• Title/Summary/Keyword: 컴퓨터모사

Search Result 197, Processing Time 0.036 seconds

Flow Lab. : Flow Visualization and Simulation (핵종이동 가시적 현상관찰및 수치모사)

  • Park Chung-Kyun;Cho Won-Jin;Hahn Pi1-Soo
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2005.11a
    • /
    • pp.134-142
    • /
    • 2005
  • The experimental setups for flow visualization and processes identification in laboratory scale (so cal led Flow Lab.) has developed to get ideas and answer fundamental questions of flow and migration in geologic media. The setup was made of a granite block of $50{\times}50cm$ scale and a transparent acrylate plate. The tracers used in this experiments were tritiated water, anions, and sorbing cations as well as an organic dye, eosine, to visualize migration paths. The migration plumes were taken with a digital camera as a function of time and stored as digital images. A migration model was also developed to describe and identify the transport processes. Computer simulation was carried out not only for the hydraulic behavior such as distributions of pressure and flow vectors in the fracture but also for the migration plume and the elution curves.

  • PDF

Numerical Simulation for Deposition Rate Distribution of AI Film by MOCVD Process (MOCVD법에 의한 AI 박막의 증착속도 분포에 대한 수치모사)

  • Jeong, Won-Yeong;Kim, Do-Hyeon
    • Korean Journal of Materials Research
    • /
    • v.6 no.1
    • /
    • pp.99-105
    • /
    • 1996
  • 본 연구에서는 TIMA를 전구체로 하는 수직형 MOCVD 반응기를 대상으로 수학적 모델을 세우고 컴퓨터에 의한 수치모사를 수행하여 반응기 설계 변수 및 공정조건이 AI의 증착속도와 증착두께 분포에 미치는 영향을 알아보았다. 수학적 모델은 수직형 반응기를 축대칭으로 보아 2차원으로 수립하였으며 반응기내의 운동량전달, 열전달, 물질전달을 포함한다. 이 수학적 모델의 지배 방정식들에 대하여 Galerkin 유한요소법을 적용하여 수치적으로 반응기 내의 유체 흐름 구조, 온도분포와 반응물의 농도 분포를 구하였다. 수치모사 결과 AI의 증착속도는 반응기 압력이 0.47torr, 기판온도가 25$0^{\circ}C$, 유량이 7.5sccm일 경우, 190-230$\AA$/min로 나타났다.

  • PDF

Technology Development of Process Dynamic Simulation and Its Application into LNG Carrier (공정 동적모사 기술개발과 LNG선에의 적용)

  • 정지범;유희종;이인구;김원배;윤용승
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1998.05a
    • /
    • pp.63-68
    • /
    • 1998
  • 공정에 대한 동적모사(dynamic simulation)는 최근의 컴퓨터 연산능력의 발전과 함께, 많은 새로운 적용 영역이 개발되고 있다. 특히 위험성이 높은 공정에 대한 이상상태 때의 반응상태를 정확히 예측하는 것은 대형사고의 예방과 설계 단계에서 최적의 시스템을 구축할 수 있도록 하여 준다는 측면에서 향후 국내의 공정설계 기술개발에 큰 도움을 줄 것으로 기대된다. 특히, 화공공정 등에 대한 여러 상업용 전산 패키지가 판매되고 있으나 특정분야에만 적용이 편리한 단점이 있고 공정을 정확히 이해하고 있다면 고가의 패키지를 대신하여 실제 공정에 적용이 가능한 동적모사기를 개발하는 것이 가능하다. (중략)

  • PDF

State-of-arts in Multiscale Simulation for Process Development (공정개발을 위한 다규모 모사에서의 연구현황)

