• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.171-177
• /
• 2008

In this paper we compared the performance of interpolation algorithms for Bayer patterned image sensors under the various illumination intensities. As the interpolation algorithms, we used bilinear color interpolation and adaptive fuzzy color interpolation and our experimentation shows that performance of interpolation algorithms depend on the lighting conditions; in low intensity of illumination, bilinear color interpolation with median filter performs best, in high intensity of illumination, adaptive fuzzy color interpolation performs best, and in between bilinear color interpolation performs best. This study suggested an interpolation scheme which applies different interpolation algorithm according to the intensity of the input image, resuting in the better image quality.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.67-69
• /
• 2010

대부분의 디지털 카메라는 컬러 필터 배열(Color Filter Array)을 가진 하나의 영상 획득 센서를 사용한다. 따라서 영상획득 이후에 컬러 보간 알고리즘이 필수적으로 진행된다. 또 영상 획득 과정에서 센서의 열화나 암전류 등과 같은 잡음이 발생하여 영상 잡음 제거 알고리즘이 필요하다. 하지만 기존의 대부분의 영상 잡음 제거 알고리즘은 컬러 필터 배열 영상의 특징인 모자이크 데이터 기반이 아닌 컬러 보간 이후의 풀 컬러영상에(YCbCr) 적용되고 있다. 따라서 잡음이 포함된 영상으로 컬러 보간을 할 경우 잡음의 공간적 상관관계(spatial correlation)가 커짐에 의한 잡음 번짐 때문에 컬러 보간 이후의 잡음제거는 더욱 어렵게 된다. 이와 같은 문제를 해결하기 위해 컬러 필터 배열 영상에 대한 잡음제거 알고리즘이 연구되고 있으며, 본 논문에서도 CMOS/CCD의 이미지 센서에서 획득된 베이어 컬러 필터 배열 영상에서 잡음을 제거하는 알고리즘을 제안한다. 이를 위해서 베이어 컬러 필터 배열 영상 데이터에서 경계(edge)의 방향성을 고려한 LMMSE 방법을 기반으로 한 잡음제거 알고리즘을 제안한다. 제안하는 알고리즘은 영상의 경계를 보존해주며 잡음제거 과정 다음에 진행되는 컬러 보간 과정에서의 잡음 번짐의 문제를 해결할 수 있다. 실험 결과를 통해 향상된 잡음 제거 효과를 확인하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.59-70
• /
• 2010

Each pixels become got pixel value for color of only one from among colors because of bayer pattern that light receiving device of image sensor which is used in HHP and digital camera writes only one color. Information of the missing pixels could infer perfect color image from using information of neighbor pixels by using CFA(Color Filter Array). In this paper, we derive relation between the average of the data from the light receiving device of image sensor and each color channel data. And by using this relation, a new efficient edge color fuzzy method for color interpolation is proposed. Also, missing luminance signal channel interpolation was fuzzy interpolation along any edges direction for reducing color noise and interpolating efficiently it. And in this paper, the proposed method has been proved improving average 2.4dB than the conventional method by using PSNR. Also, resolution of the image of the proposed method was similar to the original image by visual images, we has been verified to be decreased a chromatic aberration than image of conventional algorithms with simulation result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1216-1223
• /
• 2006

In many imaging devices, a single image sensor is used, which is covered by a color filter array to filter out the specific color components from light. Since an image acquired from this image sensors have a color components at each pixel, it is needed to be reconstructed to a perfect image. In this paper, a new color interpolation method for the imaging devices having a single image sensor is proposed. The proposed method improves a edge sensing function to obtain satisfactory results in edges of an image, md presents a new inter-channel correlation for improving interpolation performance in smooth region. We have compared our method with several exiting methods, and our experimental results have proved better interpolation performance in comparing with the other results.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.619-630
• /
• 2013

In this paper, we propose an edge directed color demosaicing algorithm considering color channel correlation. The proposed method consists of local region classification step and edge directional interpolation step. In the first step, each region of a given Bayer image is classified as normal edge, pattern edge, and flat regions by using intra channel and inter channel gradients. Especially, two criteria and verification process for the normal edge and pattern edge classification are used to reduce edge direction estimation error, respectively. In the second step, edge directional interpolation process is performed according to characteristics of the classified regions. For horizontal and vertical directional interpolations, missing color components are obtained from interpolation equations based on intra channel and inter channel correlations in order to improve the performance of the directional interpolations. The simulation results show that the proposed algorithm outperforms conventional approaches in both objective and subjective terms.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.68-74
• /
• 2017

