications is much more difficult than testing other types of software. The fact that the DB states as much as the input data influence and determine the procedures and results of program testing is one of the decisive reasons for the difficulties. In order to create and maintain proper DB states for testing, it not only takes a lot of time and efforts, but also requires extensive IT expertise and business knowledge. Despite the difficulties, there are not enough research and tools for the needed help. This article reports the result of research on automatic creation and maintenance of DB states for testing DB applications. As its core, this investigation develops an automation tool which collects relevant information from a variety of sources such as log, schema, tables and messages, combines collected information intelligently, and creates pre- and post-Images of database tables proper for application tests. The proposed procedures and tool are expected to be greatly helpful for overcoming inefficiencies and difficulties in not just unit and integration tests but including regression tests. Practically, the tool and procedures proposed in this research allows developers to improve their productivity by reducing time and effort required for creating and maintaining appropriate DB sates, and enhances the quality of DB applications since they are conducive to a wider variety of test cases and support regression tests. Academically, this research deepens our understanding and introduces new approach to testing enterprise systems by analyzing patterns of SQL usages and defining a grammar to express and process the patterns.

• Journal of the Korean Society of Radiology
• /
• v.10 no.6
• /
• pp.403-409
• /
• 2016

MRI scan is a useful method in the diagnosis of musculoskeletal excellent contrast of the organization. Depending on the patient's musculoskeletal examinations state the type of aids provided the aid is used there is also challenging as well as the costs do not vary. This study was produced by the use of 3D printing technology, an MRI aids. Aids in the production process, then through 3D modeling and then convert stl files using (3D MAX.2014, Fusion360) slicing programs (Cubicreater 2.1ver., Cura 15.4ver) converted to G-code printed on the FDM scheme (Cubicon Style, output was MICRO MAKE). Output is, but in the FDM to evaluate the SNR on the MRI images were compared to the test is the case before use, and then to produce a Water Phantom case of a PLA, ABS, a TPU thickness 3mm, using aids before, It was evaluated in a clinical image after qualitatively. Obtaining an image of SNR Warter Phantom appeared to have been evaluated as T1 NON $123.778{\pm}28.492$, PLA $123.522{\pm}28.373$, ABS $124.461{\pm}25.716$, TPU $124.843{\pm}27.272$. T2 NON $127.421{\pm}26.949$, was rated as PLA $124.501{\pm}27.768$, ABS $128.663{\pm}26.549$, TPU $130.171{\pm}25.998$. The results did not show statistically significant differences. The use of assistive devices before and after images Clinical evaluation method palliative $3.20{\pm}0.88$, $3.95{\pm}0.76$ after using the aids used to aid improved the quality of the image. Production of the auxiliary mechanism using a future 3D printing is expected are thought to be used clinically, it can be an aid making safe and comfortable than the inspection of the patient is an alternative to improve the problems of the aids used in the conventional do.