  • Lim, Young-Il
    • Korean Chemical Engineering Research
    • /
    • v.51 no.1
    • /
    • pp.10-24
    • /
    • 2013
  • The state-of-arts of multiscale simulation (MSS) in science and engineering is briefly presented and MSS for process development (PD-MSS) is proposed to effectively apply the MSS to the process development. The four-level PD-MSS is composed of PLS (process-level simulation), FLS (fluid-level simulation), mFLS (microfluid-level simulation) and MLS (molecular-level simulation). Characteristics and methods of each level, as well as connectivity between the four levels are described. For example in PD-MSS, absorption column, fluidized-bed reactor, and adsorption process are introduced. For successful MSS, it is necessary to understand the multiscale nature in chemical engineering problems, to develop models representing physical phenomena at each scale and between scales, to develop softwares implementing mathematical models on computer, and to have strong computing facilities. MSS should be performed within acceptable accuracy of simulation results, available computation capacity, and reasonable efficiency of calculation. Macroscopic and microscopic scale simulations have been developed relatively well but mesoscale simulation shows a bottleneck in MSS. Therefore, advances on mesoscale models and simulation tools are required to accurately and reliably predict physical phenomena. PD-MSS will find its way into a sustainable technology being able to shorten the duration and to reduce the cost for process development.

Computer Simulation of Izod Impact Test for Impact Modifier Reinforced Nylon6 (충격보강제가 포함된 나일론 6에서 Izod 충격시험의 컴퓨터 모사)

  • Park, Yohan;Lyu, Min-Young;Paul, D.R.
    • Elastomers and Composites
    • /
    • v.48 no.2
    • /
    • pp.172-179
    • /
    • 2013
  • Impact modifier reinforced polymers are frequently used. In this study, Izod impact test has been simulated to analyze the mechanism of impact reinforcement of Nylon6 which contains impact modifier. The modeling of rubber particles added to Nylon6 as an impact modifier has been attempted. Based on the modeling, simulation of Izod impact test has been performed to observe the distribution and direction of stress at the cross-section of impact specimen. Three computer simulation models for Nylon6 were investigated. Those were without impact modifier, containing impact modifier without surface treatment, and containing impact modifier with surface treatment in the Nylon6. Simulation results showed that the stress which originated at the notch surface propergated to the inside of specimen round a impact modifier. In addition to that, impact modifier reinforced Nylon6 specimen showed low stress ditribution in the cross-section specially at notch surface. Principal stress in perpendicular direction to crack was also lowered in impact modifier reinforced Nylon6. These enhanced impact resistance reduced and crack propergations. Through this study it was realized that the computer simulation can be utilized to investigate the property enhacement of composite materials.

Application of computer graphics for a preliminary evaluation of dismantling scenario (컴퓨터 그래픽스를 이용한 해체 공정 시나리오 예비 평가)

  • Park Hee-Seong;Kim Sung-Kyun;Lee Kyne-Woo;Jung Chong-Hun;Park Jin-Ho;Jin Seong-Il
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2006.05a
    • /
    • pp.1311-1314
    • /
    • 2006
  • 원자력 시설 및 연구용 원자로 해체 시 해체 공정의 효율성을 증진시키기 위해 컴퓨터 그래픽스를 이용한 해체 공정의 최적화 연구가 수행되었다. 애니메이션 설계를 위해 해체 시설 및 구조물과 해체 장비의 모델링이 완료되었으며, 방사능에 오염된 대상물의 방사능 분포도를 위치별, 준위별로 확인할 수 있도록 3 차원으로 나타내었다. 해체 일정과 해체 폐기물량 그리고 해체 비용을 모사하기 위해 각 정보들에 대한 평가식과 가중치 값을 도출하였다. 연구로 1 호기 Thermal column 을 대상으로 애니메이션을 통한 해체 공정절차 시각화와 단위 해체 공정 시나리오를 수행한 결과 애니메이션의 경우 해체 현장과 동일하게 모델링 되어 현장 작업자들이 해체 공정 절차를 쉽게 이해할 수 있다는 것을 확인하였으며, 시나리오 별 해체 소요시간과 폐기물량 그리고 해체 비용의 경우 정상적으로 모사가 수행됨으로써 단위 해체 공정에 대한 최적의 시나리오를 평가 할 수 있는 기초 연구의 틀을 마련하였다. 본 시스템은 해체 관리자, 해체 시스템 분석가, 해체 현장 감독과 해체 작업자들의 중요한 협업도구로 활용될 것으로 사료된다.

  • PDF