This paper presents a joint demosaicking and arbitrary-ratio down sampling algorithm for color filter array (CFA) images. Color demosaiking is a necessary part of image signal processing pipeline for many types of digital image recording system using single sensor. Also, such as smart phone, obtained high resolution image from image sensor has to be down-sampled to be displayed on the screen. The conventional solution is "Demosaicking first and down sampling later". However, this scheme requires a significant amount of memory and computational cost. Also, artifacts can be introduced or details get damaged during demosaicking and down sampling process. In this paper, we propose a method in which demosaicking and down sampling are working simultaneously. We use inverse mapping of Bayer CFA and then joint demosaicking and down sampling with arbitrary-ratio scheme based on signal decomposition of high and low frequency component in input data. Experimental results show that our proposed algorithm has better image quality performance and much less computational cost than those of conventional solution.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.205-215
• /
• 2013

In digital imaging system, Bayer pattern is widely used and the observed image is degraded by optical blur during image acquisition process. Generally, demosaicing and deblurring process are separately performed in order to convert a blurred Bayer image to a high resolution color image. However, the demosaicing process often generates visible artifacts such as zipper effect and Moire artifacts when performing interpolation across edge direction in Bayer pattern image. These artifacts are emphasized by the deblurring process. In order to solve this problem, this paper proposes a deblurring algorithm combined with edge directional color demosaicing method. The proposed method is consisted of interpolation step and region classification step. Interpolation and deblurring are simultaneously performed according to horizontal and vertical directions, respectively during the interpolation step. In the region classification step, characteristics of local regions are determined at each pixel position and the directionally obtained values are region adaptively fused. Also, the proposed method uses blur model based on wave optics and deblurring filter is calculated by using estimated characteristics of local regions. The simulation results show that the proposed deblurring algorithm prevents the boosting of artifacts and outperforms conventional approaches in both objective and subjective terms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12C
• /
• pp.1138-1146
• /
• 2009

Digital cameras adopting a single CCD detector collect image color by subsampling in three color planes and successively interpolating the information to reconstruct full-resolution color images. Therefore, to recovery of a full-resolution color image from a color filter array (CFA) like the Bayer pattern is generally considered as an interpolation issue for the unknown color components. In this paper, we first calculate luminance component value by combining R, G, B channel component information which is quite different from the conventional demosaicing algorithm. Because conventional system calculates G channel component followed by computing R and B channel components. Integrating the obtained gradient edge information and the improved weighting function in luminance component, a new edge sensitive demosaicing technique is presented. Based on 24 well known testing images, simulation results proved that our presented high-quality demosaicing technique shows the best image quality performance when compared with several recently presented techniques.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1581-1588
• /
• 2010

Most digital cameras use a single image sensor with Color Filter Array(CFA) for the advantage of costs and speed. The various color interpolation(demosaicing) algorithms are researched to reconstruct a full representation of the image. In this paper, we proposed a method of demosaicing about using weighted directional filter for vertical, horizontal, and diagonal direction edge. The method considered the efficiency of hardware resources for hardware implementation. The performance of proposed method was confirmed by comparing the conventional method in experiments using 24 Kodak test images. The proposed method was designed by Verilog HDL and was verified by using Virtex4 FPGA boards and CMOS Image Sensor.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.11a
• /
• pp.230-232
• /
• 2013

본 논문은 에지맵 기반의 삼차 스플라인 보간 방법을 이용한 컬러 디모자이킹 방법을 제안한다. 삼차 스플라인 보간 방법은 데이터 집합에 부드러운 곡선을 만드는 방법으로, 부드러운 영상을 만들기에 적합하다. 상, 하, 좌, 우 총 4가지 방향에 대하여 각각의 예측치를 얻어내고, 각 컬러 채널의 에지맵을 이용하여 최종적인 값을 보간한다. 실험결과에서는 기존의 보간 방법보다 주관적 화질과 Peek Signal to Noise Ratio(PSNR) 측면에서 더 나은 성능을 보였다.