• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.137-137
• /
• 2004

최근, 나노 위치결정 시스템이 우주항공, 광통신, 의학 등 많은 분야에서 사용되고 있다. 이러한 나노위치결정 시스템에 있어서 가장 중요한 것은 안정성이다 열팽창과 가공에 의한 오차를 줄이기 위해 단일재료를 사용하고 대칭구조로 구성해야만 한다. 또한 나노 스케일의 분해능을 가지기 위해서는 스틱 슬립(stick-slip) 마찰이나 백래쉬(backlash) 기구가 없어야만 가능하다. 이러한 조건들을 만족하기 위해서 선행 연구자들은 유연힌지(flexure hinge)를 사용한 컴플라이언스 기구(compliance mechanism)를 제안하였고 이미 마이크로/나노 위치결정 시스템에 대한 연구와 개발이 이루어졌다.(중략)

• 기계저널
• /
• 제33권10호
• /
• pp.871-883
• /
• 1993

차량의 승차감 및 조안 성능을 결정하는 중요한 인자인 현가장치(Supension System) 설계의 최적화를 기하며 실차육성기간을 줄이고 설계 업무의 효율성을 높이기 위하여 각종 차량 특성 인자의 수치화를 통해 여러 가지 해석을 수행하게 된다. 이러한 해석 과정으로는 크게 현가장 치의 기구학적 특성-Kinematic Analysis-과 부시 (Bush)와 스프링 (Spring) 등의 컴플라이언스 (Compliance) 효과 - 쿼지스테틱 어낼러시스 (Quasistatic Analysis)-와 전체차량의 주행 시뮬 레이션 (simulation)을 통한 설계차량의주행안정성 검토-풀 비클 어낼러시스 (Full Vehicle Analysis)- 등이 있다. 이 글에서는 승용차의 현가장치중 대표적인형인 맥퍼슨 스터러트형에 대 하여 1) 기구학적 특성, 2) 부시와 스프링 등의 컴플라이언스 효과, 3) 전체차량의 주행 시뮬레 이션을 통한 차량의 주행 안정성 검토의 순으로 각 단계별 주요 검토 항목과 인자, 그리고 실제 차량에서의 현상에 대하여 소개한다.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.88-97
• /
• 1998

Compliance elements such as bushings of a suspension system play a crucial role in determining the ride and handling characteristics of the vehicle. In this paper, a general procedure is proposed for the optimum design of compliance elements to meet various design targets. Based on the assumption that the displacements of elastokinematic behavior of a suspension system under external forces are very small, linearized elastokinematic equations in terms of infinitesimal displacements and joint reaction forces are derived. Directly differentiating the linear elastokinematic equations with respect to design variables associated with bushing stiffness, sensitivity equations are obtained. The design process for determining the bushing stiffness using sensitivity analysis and optimization technique is demonstrated.

• 한국정밀공학회지
• /
• 제26권6호
• /
• pp.21-25
• /
• 2009

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1534-1541
• /
• 2005

Unlike industrial manipulators, the manipulators mounted on service robots are interacting with humans in various aspects. Therefore, safety has been one of the most important design issues. Many compliant robot arms have been introduced for safety. It is known that passive compliance method has faster response and higher reliability than active ones. In this paper, a new safety mechanism based on passive compliance is proposed. Passive mechanical elements, specifically transmission angle of the 4-bar linkage, springs and shock absorbing modules are incorporated into this safety mechanism. This mechanism works only when the robot arm exerts contact force much more than the human pain tolerance. Validity of this mechanism is verified by simulations and experiments. It is shown that the manipulator using this mechanism provides higher performance and safety than those using other passive compliance mechanisms or active methods.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.434-441
• /
• 2013

Bending motion has been used in the surgical instruments with bending structures and tendon mechanisms. A simplified bending angle amplification ratio between the proximal and distal bending joint was derived in this article. The bending structure of disk and rib in the proximal joint was analyzed based on finite element method with an emphasis on the circumferential uniformity of bending stiffness. Regarding the distal joint, optimal design and sensitivity analysis was done with four design variables of outer and inner diameter, rib height and rib width while maximizing the deformation under the stress distribution below the yield stress. Outer diameter and rib width are most critical to maximum deformation as the outer diameter and inner diameters are so to maximum equivalent stress.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.441-450
• /
• 2007

In this study, a 3-DOF XYZ micro parallel manipulator utilizing compliance mechanism is developed and analyzed. In so doing, a matrix method is used to rapidly solve displacements of the designed kinematic structure, and then kinematic characteristics of the developed manipulator are analyzed. Finally, the design analysis of the kinematic characteristics by changing hinge thickness and structure to improve workspace and translation motion is performed to show that the performance of the developed manipulator is relatively superior to the other similar kind of manipulators.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.13-22
• /
• 2008

For the accuracy correction of the micro-positioning industrial robot, micro-manipulator has been devised. The compliant mechanisms using piezoelectric actuators is necessary geometrically and structurally to be developed by the optimization approaches. The overall geometric advantage as the mechanical efficiencies of the mechanism are considered as objective functions, which respectively art the ratio of output displacement to input force, and their constraints are the vertical notion of supporting leg and the structural strength of manipulation. In optimizing the compliant mechanical amplifier, the sequential linear programming and an optimality criteria method are used for the geometrical dimensions of compliant bridges and flexure hinges. This paper presents the integrated design process which not only can maximize the mechanism feasibilities but also can ensure the positioning accuracy and sufficient workspace. Experiment and simulation are presented for validating the design process through the comparisons of the kinematical and structural performances.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.25-31
• /
• 2011

The purpose of the study is to enhance the vehicle handling stability of the PACE formula vehicle. Required data for the dynamic analysis of the vehicle are as follows: Mass, moment of inertia, and tire's dynamic properties. Mass and moment of inertia data were calculated using Siemens NX 5.0 which results were verified with VIMF measurements of GMDAT. Dynamic data for the tire were supplied by Kumho Tire. Aerodynamic forces play an important role in the formula vehicle which forces were calculated by using Fluent. Full vehicle dynamic analysis using Carsim software has been carried out to find out the improvement of the vehicle stability by changing the shapes of the rear wing.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.391-401
• /
• 1995

Several tests of the Double Cantilever Beam(DCB) were carried out for influence of the fiber orientation on the Mode I of the interlaminar fracture behavior in the Carbon/Epoxy composites. The interlaminar fracture toughness of Mode I was estimated based on the energy release rate of Mode I, $G_{I}$. The fracture toughness at crack initiation, $G_{IC}$, increases from type A to type E. The fracture toughness, $G_{IR}$ , is almost constant macroscopically for type A and type E when crack propagates. $G_{IR}$ for types B, C, D increases rapidly at the beginning of the crack growth then it decreases gradually. The fracture surface observation by SEM was also obtained the same results. Consequently the influence of the fiber orientation on the Mode I Interlaminar fracture behavior was made clear.ear.